Redis 2.6.10

Otherwise we end with less reliable connections because it's too easy
that a single packet gets lost.

.gitignore

@@ -1,14 +1,8 @@
 .*.swp
 *.o
+*.rdb
 *.log
-dump.rdb
-redis-benchmark
-redis-check-aof
-redis-check-rdb
-redis-check-dump
-redis-cli
-redis-sentinel
-redis-server
+redis-*
 doc-tools
 release
 misc/*
@@ -20,11 +14,9 @@ src/transfer.sh
 src/configs
 redis.ds
 src/redis.conf
-src/nodes.conf
 deps/lua/src/lua
 deps/lua/src/luac
 deps/lua/src/liblua.a
 .make-*
 .prerequisites
 *.dSYM
-Makefile.dep

00-RELEASENOTES

@@ -1,16 +1,350 @@
-Hello! This file is just a placeholder, since this is the "unstable" branch
-of Redis, the place where all the development happens.
+Redis 2.6 release notes
+=======================
 
-There is no release notes for this branch, it gets forked into another branch
-every time there is a partial feature freeze in order to eventually create
-a new stable release.
+** IMPORTANT ** Check the 'Migrating from 2.4 to 2.6' section at the end of
+                this file for information about what changed between 2.4 and
+                2.6 and how this may affect your application.
 
-Usually "unstable" is stable enough for you to use it in development environments
-however you should never use it in production environments. It is possible
-to download the latest stable release here:
+--------------------------------------------------------------------------------
+Upgrade urgency levels:
 
-    http://download.redis.io/releases/redis-stable.tar.gz
+LOW:      No need to upgrade unless there are new features you want to use.
+MODERATE: Program an upgrade of the server, but it's not urgent.
+HIGH:     There is a critical bug that may affect a subset of users. Upgrade!
+CRITICAL: There is a critical bug affecting MOST USERS. Upgrade ASAP.
+--------------------------------------------------------------------------------
 
-More information is available at http://redis.io
+--[ Redis 2.6.10 ]
 
-Happy hacking!
+UPGRADE URGENCY: MODERATE, this release contains many non-critical fixes
+                 and many small improvements.
+
+* [BUGFIX]   redis-cli --rdb, fixed when the server sends newlines to ping.
+* [BUGFIX]   redis-cli, minor fixes on connection handling, prompt.
+* [BUGFIX]   Slow log: don't log EXEC, just executed commands.
+* [BUGFIX]   On failed shutdown don't try again and again compulsively.
+* [BUGFIX]   Fix build on sunos without backtrace().
+* [BUGFIX]   UNSUBSCRIBE and PUNSUBSCRIBE: always provide a reply (see 742e580)
+* [BUGFIX]   Lua struct library was broken, upgraded.
+* [BUGFIX]   Fix a bug in srandmemberWithCountCommand() with count argument.
+* [BUGFIX]   Test: disable clients timeout to prevent issues on slow systems.
+* [BUGFIX]   Sentinel: don't advertise the promoted slave as master too early.
+* [IMPROVED] Whitelist SIGUSR1, see http://redis.io/topics/signals.
+* [IMPROVED] Simpler to understand redis-cli --bigkeys output.
+* [IMPROVED] Test now works with tclsh > 8.5.
+* [IMPROVED] Added option to turn of the Nagle algorithm in slave socket.
+* [IMPROVED] Optionally use SO_KEEPALIVE to detect dead peers.
+
+--[ Redis 2.6.9 ]
+
+UPGRADE URGENCY: MODERATE if you use replication.
+
+* [BUGFIX]   Changing master at runtime (SLAVEOF command) in presence of
+             network problems, or in very rapid succession, could result
+             in non-critical problems (GitHub Issue #828).
+* [IMPROVED] CLINGET GETNAME and SETNAME to set and query connection names
+             reported by CLIENT LIST. Very useful for debugging of
+             problems.
+* [IMPROVED] redis-cli is now able to transfer an RDB file from a remote
+             server to a local file using the --rdb <filename> command
+             line option.
+
+--[ Redis 2.6.8 ]
+
+UPGRADE URGENCY: MODERATE if you use Lua scripting. Otherwise LOW.
+
+* [BUGFIX]   Multiple fixes for EVAL (issue #872).
+* [BUGFIX]   Fix overflow in mstime() in redis-cli and benchmark.
+* [BUGFIX]   Fix Linux / PPC64 behavior by correcting endianess detection.
+* [BUGFIX]   Fix NetBSD build by defining _XOPEN_SOURCE appropriately.
+* [BUGFIX]   Added missing license and copyright in a few places.
+* [BUGFIX]   Better error reporting when fd event creation fails.
+
+--[ Redis 2.6.7 ]
+
+UPGRADE URGENCY: MODERATE (unless you BLPOP using the same key multiple times).
+
+* [BUGFIX]   Don't crash if BLPOP & co are called with the same key repeated
+             multiple times (Issue #801).
+
+--[ Redis 2.6.6 ]
+
+UPGRADE URGENCY: CRITICAL if you experienced one more more crashes.
+                 MODERATE if Redis is running fine for you.
+
+* [BUGFIX]   Jemalloc updated to 3.2.0.
+
+--[ Redis 2.6.5 ]
+
+UPGRADE URGENCY: MODERATE
+
+Warning: this release of Redis introduces a different behavior in MULTI/EXEC
+         handling of errors. This was done because the new behavior is safer
+         compared to the old one, and should not break any code targeting
+         Redis 2.6 in a critical way.
+
+         For more information check http://redis.io/topics/transactions
+
+* [IMPROVED] RDB/AOF childern now log amount of additional memory used
+             because of copy on write.
+* [BUGFIX]   MIGRATE non critical fixes (see commits for details).
+* [BUGFIX]   MULTI/EXEC: now EXEC aborts on errors before EXEC.
+* [BUGFIX]   Fix integer overflow in zunionInterGenericCommand resulting
+             into Z[INTER|UNION][STORE] commands to crash under extremely
+             unlikely conditions (almost impossible in real world).
+* [BUGFIX]   EVALSHA is now case insensitive (and will not crash).
+
+--[ Redis 2.6.4 ]
+
+UPGRADE URGENCY: LOW
+
+* [IMPROVED] BSD license and copyright notice added to every .c and .h file.
+
+--[ Redis 2.6.2 ]
+
+UPGRADE URGENCY: LOW
+
+* [BUGFIX]   The compilation fix for RHLE5 in 2.6.1 was broken. Fixed.
+* [IMPROVED] Linenoise updated, now supports Ctrl+w.
+
+---[ Redis 2.6.1 ]
+
+UPGRADE URGENCY: LOW
+
+* [BUGFIX]   Compilation on Linux < 2.6.17 or glibc < 2.6 fixed (RHLE5 & co).
+
+---[ Redis 2.6.0 ]
+
+UPGRADE URGENCY: HIGH
+
+* [BUGFIX]   Allow AUTH when server is in -BUSY state because of a slow script.
+* [BUGFIX]   MULTI/EXEC flow now makes sense when observed in MONITOR
+* [BUGFIX]   SCRIPT KILL now uses different error prefixes for different errors.
+* [BUGFIX]   Default memory limit for 32bit archs lowered from 3.5 to 3 GB.
+* [BUGFIX]   redis-check-dump is now compatible with RDB files generated by 2.6.
+* [IMPROVED] New field in INFO: slave_read_only.
+
+---[ Redis 2.5.14 (2.6 Release Candidate 8) ]
+
+* [BUGFIX]   Fixed compilation on FreeBSD.
+* [IMPROVED] SRANDMEMBER <count> that returns multiple random elements.
+* [IMPROVED] Sentinel backported to 2.6. It will be taken in sync with 2.8.
+* [IMPROVED] Helper function for scripting to return errors and status replies.
+* [IMPROVED] SORT by nosort [ASC|DESC] uses sorted set elements ordering.
+* [BUGFIX]   Better resistence to system clock skew.
+* [IMPROVED] Warn the user when the configured maxmemory seems odd.
+* [BUGFIX]   Hashing function is now murmurhash2 for security purposes.
+* [IMPROVED] Install script no longer uses a template but redis.conf itself.
+
+---[ Redis 2.5.13 (2.6 Release Candidate 7) ]
+
+UPGRADE URGENCY: HIGH
+
+* [BUGFIX]   Theoretical bug in ziplist fixed.
+* [BUGFIX]   Better out of memory handling (Log produced in log file).
+* [BUGFIX]   Incrementally flush RDB file on slave side while performing the
+             first synchronization with the master. This makes Redis less
+             blocking in environments where disk I/O is slow.
+* [BUGFIX]   Don't crash with Lua's redis.call() without arguments.
+* [BUGFIX]   Don't crash after a big number of Lua calls on 32 bit systems
+             because of a failed assertion.
+* [BUGFIX]   Fix SORT behaviour when called from scripting.
+* [BUGFIX]   Adjust slave PING period accordingly to REDIS_HZ define.
+* [BUGFIX]   BITCOUNT: fix crash on overflowing arguments.
+* [BUGFIX]   Return an error when SELECT argument is not an integer.
+* [BUGFIX]   Blocking operations on lists were completely reimplemented for
+             correctness. Now blocking list ops and pushes originated from
+             Lua scripts will play well together and will be replicated
+             and transmitted to the AOF correctly.
+* [IMPROVED] Send async PING before starting replication to avoid blocking if
+             master allows us to connect but it is actually not able to reply.
+* [IMPROVED] Support slave-priority for Redis Sentinel.
+* [IMPROVED] Hiredis library updated.
+
+---[ Redis 2.5.12 (2.6 Release Candidate 6) ]
+
+UPGRADE URGENCY: MODERATE.
+
+* [BUGFIX]   Fixed a timing attack on AUTH (Issue #560).
+* [BUGFIX]   Don't assume that "char" is signed.
+* [BUGFIX]   Check that we have connection before enabling pipe mode.
+* [BUGFIX]   Use the optimized version of the function to convert a double to
+             its string representation. Compilation was disabled because of
+             a typo in the #if statement.
+* [IMPROVED} REPLCONF internal command introduced, now INFO shows slaves with
+             correct port numbers. This makes 2.5.12 Redis Sentinel compatible.
+* [IMPROVED] Truncate short write from the AOF for a cleaner restart. On short
+             writes (for instance out of space) Redis will now try to remove
+             the half-written data so that the next restart will work without
+             the need for the "redis-check-aof" utility.
+* [IMPROVED] New in INFO: aof_last_bgrewrite_status
+* [IMPROVED] Allow Pub/Sub in contexts where other commands are blocked.
+* [BUGFIX]   mark fd as writable when EPOLLERR or EPOLLHUP is returned by
+             epoll_wait.
+
+---[ Redis 2.5.11 (2.6 Release Candidate 5) ]
+
+UPGRADE URGENCY: HIGH.
+
+* [BUGFIX]   Fixed Hash corruption when loading an RDB file generated by
+             previous versions of Redis that encoded hashes using
+             a different ziplist encoding format for small integers.
+             All the fileds that are integers in the range 0-255 may not
+             be recognized, or duplicated un updates, causing a crash
+             when the ziplist is converted to a real hash. (Issue #547).
+* [BUGFIX]   Fixed the count of memory used by output buffers in the
+             setDeferredMultiBulkLength() function.
+
+---[ Redis 2.5.10 (2.6 Release Candidate 4) ]
+
+UPGRADE URGENCY: HIGH.
+
+* [BUGFIX]   Allow PREFIX to be overwritten on "make install".
+* [BUGFIX]   Run the test with just one client if the computer is slow.
+* [BUGFIX]   Event port support in our event driven libray.
+* [BUGFIX]   Jemalloc updated to 3.0.0. This fixes a possibly AOF rewrite issue.
+             See https://github.com/antirez/redis/issues/504 for info.
+* [BUGFIX]   Fixed issue #516: ZINTERSTORE / ZUNIONSTORE with mixed sets/zsets.
+* [BUGFIX]   Set fd to writable when poll(2) detects POLLERR or POLLHUP event.
+* [BUGFIX]   Fixed RESTORE hash failure (Issue #532).
+* [IMPROVED] Allow an AOF rewrite buffer > 2GB (Related to issue #504).
+* [IMPROVED] Server cron function frequency is now configurable (REDIS_HZ).
+* [IMPROVED] Better, less blocking expired keys collection algorithm.
+* [FEATURE]  New commands: BITOP and BITCOUNT.
+* [FEATURE]  redis-cli --pipe for mass import.
+
+What's new in Redis 2.5.9 (aka 2.6 Release Candidate 3)
+=======================================================
+
+UPGRADE URGENCY: critical, upgrade ASAP.
+
+* [BUGFIX] Fix for issue #500 (https://github.com/antirez/redis/pull/500).
+           Redis 2.6-RC1 and RC2 may corrupt ziplist-encoded sorted sets
+           produced by Redis 2.4.x.
+* [BUGFIX] Fixed several bugs in init.d script.
+* [BUGFIX] syncio.c functions modified for speed and correctness. On osx
+           (and possibly other BSD-based systems) the slave would block on
+           replication to send the SYNC command when the master was not
+           available. This is fixed now, but was not affecting Linux installs.
+* Now when slave-serve-stale-data is set to yes and the master is down, instead
+  of reporting a generic error Redis replies with -MASTERDOWN.
+
+What's new in Redis 2.5.8 (aka 2.6 Release Candidate 2)
+=======================================================
+
+UPGRADE URGENCY: high for all the users of the KEYS command, otherwise low.
+
+* [BUGFIX] Fix for KEYS command: if the DB contains keys with expires the KEYS
+           command may return the wrong output, having duplicated or missing
+           keys. See issue #487 and #488 on github for details.
+
+What's new in Redis 2.5.7 (aka 2.6 Release Candidate 1)
+=======================================================
+
+UPGRADE URGENCY: upgrade not recommended because this is an RC release.
+
+* This is the first release candidate for Redis 2.6. We are not aware of
+  bugs, but part of this code is young and was never tested in production
+  environments, so handle with care.
+
+An overview of new features and changes in Redis 2.6.x
+======================================================
+
+* Server side Lua scripting, see http://redis.io/commands/eval
+* Virtual Memory removed (was deprecated in 2.4)
+* Hardcoded limits about max number of clients removed.
+* AOF low level semantics is generally more sane, and especially when used
+  in slaves.
+* Milliseconds resolution expires, also added new commands with milliseconds
+  precision (PEXPIRE, PTTL, ...).
+* Better memory usage for "small" lists, ziplists and hashes when fields or
+  values contain small integers.
+* Read only slaves.
+* New bit opeations: BITCOUNT and BITOP commands.
+* Clients max output buffer soft and hard limits. You can specifiy different
+  limits for different classes of clients (normal,pubsub,slave).
+* More incremental (less blocking) expired keys collection algorithm, in
+  practical terms this means that Redis is more responsive when a very
+  big number of keys expire about at the same time.
+* AOF is now able to rewrite aggregate data types using variadic commands,
+  often producing an AOF that is faster to save, load, and is smaller in size.
+* Every redis.conf directive is now accepted as a command line option for the
+  redis-server binary, with the same name and number of arguments.
+* Hash table seed randomization for protection against collisions attacks.
+* Performances improved when writing large objects to Redis.
+* Integrated memory test, see redis-server --test-memory.
+* INCRBYFLOAT and HINCRBYFLOAT commands.
+* New DUMP, RESTORE, MIGRATE commands (back ported from Redis Cluster to 2.6).
+* CRC64 checksump in RDB files.
+* Better MONITOR output and behavior (now commands are logged before execution).
+* "Software Watchdog" feature to debug latency issues.
+* Significant parts of the core refactored or rewritten. New internal APIs
+  and core changes allowed to develop Redis Cluster on top of the new code,
+  however for 2.6 all the cluster code was removed, and will be released with
+  Redis 3.0 when it is more complete and stable.
+* Redis ASCII art logo added at startup.
+* Crash report on memory violation or failed asserts improved significantly
+  to make debugging of hard to catch bugs simpler.
+* redis-benchmark improvements: ability to run selected tests,
+  CSV output, faster, better help.
+* redis-cli improvements: --eval for comfortable development of Lua scripts.
+* SHUTDOWN now supports two optional arguments: "SAVE" and "NOSAVE".
+* INFO output split into sections, the command is now able to just show 
+  pecific sections.
+* New statistics about how many time a command was called, and how much
+  execution time it used (INFO commandstats).
+* More predictable SORT behavior in edge cases.
+* Better support for big endian and *BSD systems.
+* Build system improved.
+
+Migrating from 2.4 to 2.6
+=========================
+
+Redis 2.4 is mostly a strict subset of 2.6. However there are a few things
+that you should be aware of:
+
+* You can't use .rdb and AOF files generated with 2.6 into a 2.4 instance.
+* 2.6 slaves can be attached to 2.4 masters, but not the contrary, and only
+  for the time needed to perform the version upgrade.
+
+There are also a few API differences, that are unlikely to cause problems,
+but it is better to keep them in mind:
+
+* SORT now will refuse to sort in numerical mode elements that can't be parsed
+  as numbers.
+* EXPIREs now all have millisecond resolution (but this is very unlikely to
+  break code that was not conceived exploting the previous resolution error
+  in some way.)
+* INFO output is a bit different now, and contains empty lines and comments
+  starting with '#'. All the major clients should be already fixed to work
+  with the new INFO format.
+* Slaves are only read-only by default (but you can change this easily
+  setting the "slave-read-only" configuration option to "no" editing your
+  redis.conf or using CONFIG SET.
+
+The following INFO fields were renamed for consistency:
+
+     changes_since_last_save -> rdb_changes_since_last_save
+     bgsave_in_progress -> rdb_bgsave_in_progress
+     last_save_time -> rdb_last_save_time
+     last_bgsave_status -> rdb_last_bgsave_status
+     bgrewriteaof_in_progress -> aof_rewrite_in_progress
+     bgrewriteaof_scheduled -> aof_rewrite_scheduled
+
+The following redis.conf and CONFIG GET / SET parameters changed:
+
+    * hash-max-zipmap-entries, now replaced by hash-max-ziplist-entries
+    * hash-max-zipmap-value, now replaced by hash-max-ziplist-value
+    * glueoutputbuf option was now completely removed (was deprecated)
+
+--------------------------------------------------------------------------------
+
+Credits: Where not specified the implementation and design are done by
+Salvatore Sanfilippo and Pieter Noordhuis. Thanks to VMware for making all
+this possible. Also many thanks to all the other contributors and the amazing
+community we have.
+
+See commit messages for more credits.
+
+Cheers,
+Salvatore

BUGS

@@ -1 +1 @@
-Please check https://github.com/antirez/redis/issues
+Plese check https://github.com/antirez/redis/issues

CONTRIBUTING

@@ -8,33 +8,27 @@ each source file that you contribute.
 # IMPORTANT: HOW TO USE REDIS GITHUB ISSUES
 
 * Github issues SHOULD ONLY BE USED to report bugs, and for DETAILED feature
-  requests. Everything else belongs to the Redis Google Group:
-      
-      https://groups.google.com/forum/m/#!forum/Redis-db
+  requests. Everything else belongs to the Redis Google Group.
 
   PLEASE DO NOT POST GENERAL QUESTIONS that are not about bugs or suspected
   bugs in the Github issues system. We'll be very happy to help you and provide
-  all the support at the Reddit sub:
+  all the support in the Redis Google Group.
 
-      http://reddit.com/r/redis
-
-  There is also an active community of Redis users at Stack Overflow:
-
-      http://stackoverflow.com/questions/tagged/redis
+  Redis Google Group address:
+  
+      https://groups.google.com/forum/?fromgroups#!forum/redis-db
 
 # How to provide a patch for a new feature
 
-1. If it is a major feature or a semantical change, please post it as a new submission in r/redis on Reddit at http://reddit.com/r/redis. Try to be passionate about why the feature is needed, make users upvote your proposal to gain traction and so forth. Read feedbacks about the community. But in this first step **please don't write code yet**.
+1. Drop a message to the Redis Google Group with a proposal of semantics/API.
 
-2. If in step 1 you get an acknowledgment from the project leaders, use the
+2. If in steps 1 you get an acknowledge from the project leaders, use the
    following procedure to submit a patch:
 
     a. Fork Redis on github ( http://help.github.com/fork-a-repo/ )
     b. Create a topic branch (git checkout -b my_branch)
     c. Push to your branch (git push origin my_branch)
-    d. Initiate a pull request on github ( https://help.github.com/articles/creating-a-pull-request/ )
+    d. Initiate a pull request on github ( http://help.github.com/send-pull-requests/ )
     e. Done :)
 
-For minor fixes just open a pull request on Github.
-
 Thanks!

COPYING

@@ -1,4 +1,4 @@
-Copyright (c) 2006-2015, Salvatore Sanfilippo
+Copyright (c) 2006-2012, Salvatore Sanfilippo
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

MANIFESTO

@@ -4,64 +4,17 @@
 Redis Manifesto
 ===============
 
-1 - A DSL for Abstract Data Types. Redis is a DSL (Domain Specific Language)
-    that manipulates abstract data types and implemented as a TCP daemon.
-    Commands manipulate a key space where keys are binary-safe strings and
-    values are different kinds of abstract data types. Every data type
-    represents an abstract version of a fundamental data structure. For instance
-    Redis Lists are an abstract representation of linked lists. In Redis, the
-    essence of a data type isn't just the kind of operations that the data types
-    support, but also the space and time complexity of the data type and the
-    operations performed upon it.
+1 - A DSL for Abstract Data Types. Redis is a DSL (Domain Specific Language) that manipulates abstract data types and implemented as a TCP daemon. Commands manipulate a key space where keys are binary-safe strings and values are different kinds of abstract data types. Every data type represents an abstract version of a fundamental data structure. For instance Redis Lists are an abstract representation of linked lists. In Redis, the essence of a data type isn't just the kind of operations that the data types support, but also the space and time complexity of the data type and the operations performed upon it.
 
-2 - Memory storage is #1. The Redis data set, composed of defined key-value
-    pairs, is primarily stored in the computer's memory. The amount of memory in
-    all kinds of computers, including entry-level servers, is increasing
-    significantly each year. Memory is fast, and allows Redis to have very
-    predictable performance. Datasets composed of 10k or 40 millions keys will
-    perform similarly. Complex data types like Redis Sorted Sets are easy to
-    implement and manipulate in memory with good performance, making Redis very
-    simple. Redis will continue to explore alternative options (where data can
-    be optionally stored on disk, say) but the main goal of the project remains
-    the development of an in-memory database.
+2 - Memory storage is #1. The Redis data set, composed of defined key-value pairs, is primarily stored in the computer's memory. The amount of memory in all kinds of computers, including entry-level servers, is increasing significantly each year. Memory is fast, and allows Redis to have very predictable performance.  Datasets composed of 10k or 40 millions keys will perform similarly.  Complex data types like Redis Sorted Sets are easy to implement and manipulate in memory with good performance, making Redis very simple.  Redis will continue to explore alternative options (where data can be optionally stored on disk, say) but the main goal of the project remains the development of an in-memory database.
 
-3 - Fundamental data structures for a fundamental API. The Redis API is a direct
-    consequence of fundamental data structures. APIs can often be arbitrary but
-    not an API that resembles the nature of fundamental data structures. If we
-    ever meet intelligent life forms from another part of the universe, they'll
-    likely know, understand and recognize the same basic data structures we have
-    in our computer science books. Redis will avoid intermediate layers in API,
-    so that the complexity is obvious and more complex operations can be
-    performed as the sum of the basic operations.
+3 - Fundamental data structures for a fundamental API. The Redis API is a direct consequence of fundamental data structures. APIs can often be arbitrary but not an API that resembles the nature of fundamental data structures. If we ever meet intelligent life forms from another part of the universe, they'll likely know, understand and recognize the same basic data structures we have in our computer science books. Redis will avoid intermediate layers in API, so that the complexity is obvious and more complex operations can be performed as the sum of the basic operations.
 
-4 - Code is like a poem; it's not just something we write to reach some
-    practical result. Sometimes people that are far from the Redis philosophy
-    suggest using other code written by other authors (frequently in other
-    languages) in order to implement something Redis currently lacks. But to us
-    this is like if Shakespeare decided to end Enrico IV using the Paradiso from
-    the Divina Commedia. Is using any external code a bad idea? Not at all. Like
-    in "One Thousand and One Nights" smaller self contained stories are embedded
-    in a bigger story, we'll be happy to use beautiful self contained libraries
-    when needed. At the same time, when writing the Redis story we're trying to
-    write smaller stories that will fit in to other code.
+4 - Code is like a poem; it's not just something we write to reach some practical result.  Sometimes people that are far from the Redis philosophy suggest using other  code written by other authors (frequently in other languages) in order to implement something Redis currently lacks. But to us this is like if Shakespeare decided to end Enrico IV using the Paradiso from the Divina Commedia. Is using any external code a bad idea? Not at all. Like in "One Thousand and One Nights" smaller self contained stories are embedded in a bigger story, we'll be happy to use beautiful self contained libraries when needed. At the same time, when writing the Redis story we're trying to write smaller stories that will fit in to other code.
 
-5 - We're against complexity. We believe designing systems is a fight against
-    complexity. We'll accept to fight the complexity when it's worthwhile but
-    we'll try hard to recognize when a small feature is not worth 1000s of lines
-    of code. Most of the time the best way to fight complexity is by not
-    creating it at all.
+5 - We're against complexity. We believe designing systems is a fight against complexity. We'll accept to fight the complexity when it's worthwhile but we'll try hard to recognize when a small feature is not worth 1000s of lines of code. Most of the time the best way to fight complexity is by not creating it at all.
 
-6 - Two levels of API. The Redis API has two levels: 1) a subset of the API fits
-    naturally into a distributed version of Redis and 2) a more complex API that
-    supports multi-key operations. Both are useful if used judiciously but
-    there's no way to make the more complex multi-keys API distributed in an
-    opaque way without violating our other principles. We don't want to provide
-    the illusion of something that will work magically when actually it can't in
-    all cases. Instead we'll provide commands to quickly migrate keys from one
-    instance to another to perform multi-key operations and expose the tradeoffs
-    to the user.
+6 - Two levels of API. The Redis API has two levels: 1) a subset of the API fits naturally into a distributed version of Redis and 2) a more complex API that supports multi-key operations. Both are useful if used judiciously but there's no way to make the more complex multi-keys API distributed in an opaque way without violating our other principles. We don't want to provide the illusion of something that will work magically when actually it can't in all cases. Instead we'll provide commands to quickly migrate keys from one instance to another to perform multi-key operations and expose the tradeoffs to the user.
+
+7 - We optimize for joy. We believe writing code is a lot of hard work, and the only way it can be worth is by enjoying it.  When there is no longer joy in writing code, the best thing to do is stop. To prevent this, we'll avoid taking paths that will make Redis less of a joy to develop.
 
-7 - We optimize for joy. We believe writing code is a lot of hard work, and the
-    only way it can be worth is by enjoying it. When there is no longer joy in
-    writing code, the best thing to do is stop. To prevent this, we'll avoid
-    taking paths that will make Redis less of a joy to develop.

README

@@ -0,0 +1,143 @@
+Where to find complete Redis documentation?
+-------------------------------------------
+
+This README is just a fast "quick start" document. You can find more detailed
+documentation at http://redis.io
+
+Building Redis
+--------------
+
+Redis can be compiled and used on Linux, OSX, OpenBSD, NetBSD, FreeBSD.
+We support big endian and little endian architectures.
+
+It may compile on Solaris derived systems (for instance SmartOS) but our
+support for this platform is "best effort" and Redis is not guaranteed to
+work as well as in Linux, OSX, and *BSD there.
+
+It is as simple as:
+
+    % make
+
+You can run a 32 bit Redis binary using:
+
+    % make 32bit
+
+After building Redis is a good idea to test it, using:
+
+    % make test
+
+NOTE: if after building Redis with a 32 bit target you need to rebuild it
+      with a 64 bit target you need to perform a "make clean" in the root
+      directory of the Redis distribution.
+
+Allocator
+---------
+
+Selecting a non-default memory allocator when building Redis is done by setting
+the `MALLOC` environment variable. Redis is compiled and linked against libc
+malloc by default, with the exception of jemalloc being the default on Linux
+systems. This default was picked because jemalloc has proven to have fewer
+fragmentation problems than libc malloc.
+
+To force compiling against libc malloc, use:
+
+    % make MALLOC=libc
+
+To compile against jemalloc on Mac OS X systems, use:
+
+    % make MALLOC=jemalloc
+
+Verbose build
+-------------
+
+Redis will build with a user friendly colorized output by default.
+If you want to see a more verbose output use the following:
+
+    % make V=1
+
+Running Redis
+-------------
+
+To run Redis with the default configuration just type:
+
+    % cd src
+    % ./redis-server
+    
+If you want to provide your redis.conf, you have to run it using an additional
+parameter (the path of the configuration file):
+
+    % cd src
+    % ./redis-server /path/to/redis.conf
+
+It is possible to alter the Redis configuration passing parameters directly
+as options using the command line. Examples:
+
+    % ./redis-server --port 9999 --slaveof 127.0.0.1 6379
+    % ./redis-server /etc/redis/6379.conf --loglevel debug
+
+All the options in redis.conf are also supported as options using the command
+line, with exactly the same name.
+
+Playing with Redis
+------------------
+
+You can use redis-cli to play with Redis. Start a redis-server instance,
+then in another terminal try the following:
+
+    % cd src
+    % ./redis-cli
+    redis> ping
+    PONG
+    redis> set foo bar
+    OK
+    redis> get foo
+    "bar"
+    redis> incr mycounter
+    (integer) 1
+    redis> incr mycounter
+    (integer) 2
+    redis> 
+
+You can find the list of all the available commands here:
+
+    http://redis.io/commands
+
+Installing Redis
+-----------------
+
+In order to install Redis binaries into /usr/local/bin just use:
+
+    % make install
+
+You can use "make PREFIX=/some/other/directory install" if you wish to use a
+different destination.
+
+Make install will just install binaries in your system, but will not configure
+init scripts and configuration files in the appropriate place. This is not
+needed if you want just to play a bit with Redis, but if you are installing
+it the proper way for a production system, we have a script doing this
+for Ubuntu and Debian systems:
+
+    % cd utils
+    % ./install_server
+
+The script will ask you a few questions and will setup everything you need
+to run Redis properly as a background daemon that will start again on
+system reboots.
+
+You'll be able to stop and start Redis using the script named
+/etc/init.d/redis_<portnumber>, for instance /etc/init.d/redis_6379.
+
+Code contributions
+---
+
+Note: by contributing code to the Redis project in any form, including sending
+a pull request via Github, a code fragment or patch via private email or
+public discussion groups, you agree to release your code under the terms
+of the BSD license that you can find in the COPYING file included in the Redis
+source distribution.
+
+Please see the CONTRIBUTING file in this source distribution for more
+information.
+
+Enjoy!

README.md

@@ -1,446 +0,0 @@
-This README is just a fast *quick start* document. You can find more detailed documentation at [redis.io](https://redis.io).
-
-What is Redis?
---------------
-
-Redis is often referred as a *data structures* server. What this means is that Redis provides access to mutable data structures via a set of commands, which are sent using a *server-client* model with TCP sockets and a simple protocol. So different processes can query and modify the same data structures in a shared way.
-
-Data structures implemented into Redis have a few special properties:
-
-* Redis cares to store them on disk, even if they are always served and modified into the server memory. This means that Redis is fast, but that is also non-volatile.
-* Implementation of data structures stress on memory efficiency, so data structures inside Redis will likely use less memory compared to the same data structure modeled using an high level programming language.
-* Redis offers a number of features that are natural to find in a database, like replication, tunable levels of durability, cluster, high availability.
-
-Another good example is to think of Redis as a more complex version of memcached, where the operations are not just SETs and GETs, but operations to work with complex data types like Lists, Sets, ordered data structures, and so forth.
-
-If you want to know more, this is a list of selected starting points:
-
-* Introduction to Redis data types. http://redis.io/topics/data-types-intro
-* Try Redis directly inside your browser. http://try.redis.io
-* The full list of Redis commands. http://redis.io/commands
-* There is much more inside the Redis official documentation. http://redis.io/documentation
-
-Building Redis
---------------
-
-Redis can be compiled and used on Linux, OSX, OpenBSD, NetBSD, FreeBSD.
-We support big endian and little endian architectures, and both 32 bit
-and 64 bit systems.
-
-It may compile on Solaris derived systems (for instance SmartOS) but our
-support for this platform is *best effort* and Redis is not guaranteed to
-work as well as in Linux, OSX, and \*BSD there.
-
-It is as simple as:
-
-    % make
-
-You can run a 32 bit Redis binary using:
-
-    % make 32bit
-
-After building Redis, it is a good idea to test it using:
-
-    % make test
-
-Fixing build problems with dependencies or cached build options
----------
-
-Redis has some dependencies which are included into the `deps` directory.
-`make` does not automatically rebuild dependencies even if something in
-the source code of dependencies changes.
-
-When you update the source code with `git pull` or when code inside the
-dependencies tree is modified in any other way, make sure to use the following
-command in order to really clean everything and rebuild from scratch:
-
-    make distclean
-
-This will clean: jemalloc, lua, hiredis, linenoise.
-
-Also if you force certain build options like 32bit target, no C compiler
-optimizations (for debugging purposes), and other similar build time options,
-those options are cached indefinitely until you issue a `make distclean`
-command.
-
-Fixing problems building 32 bit binaries
----------
-
-If after building Redis with a 32 bit target you need to rebuild it
-with a 64 bit target, or the other way around, you need to perform a
-`make distclean` in the root directory of the Redis distribution.
-
-In case of build errors when trying to build a 32 bit binary of Redis, try
-the following steps:
-
-* Install the packages libc6-dev-i386 (also try g++-multilib).
-* Try using the following command line instead of `make 32bit`:
-  `make CFLAGS="-m32 -march=native" LDFLAGS="-m32"`
-
-Allocator
----------
-
-Selecting a non-default memory allocator when building Redis is done by setting
-the `MALLOC` environment variable. Redis is compiled and linked against libc
-malloc by default, with the exception of jemalloc being the default on Linux
-systems. This default was picked because jemalloc has proven to have fewer
-fragmentation problems than libc malloc.
-
-To force compiling against libc malloc, use:
-
-    % make MALLOC=libc
-
-To compile against jemalloc on Mac OS X systems, use:
-
-    % make MALLOC=jemalloc
-
-Verbose build
--------------
-
-Redis will build with a user friendly colorized output by default.
-If you want to see a more verbose output use the following:
-
-    % make V=1
-
-Running Redis
--------------
-
-To run Redis with the default configuration just type:
-
-    % cd src
-    % ./redis-server
-
-If you want to provide your redis.conf, you have to run it using an additional
-parameter (the path of the configuration file):
-
-    % cd src
-    % ./redis-server /path/to/redis.conf
-
-It is possible to alter the Redis configuration by passing parameters directly
-as options using the command line. Examples:
-
-    % ./redis-server --port 9999 --slaveof 127.0.0.1 6379
-    % ./redis-server /etc/redis/6379.conf --loglevel debug
-
-All the options in redis.conf are also supported as options using the command
-line, with exactly the same name.
-
-Playing with Redis
-------------------
-
-You can use redis-cli to play with Redis. Start a redis-server instance,
-then in another terminal try the following:
-
-    % cd src
-    % ./redis-cli
-    redis> ping
-    PONG
-    redis> set foo bar
-    OK
-    redis> get foo
-    "bar"
-    redis> incr mycounter
-    (integer) 1
-    redis> incr mycounter
-    (integer) 2
-    redis>
-
-You can find the list of all the available commands at http://redis.io/commands.
-
-Installing Redis
------------------
-
-In order to install Redis binaries into /usr/local/bin just use:
-
-    % make install
-
-You can use `make PREFIX=/some/other/directory install` if you wish to use a
-different destination.
-
-Make install will just install binaries in your system, but will not configure
-init scripts and configuration files in the appropriate place. This is not
-needed if you want just to play a bit with Redis, but if you are installing
-it the proper way for a production system, we have a script doing this
-for Ubuntu and Debian systems:
-
-    % cd utils
-    % ./install_server.sh
-
-The script will ask you a few questions and will setup everything you need
-to run Redis properly as a background daemon that will start again on
-system reboots.
-
-You'll be able to stop and start Redis using the script named
-`/etc/init.d/redis_<portnumber>`, for instance `/etc/init.d/redis_6379`.
-
-Code contributions
------------------
-
-Note: by contributing code to the Redis project in any form, including sending
-a pull request via Github, a code fragment or patch via private email or
-public discussion groups, you agree to release your code under the terms
-of the BSD license that you can find in the [COPYING][1] file included in the Redis
-source distribution.
-
-Please see the [CONTRIBUTING][2] file in this source distribution for more
-information.
-
-[1]: https://github.com/antirez/redis/blob/unstable/COPYING
-[2]: https://github.com/antirez/redis/blob/unstable/CONTRIBUTING
-
-Redis internals
-===
-
-If you are reading this README you are likely in front of a Github page
-or you just untarred the Redis distribution tar ball. In both the cases
-you are basically one step away from the source code, so here we explain
-the Redis source code layout, what is in each file as a general idea, the
-most important functions and structures inside the Redis server and so forth.
-We keep all the discussion at a high level without digging into the details
-since this document would be huge otherwise and our code base changes
-continuously, but a general idea should be a good starting point to
-understand more. Moreover most of the code is heavily commented and easy
-to follow.
-
-Source code layout
----
-
-The Redis root directory just contains this README, the Makefile which
-calls the real Makefile inside the `src` directory and an example
-configuration for Redis and Sentinel. You can find a few shell
-scripts that are used in order to execute the Redis, Redis Cluster and
-Redis Sentinel unit tests, which are implemented inside the `tests`
-directory.
-
-Inside the root are the following important directories:
-
-* `src`: contains the Redis implementation, written in C.
-* `tests`: contains the unit tests, implemented in Tcl.
-* `deps`: contains libraries Redis uses. Everything needed to compile Redis is inside this directory; your system just needs to provide `libc`, a POSIX compatible interface and a C compiler. Notably `deps` contains a copy of `jemalloc`, which is the default allocator of Redis under Linux. Note that under `deps` there are also things which started with the Redis project, but for which the main repository is not `anitrez/redis`. An exception to this rule is `deps/geohash-int` which is the low level geocoding library used by Redis: it originated from a different project, but at this point it diverged so much that it is developed as a separated entity directly inside the Redis repository.
-
-There are a few more directories but they are not very important for our goals
-here. We'll focus mostly on `src`, where the Redis implementation is contained,
-exploring what there is inside each file. The order in which files are
-exposed is the logical one to follow in order to disclose different layers
-of complexity incrementally.
-
-Note: lately Redis was refactored quite a bit. Function names and file
-names have been changed, so you may find that this documentation reflects the
-`unstable` branch more closely. For instance in Redis 3.0 the `server.c`
-and `server.h` files were named to `redis.c` and `redis.h`. However the overall
-structure is the same. Keep in mind that all the new developments and pull
-requests should be performed against the `unstable` branch.
-
-server.h
----
-
-The simplest way to understand how a program works is to understand the
-data structures it uses. So we'll start from the main header file of
-Redis, which is `server.h`.
-
-All the server configuration and in general all the shared state is
-defined in a global structure called `server`, of type `struct redisServer`.
-A few important fields in this structure are:
-
-* `server.db` is an array of Redis databases, where data is stored.
-* `server.commands` is the command table.
-* `server.clients` is a linked list of clients connected to the server.
-* `server.master` is a special client, the master, if the instance is a slave.
-
-There are tons of other fields. Most fields are commented directly inside
-the structure definition.
-
-Another important Redis data structure is the one defining a client.
-In the past it was called `redisClient`, now just `client`. The structure
-has many fields, here we'll just show the main ones:
-
-    struct client {
-        int fd;
-        sds querybuf;
-        int argc;
-        robj **argv;
-        redisDb *db;
-        int flags;
-        list *reply;
-        char buf[PROTO_REPLY_CHUNK_BYTES];
-        ... many other fields ...
-    }
-
-The client structure defines a *connected client*:
-
-* The `fd` field is the client socket file descriptor.
-* `argc` and `argv` are populated with the command the client is executing, so that functions implementing a given Redis command can read the arguments.
-* `querybuf` accumulates the requests from the client, which are parsed by the Redis server according to the Redis protocol and executed by calling the implementations of the commands the client is executing.
-* `reply` and `buf` are dynamic and static buffers that accumulate the replies the server sends to the client. These buffers are incrementally written to the socket as soon as the file descriptor is writable.
-
-As you can see in the client structure above, arguments in a command
-are described as `robj` structures. The following is the full `robj`
-structure, which defines a *Redis object*:
-
-    typedef struct redisObject {
-        unsigned type:4;
-        unsigned encoding:4;
-        unsigned lru:LRU_BITS; /* lru time (relative to server.lruclock) */
-        int refcount;
-        void *ptr;
-    } robj;
-
-Basically this structure can represent all the basic Redis data types like
-strings, lists, sets, sorted sets and so forth. The interesting thing is that
-it has a `type` field, so that it is possible to know what type a given
-object has, and a `refcount`, so that the same object can be referenced
-in multiple places without allocating it multiple times. Finally the `ptr`
-field points to the actual representation of the object, which might vary
-even for the same type, depending on the `encoding` used.
-
-Redis objects are used extensively in the Redis internals, however in order
-to avoid the overhead of indirect accesses, recently in many places
-we just use plain dynamic strings not wrapped inside a Redis object.
-
-server.c
----
-
-This is the entry point of the Redis server, where the `main()` function
-is defined. The following are the most important steps in order to startup
-the Redis server.
-
-* `initServerConfig()` setups the default values of the `server` structure.
-* `initServer()` allocates the data structures needed to operate, setup the listening socket, and so forth.
-* `aeMain()` starts the event loop which listens for new connections.
-
-There are two special functions called periodically by the event loop:
-
-1. `serverCron()` is called periodically (according to `server.hz` frequency), and performs tasks that must be performed from time to time, like checking for timedout clients.
-2. `beforeSleep()` is called every time the event loop fired, Redis served a few requests, and is returning back into the event loop.
-
-Inside server.c you can find code that handles other vital things of the Redis server:
-
-* `call()` is used in order to call a given command in the context of a given client.
-* `activeExpireCycle()` handles eviciton of keys with a time to live set via the `EXPIRE` command.
-* `freeMemoryIfNeeded()` is called when a new write command should be performed but Redis is out of memory according to the `maxmemory` directive.
-* The global variable `redisCommandTable` defines all the Redis commands, specifying the name of the command, the function implementing the command, the number of arguments required, and other properties of each command.
-
-networking.c
----
-
-This file defines all the I/O functions with clients, masters and slaves
-(which in Redis are just special clients):
-
-* `createClient()` allocates and initializes a new client.
-* the `addReply*()` family of functions are used by commands implementations in order to append data to the client structure, that will be transmitted to the client as a reply for a given command executed.
-* `writeToClient()` transmits the data pending in the output buffers to the client and is called by the *writable event handler* `sendReplyToClient()`.
-* `readQueryFromClient()` is the *readable event handler* and accumulates data from read from the client into the query buffer.
-* `processInputBuffer()` is the entry point in order to parse the client query buffer according to the Redis protocol. Once commands are ready to be processed, it calls `processCommand()` which is defined inside `server.c` in order to actually execute the command.
-* `freeClient()` deallocates, disconnects and removes a client.
-
-aof.c and rdb.c
----
-
-As you can guess from the names these files implement the RDB and AOF
-persistence for Redis. Redis uses a persistence model based on the `fork()`
-system call in order to create a thread with the same (shared) memory
-content of the main Redis thread. This secondary thread dumps the content
-of the memory on disk. This is used by `rdb.c` to create the snapshots
-on disk and by `aof.c` in order to perform the AOF rewrite when the
-append only file gets too big.
-
-The implementation inside `aof.c` has additional functions in order to
-implement an API that allows commands to append new commands into the AOF
-file as clients execute them.
-
-The `call()` function defined inside `server.c` is responsible to call
-the functions that in turn will write the commands into the AOF.
-
-db.c
----
-
-Certain Redis commands operate on specific data types, others are general.
-Examples of generic commands are `DEL` and `EXPIRE`. They operate on keys
-and not on their values specifically. All those generic commands are
-defined inside `db.c`.
-
-Moreover `db.c` implements an API in order to perform certain operations
-on the Redis dataset without directly accessing the internal data structures.
-
-The most important functions inside `db.c` which are used in many commands
-implementations are the following:
-
-* `lookupKeyRead()` and `lookupKeyWrite()` are used in order to get a pointer to the value associated to a given key, or `NULL` if the key does not exist.
-* `dbAdd()` and its higher level counterpart `setKey()` create a new key in a Redis database.
-* `dbDelete()` removes a key and its associated value.
-* `emptyDb()` removes an entire single database or all the databases defined.
-
-The rest of the file implements the generic commands exposed to the client.
-
-object.c
----
-
-The `robj` structure defining Redis objects was already described. Inside
-`object.c` there are all the functions that operate with Redis objects at
-a basic level, like functions to allocate new objects, handle the reference
-counting and so forth. Notable functions inside this file:
-
-* `incrRefcount()` and `decrRefCount()` are used in order to increment or decrement an object reference count. When it drops to 0 the object is finally freed.
-* `createObject()` allocates a new object. There are also specialized functions to allocate string objects having a specific content, like `createStringObjectFromLongLong()` and similar functions.
-
-This file also implements the `OBJECT` command.
-
-replication.c
----
-
-This is one of the most complex files inside Redis, it is recommended to
-approach it only after getting a bit familiar with the rest of the code base.
-In this file there is the implementation of both the master and slave role
-of Redis.
-
-One of the most important functions inside this file is `replicationFeedSlaves()` that writes commands to the clients representing slave instances connected
-to our master, so that the slaves can get the writes performed by the clients:
-this way their data set will remain synchronized with the one in the master.
-
-This file also implements both the `SYNC` and `PSYNC` commands that are
-used in order to perform the first synchronization between masters and
-slaves, or to continue the replication after a disconnection.
-
-Other C files
----
-
-* `t_hash.c`, `t_list.c`, `t_set.c`, `t_string.c` and `t_zset.c` contains the implementation of the Redis data types. They implement both an API to access a given data type, and the client commands implementations for these data types.
-* `ae.c` implements the Redis event loop, it's a self contained library which is simple to read and understand.
-* `sds.c` is the Redis string library, check http://github.com/antirez/sds for more information.
-* `anet.c` is a library to use POSIX networking in a simpler way compared to the raw interface exposed by the kernel.
-* `dict.c` is an implementation of a non-blocking hash table which rehashes incrementally.
-* `scripting.c` implements Lua scripting. It is completely self contained from the rest of the Redis implementation and is simple enough to understand if you are familar with the Lua API.
-* `cluster.c` implements the Redis Cluster. Probably a good read only after being very familiar with the rest of the Redis code base. If you want to read `cluster.c` make sure to read the [Redis Cluster specification][3].
-
-[3]: http://redis.io/topics/cluster-spec
-
-Anatomy of a Redis command
----
-
-All the Redis commands are defined in the following way:
-
-    void foobarCommand(client *c) {
-        printf("%s",c->argv[1]->ptr); /* Do something with the argument. */
-        addReply(c,shared.ok); /* Reply something to the client. */
-    }
-
-The command is then referenced inside `server.c` in the command table:
-
-    {"foobar",foobarCommand,2,"rtF",0,NULL,0,0,0,0,0},
-
-In the above example `2` is the number of arguments the command takes,
-while `"rtF"` are the command flags, as documented in the command table
-top comment inside `server.c`.
-
-After the command operates in some way, it returns a reply to the client,
-usually using `addReply()` or a similar function defined inside `networking.c`.
-
-There are tons of commands implementations inside the Redis source code
-that can serve as examples of actual commands implementations. To write
-a few toy commands can be a good exercise to familiarize with the code base.
-
-There are also many other files not described here, but it is useless to
-cover everything. We want to just help you with the first steps.
-Eventually you'll find your way inside the Redis code base :-)
-
-Enjoy!

deps/Makefile

@@ -54,21 +54,16 @@ linenoise: .make-prerequisites
 .PHONY: linenoise
 
 ifeq ($(uname_S),SunOS)
-	# Make isinf() available
-	LUA_CFLAGS= -D__C99FEATURES__=1
+  # Make isinf() available
+  LUA_CFLAGS= -D__C99FEATURES__=1
 endif
 
-LUA_CFLAGS+= -O2 -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' $(CFLAGS)
+LUA_CFLAGS+= -O2 -Wall -DLUA_ANSI $(CFLAGS)
 LUA_LDFLAGS+= $(LDFLAGS)
-# lua's Makefile defines AR="ar rcu", which is unusual, and makes it more
-# challenging to cross-compile lua (and redis).  These defines make it easier
-# to fit redis into cross-compilation environments, which typically set AR.
-AR=ar
-ARFLAGS=rcu
 
 lua: .make-prerequisites
 	@printf '%b %b\n' $(MAKECOLOR)MAKE$(ENDCOLOR) $(BINCOLOR)$@$(ENDCOLOR)
-	cd lua/src && $(MAKE) all CFLAGS="$(LUA_CFLAGS)" MYLDFLAGS="$(LUA_LDFLAGS)" AR="$(AR) $(ARFLAGS)"
+	cd lua/src && $(MAKE) all CFLAGS="$(LUA_CFLAGS)" MYLDFLAGS="$(LUA_LDFLAGS)"
 
 .PHONY: lua
 
@@ -77,7 +72,7 @@ JEMALLOC_LDFLAGS= $(LDFLAGS)
 
 jemalloc: .make-prerequisites
 	@printf '%b %b\n' $(MAKECOLOR)MAKE$(ENDCOLOR) $(BINCOLOR)$@$(ENDCOLOR)
-	cd jemalloc && ./configure --with-version=5.1.0-0-g0 --with-lg-quantum=3 --with-jemalloc-prefix=je_ --enable-cc-silence CFLAGS="$(JEMALLOC_CFLAGS)" LDFLAGS="$(JEMALLOC_LDFLAGS)"
+	cd jemalloc && ./configure --with-jemalloc-prefix=je_ --enable-cc-silence CFLAGS="$(JEMALLOC_CFLAGS)" LDFLAGS="$(JEMALLOC_LDFLAGS)"
 	cd jemalloc && $(MAKE) CFLAGS="$(JEMALLOC_CFLAGS)" LDFLAGS="$(JEMALLOC_LDFLAGS)" lib/libjemalloc.a
 
 .PHONY: jemalloc

deps/README.md

@@ -1,88 +0,0 @@
-This directory contains all Redis dependencies, except for the libc that
-should be provided by the operating system.
-
-* **Jemalloc** is our memory allocator, used as replacement for libc malloc on Linux by default. It has good performances and excellent fragmentation behavior. This component is upgraded from time to time.
-* **geohash-int** is inside the dependencies directory but is actually part of the Redis project, since it is our private fork (heavily modified) of a library initially developed for Ardb, which is in turn a fork of Redis.
-* **hiredis** is the official C client library for Redis. It is used by redis-cli, redis-benchmark and Redis Sentinel. It is part of the Redis official ecosystem but is developed externally from the Redis repository, so we just upgrade it as needed.
-* **linenoise** is a readline replacement. It is developed by the same authors of Redis but is managed as a separated project and updated as needed.
-* **lua** is Lua 5.1 with minor changes for security and additional libraries.
-
-How to upgrade the above dependencies
-===
-
-Jemalloc
----
-
-Jemalloc is modified with changes that allow us to implement the Redis
-active defragmentation logic. However this feature of Redis is not mandatory
-and Redis is able to understand if the Jemalloc version it is compiled
-against supports such Redis-specific modifications. So in theory, if you
-are not interested in the active defragmentation, you can replace Jemalloc
-just following tose steps:
-
-1. Remove the jemalloc directory.
-2. Substitute it with the new jemalloc source tree.
-3. Edit the Makefile localted in the same directory as the README you are
-   reading, and change the --with-version in the Jemalloc configure script
-   options with the version you are using. This is required because otherwise
-   Jemalloc configuration script is broken and will not work nested in another
-   git repository.
-
-However note that we change Jemalloc settings via the `configure` script of Jemalloc using the `--with-lg-quantum` option, setting it to the value of 3 instead of 4. This provides us with more size classes that better suit the Redis data structures, in order to gain memory efficiency.
-
-If you want to upgrade Jemalloc while also providing support for
-active defragmentation, in addition to the above steps you need to perform
-the following additional steps:
-
-5. In Jemalloc three, file `include/jemalloc/jemalloc_macros.h.in`, make sure
-   to add `#define JEMALLOC_FRAG_HINT`.
-6. Implement the function `je_get_defrag_hint()` inside `src/jemalloc.c`. You
-   can see how it is implemented in the current Jemalloc source tree shipped
-   with Redis, and rewrite it according to the new Jemalloc internals, if they
-   changed, otherwise you could just copy the old implementation if you are
-   upgrading just to a similar version of Jemalloc.
-
-Geohash
----
-
-This is never upgraded since it's part of the Redis project. If there are changes to merge from Ardb there is the need to manually check differences, but at this point the source code is pretty different.
-
-Hiredis
----
-
-Hiredis uses the SDS string library, that must be the same version used inside Redis itself. Hiredis is also very critical for Sentinel. Historically Redis often used forked versions of hiredis in a way or the other. In order to upgrade it is advised to take a lot of care:
-
-1. Check with diff if hiredis API changed and what impact it could have in Redis.
-2. Make sure thet the SDS library inside Hiredis and inside Redis are compatible.
-3. After the upgrade, run the Redis Sentinel test.
-4. Check manually that redis-cli and redis-benchmark behave as expecteed, since we have no tests for CLI utilities currently.
-
-Linenoise
----
-
-Linenoise is rarely upgraded as needed. The upgrade process is trivial since
-Redis uses a non modified version of linenoise, so to upgrade just do the
-following:
-
-1. Remove the linenoise directory.
-2. Substitute it with the new linenoise source tree.
-
-Lua
----
-
-We use Lua 5.1 and no upgrade is planned currently, since we don't want to break
-Lua scripts for new Lua features: in the context of Redis Lua scripts the
-capabilities of 5.1 are usually more than enough, the release is rock solid,
-and we definitely don't want to break old scripts.
-
-So upgrading of Lua is up to the Redis project maintainers and should be a
-manual procedure performed by taking a diff between the different versions.
-
-Currently we have at least the following differences between official Lua 5.1
-and our version:
-
-1. Makefile is modified to allow a different compiler than GCC.
-2. We have the implementation source code, and directly link to the following external libraries: `lua_cjson.o`, `lua_struct.o`, `lua_cmsgpack.o` and `lua_bit.o`.
-3. There is a security fix in `ldo.c`, line 498: The check for `LUA_SIGNATURE[0]` is removed in order toa void direct bytecode execution.
-
-

deps/hiredis/.gitignore

@@ -1,7 +1,6 @@
 /hiredis-test
-/examples/hiredis-example*
+/hiredis-example*
 /*.o
 /*.so
 /*.dylib
 /*.a
-/*.pc

deps/hiredis/.travis.yml

@@ -1,39 +0,0 @@
-language: c
-sudo: false
-compiler:
-  - gcc
-  - clang
-
-os:
-  - linux
-  - osx
-
-before_script:
-    - if [ "$TRAVIS_OS_NAME" == "osx" ] ; then brew update; brew install redis; fi
-
-addons:
-  apt:
-    packages:
-    - libc6-dbg
-    - libc6-dev
-    - libc6:i386
-    - libc6-dev-i386
-    - libc6-dbg:i386
-    - gcc-multilib
-    - valgrind
-
-env:
-    - CFLAGS="-Werror"
-    - PRE="valgrind --track-origins=yes --leak-check=full"
-    - TARGET="32bit" TARGET_VARS="32bit-vars" CFLAGS="-Werror"
-    - TARGET="32bit" TARGET_VARS="32bit-vars" PRE="valgrind --track-origins=yes --leak-check=full"
-
-matrix:
-  exclude:
-    - os: osx
-      env: PRE="valgrind --track-origins=yes --leak-check=full"
-
-    - os: osx
-      env: TARGET="32bit" TARGET_VARS="32bit-vars" PRE="valgrind --track-origins=yes --leak-check=full"
-
-script: make $TARGET CFLAGS="$CFLAGS" && make check PRE="$PRE" && make $TARGET_VARS hiredis-example

deps/hiredis/CHANGELOG.md

@@ -1,136 +1,3 @@
-### 1.0.0 (unreleased)
-
-**Fixes**:
-
-* Catch a buffer overflow when formatting the error message
-* Import latest upstream sds. This breaks applications that are linked against the old hiredis v0.13
-* Fix warnings, when compiled with -Wshadow
-* Make hiredis compile in Cygwin on Windows, now CI-tested
-
-**BREAKING CHANGES**:
-
-* Change `redisReply.len` to `size_t`, as it denotes the the size of a string
-
-User code should compare this to `size_t` values as well.
-If it was used to compare to other values, casting might be necessary or can be removed, if casting was applied before.
-
-* Remove backwards compatibility macro's
-
-This removes the following old function aliases, use the new name now:
-
-| Old                         | New                    |
-| --------------------------- | ---------------------- |
-| redisReplyReaderCreate      | redisReaderCreate      |
-| redisReplyReaderCreate      | redisReaderCreate      |
-| redisReplyReaderFree        | redisReaderFree        |
-| redisReplyReaderFeed        | redisReaderFeed        |
-| redisReplyReaderGetReply    | redisReaderGetReply    |
-| redisReplyReaderSetPrivdata | redisReaderSetPrivdata |
-| redisReplyReaderGetObject   | redisReaderGetObject   |
-| redisReplyReaderGetError    | redisReaderGetError    |
-
-* The `DEBUG` variable in the Makefile was renamed to `DEBUG_FLAGS`
-
-Previously it broke some builds for people that had `DEBUG` set to some arbitrary value,
-due to debugging other software.
-By renaming we avoid unintentional name clashes.
-
-Simply rename `DEBUG` to `DEBUG_FLAGS` in your environment to make it working again.
-
-### 0.13.3 (2015-09-16)
-
-* Revert "Clear `REDIS_CONNECTED` flag when connection is closed".
-* Make tests pass on FreeBSD (Thanks, Giacomo Olgeni)
-
-
-If the `REDIS_CONNECTED` flag is cleared,
-the async onDisconnect callback function will never be called.
-This causes problems as the disconnect is never reported back to the user.
-
-### 0.13.2 (2015-08-25)
-
-* Prevent crash on pending replies in async code (Thanks, @switch-st)
-* Clear `REDIS_CONNECTED` flag when connection is closed (Thanks, Jerry Jacobs)
-* Add MacOS X addapter (Thanks, @dizzus)
-* Add Qt adapter (Thanks, Pietro Cerutti)
-* Add Ivykis adapter (Thanks, Gergely Nagy)
-
-All adapters are provided as is and are only tested where possible.
-
-### 0.13.1 (2015-05-03)
-
-This is a bug fix release.
-The new `reconnect` method introduced new struct members, which clashed with pre-defined names in pre-C99 code.
-Another commit forced C99 compilation just to make it work, but of course this is not desirable for outside projects.
-Other non-C99 code can now use hiredis as usual again.
-Sorry for the inconvenience.
-
-* Fix memory leak in async reply handling (Salvatore Sanfilippo)
-* Rename struct member to avoid name clash with pre-c99 code (Alex Balashov, ncopa)
-
-### 0.13.0 (2015-04-16)
-
-This release adds a minimal Windows compatibility layer.
-The parser, standalone since v0.12.0, can now be compiled on Windows
-(and thus used in other client libraries as well)
-
-* Windows compatibility layer for parser code (tzickel)
-* Properly escape data printed to PKGCONF file (Dan Skorupski)
-* Fix tests when assert() undefined (Keith Bennett, Matt Stancliff)
-* Implement a reconnect method for the client context, this changes the structure of `redisContext` (Aaron Bedra)
-
-### 0.12.1 (2015-01-26)
-
-* Fix `make install`: DESTDIR support, install all required files, install PKGCONF in proper location
-* Fix `make test` as 32 bit build on 64 bit platform
-
-### 0.12.0 (2015-01-22)
-
-* Add optional KeepAlive support
-
-* Try again on EINTR errors
-
-* Add libuv adapter
-
-* Add IPv6 support
-
-* Remove possiblity of multiple close on same fd
-
-* Add ability to bind source address on connect
-
-* Add redisConnectFd() and redisFreeKeepFd()
-
-* Fix getaddrinfo() memory leak
-
-* Free string if it is unused (fixes memory leak)
-
-* Improve redisAppendCommandArgv performance 2.5x
-
-* Add support for SO_REUSEADDR
-
-* Fix redisvFormatCommand format parsing
-
-* Add GLib 2.0 adapter
-
-* Refactor reading code into read.c
-
-* Fix errno error buffers to not clobber errors
-
-* Generate pkgconf during build
-
-* Silence _BSD_SOURCE warnings
-
-* Improve digit counting for multibulk creation
-
-
-### 0.11.0
-
-* Increase the maximum multi-bulk reply depth to 7.
-
-* Increase the read buffer size from 2k to 16k.
-
-* Use poll(2) instead of select(2) to support large fds (>= 1024).
-
 ### 0.10.1
 
 * Makefile overhaul. Important to check out if you override one or more

deps/hiredis/Makefile

@@ -3,50 +3,24 @@
 # Copyright (C) 2010-2011 Pieter Noordhuis <pcnoordhuis at gmail dot com>
 # This file is released under the BSD license, see the COPYING file
 
-OBJ=net.o hiredis.o sds.o async.o read.o
-EXAMPLES=hiredis-example hiredis-example-libevent hiredis-example-libev hiredis-example-glib
-TESTS=hiredis-test
+OBJ=net.o hiredis.o sds.o async.o
+BINS=hiredis-example hiredis-test
 LIBNAME=libhiredis
-PKGCONFNAME=hiredis.pc
 
-HIREDIS_MAJOR=$(shell grep HIREDIS_MAJOR hiredis.h | awk '{print $$3}')
-HIREDIS_MINOR=$(shell grep HIREDIS_MINOR hiredis.h | awk '{print $$3}')
-HIREDIS_PATCH=$(shell grep HIREDIS_PATCH hiredis.h | awk '{print $$3}')
-HIREDIS_SONAME=$(shell grep HIREDIS_SONAME hiredis.h | awk '{print $$3}')
-
-# Installation related variables and target
-PREFIX?=/usr/local
-INCLUDE_PATH?=include/hiredis
-LIBRARY_PATH?=lib
-PKGCONF_PATH?=pkgconfig
-INSTALL_INCLUDE_PATH= $(DESTDIR)$(PREFIX)/$(INCLUDE_PATH)
-INSTALL_LIBRARY_PATH= $(DESTDIR)$(PREFIX)/$(LIBRARY_PATH)
-INSTALL_PKGCONF_PATH= $(INSTALL_LIBRARY_PATH)/$(PKGCONF_PATH)
-
-# redis-server configuration used for testing
-REDIS_PORT=56379
-REDIS_SERVER=redis-server
-define REDIS_TEST_CONFIG
-	daemonize yes
-	pidfile /tmp/hiredis-test-redis.pid
-	port $(REDIS_PORT)
-	bind 127.0.0.1
-	unixsocket /tmp/hiredis-test-redis.sock
-endef
-export REDIS_TEST_CONFIG
+HIREDIS_MAJOR=0
+HIREDIS_MINOR=10
 
 # Fallback to gcc when $CC is not in $PATH.
 CC:=$(shell sh -c 'type $(CC) >/dev/null 2>/dev/null && echo $(CC) || echo gcc')
-CXX:=$(shell sh -c 'type $(CXX) >/dev/null 2>/dev/null && echo $(CXX) || echo g++')
 OPTIMIZATION?=-O3
 WARNINGS=-Wall -W -Wstrict-prototypes -Wwrite-strings
-DEBUG_FLAGS?= -g -ggdb
-REAL_CFLAGS=$(OPTIMIZATION) -fPIC $(CFLAGS) $(WARNINGS) $(DEBUG_FLAGS) $(ARCH)
+DEBUG?= -g -ggdb
+REAL_CFLAGS=$(OPTIMIZATION) -fPIC $(CFLAGS) $(WARNINGS) $(DEBUG) $(ARCH)
 REAL_LDFLAGS=$(LDFLAGS) $(ARCH)
 
 DYLIBSUFFIX=so
 STLIBSUFFIX=a
-DYLIB_MINOR_NAME=$(LIBNAME).$(DYLIBSUFFIX).$(HIREDIS_SONAME)
+DYLIB_MINOR_NAME=$(LIBNAME).$(DYLIBSUFFIX).$(HIREDIS_MAJOR).$(HIREDIS_MINOR)
 DYLIB_MAJOR_NAME=$(LIBNAME).$(DYLIBSUFFIX).$(HIREDIS_MAJOR)
 DYLIBNAME=$(LIBNAME).$(DYLIBSUFFIX)
 DYLIB_MAKE_CMD=$(CC) -shared -Wl,-soname,$(DYLIB_MINOR_NAME) -o $(DYLIBNAME) $(LDFLAGS)
@@ -62,20 +36,20 @@ ifeq ($(uname_S),SunOS)
 endif
 ifeq ($(uname_S),Darwin)
   DYLIBSUFFIX=dylib
-  DYLIB_MINOR_NAME=$(LIBNAME).$(HIREDIS_SONAME).$(DYLIBSUFFIX)
+  DYLIB_MINOR_NAME=$(LIBNAME).$(HIREDIS_MAJOR).$(HIREDIS_MINOR).$(DYLIBSUFFIX)
+  DYLIB_MAJOR_NAME=$(LIBNAME).$(HIREDIS_MAJOR).$(DYLIBSUFFIX)
   DYLIB_MAKE_CMD=$(CC) -shared -Wl,-install_name,$(DYLIB_MINOR_NAME) -o $(DYLIBNAME) $(LDFLAGS)
 endif
 
-all: $(DYLIBNAME) $(STLIBNAME) hiredis-test $(PKGCONFNAME)
+all: $(DYLIBNAME) $(BINS)
 
 # Deps (use make dep to generate this)
-async.o: async.c fmacros.h async.h hiredis.h read.h sds.h net.h dict.c dict.h
-dict.o: dict.c fmacros.h dict.h
-hiredis.o: hiredis.c fmacros.h hiredis.h read.h sds.h net.h
-net.o: net.c fmacros.h net.h hiredis.h read.h sds.h
-read.o: read.c fmacros.h read.h sds.h
+net.o: net.c fmacros.h net.h hiredis.h
+async.o: async.c async.h hiredis.h sds.h dict.c dict.h
+example.o: example.c hiredis.h
+hiredis.o: hiredis.c fmacros.h hiredis.h net.h sds.h
 sds.o: sds.c sds.h
-test.o: test.c fmacros.h hiredis.h read.h sds.h
+test.o: test.c hiredis.h
 
 $(DYLIBNAME): $(OBJ)
 	$(DYLIB_MAKE_CMD) $(OBJ)
@@ -87,68 +61,36 @@ dynamic: $(DYLIBNAME)
 static: $(STLIBNAME)
 
 # Binaries:
-hiredis-example-libevent: examples/example-libevent.c adapters/libevent.h $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. $< -levent $(STLIBNAME)
+hiredis-example-libevent: example-libevent.c adapters/libevent.h $(STLIBNAME)
+	$(CC) -o $@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -levent example-libevent.c $(STLIBNAME)
 
-hiredis-example-libev: examples/example-libev.c adapters/libev.h $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. $< -lev $(STLIBNAME)
-
-hiredis-example-glib: examples/example-glib.c adapters/glib.h $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) $(shell pkg-config --cflags --libs glib-2.0) -I. $< $(STLIBNAME)
-
-hiredis-example-ivykis: examples/example-ivykis.c adapters/ivykis.h $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. $< -livykis $(STLIBNAME)
-
-hiredis-example-macosx: examples/example-macosx.c adapters/macosx.h $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. $< -framework CoreFoundation $(STLIBNAME)
+hiredis-example-libev: example-libev.c adapters/libev.h $(STLIBNAME)
+	$(CC) -o $@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -lev example-libev.c $(STLIBNAME)
 
 ifndef AE_DIR
 hiredis-example-ae:
 	@echo "Please specify AE_DIR (e.g. <redis repository>/src)"
 	@false
 else
-hiredis-example-ae: examples/example-ae.c adapters/ae.h $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. -I$(AE_DIR) $< $(AE_DIR)/ae.o $(AE_DIR)/zmalloc.o $(AE_DIR)/../deps/jemalloc/lib/libjemalloc.a -pthread $(STLIBNAME)
+hiredis-example-ae: example-ae.c adapters/ae.h $(STLIBNAME)
+	$(CC) -o $@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I$(AE_DIR) $(AE_DIR)/ae.o $(AE_DIR)/zmalloc.o example-ae.c $(STLIBNAME)
 endif
 
-ifndef LIBUV_DIR
-hiredis-example-libuv:
-	@echo "Please specify LIBUV_DIR (e.g. ../libuv/)"
-	@false
-else
-hiredis-example-libuv: examples/example-libuv.c adapters/libuv.h $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. -I$(LIBUV_DIR)/include $< $(LIBUV_DIR)/.libs/libuv.a -lpthread -lrt $(STLIBNAME)
-endif
-
-ifeq ($(and $(QT_MOC),$(QT_INCLUDE_DIR),$(QT_LIBRARY_DIR)),)
-hiredis-example-qt:
-	@echo "Please specify QT_MOC, QT_INCLUDE_DIR AND QT_LIBRARY_DIR"
-	@false
-else
-hiredis-example-qt: examples/example-qt.cpp adapters/qt.h $(STLIBNAME)
-	$(QT_MOC) adapters/qt.h -I. -I$(QT_INCLUDE_DIR) -I$(QT_INCLUDE_DIR)/QtCore | \
-	    $(CXX) -x c++ -o qt-adapter-moc.o -c - $(REAL_CFLAGS) -I. -I$(QT_INCLUDE_DIR) -I$(QT_INCLUDE_DIR)/QtCore
-	$(QT_MOC) examples/example-qt.h -I. -I$(QT_INCLUDE_DIR) -I$(QT_INCLUDE_DIR)/QtCore | \
-	    $(CXX) -x c++ -o qt-example-moc.o -c - $(REAL_CFLAGS) -I. -I$(QT_INCLUDE_DIR) -I$(QT_INCLUDE_DIR)/QtCore
-	$(CXX) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. -I$(QT_INCLUDE_DIR) -I$(QT_INCLUDE_DIR)/QtCore -L$(QT_LIBRARY_DIR) qt-adapter-moc.o qt-example-moc.o $< -pthread $(STLIBNAME) -lQtCore
-endif
-
-hiredis-example: examples/example.c $(STLIBNAME)
-	$(CC) -o examples/$@ $(REAL_CFLAGS) $(REAL_LDFLAGS) -I. $< $(STLIBNAME)
-
-examples: $(EXAMPLES)
-
-hiredis-test: test.o $(STLIBNAME)
-
 hiredis-%: %.o $(STLIBNAME)
-	$(CC) $(REAL_CFLAGS) -o $@ $(REAL_LDFLAGS) $< $(STLIBNAME)
+	$(CC) -o $@ $(REAL_LDFLAGS) $< $(STLIBNAME)
 
 test: hiredis-test
 	./hiredis-test
 
 check: hiredis-test
-	@echo "$$REDIS_TEST_CONFIG" | $(REDIS_SERVER) -
-	$(PRE) ./hiredis-test -h 127.0.0.1 -p $(REDIS_PORT) -s /tmp/hiredis-test-redis.sock || \
+	echo \
+		"daemonize yes\n" \
+		"pidfile /tmp/hiredis-test-redis.pid\n" \
+		"port 56379\n" \
+		"bind 127.0.0.1\n" \
+		"unixsocket /tmp/hiredis-test-redis.sock" \
+			| redis-server -
+	./hiredis-test -h 127.0.0.1 -p 56379 -s /tmp/hiredis-test-redis.sock || \
 			( kill `cat /tmp/hiredis-test-redis.pid` && false )
 	kill `cat /tmp/hiredis-test-redis.pid`
 
@@ -156,38 +98,31 @@ check: hiredis-test
 	$(CC) -std=c99 -pedantic -c $(REAL_CFLAGS) $<
 
 clean:
-	rm -rf $(DYLIBNAME) $(STLIBNAME) $(TESTS) $(PKGCONFNAME) examples/hiredis-example* *.o *.gcda *.gcno *.gcov
+	rm -rf $(DYLIBNAME) $(STLIBNAME) $(BINS) hiredis-example* *.o *.gcda *.gcno *.gcov
 
 dep:
 	$(CC) -MM *.c
 
+# Installation related variables and target
+PREFIX?=/usr/local
+INCLUDE_PATH?=include/hiredis
+LIBRARY_PATH?=lib
+INSTALL_INCLUDE_PATH= $(PREFIX)/$(INCLUDE_PATH)
+INSTALL_LIBRARY_PATH= $(PREFIX)/$(LIBRARY_PATH)
+
 ifeq ($(uname_S),SunOS)
   INSTALL?= cp -r
 endif
 
 INSTALL?= cp -a
 
-$(PKGCONFNAME): hiredis.h
-	@echo "Generating $@ for pkgconfig..."
-	@echo prefix=$(PREFIX) > $@
-	@echo exec_prefix=\$${prefix} >> $@
-	@echo libdir=$(PREFIX)/$(LIBRARY_PATH) >> $@
-	@echo includedir=$(PREFIX)/$(INCLUDE_PATH) >> $@
-	@echo >> $@
-	@echo Name: hiredis >> $@
-	@echo Description: Minimalistic C client library for Redis. >> $@
-	@echo Version: $(HIREDIS_MAJOR).$(HIREDIS_MINOR).$(HIREDIS_PATCH) >> $@
-	@echo Libs: -L\$${libdir} -lhiredis >> $@
-	@echo Cflags: -I\$${includedir} -D_FILE_OFFSET_BITS=64 >> $@
-
-install: $(DYLIBNAME) $(STLIBNAME) $(PKGCONFNAME)
+install: $(DYLIBNAME) $(STLIBNAME)
 	mkdir -p $(INSTALL_INCLUDE_PATH) $(INSTALL_LIBRARY_PATH)
-	$(INSTALL) hiredis.h async.h read.h sds.h adapters $(INSTALL_INCLUDE_PATH)
+	$(INSTALL) hiredis.h async.h adapters $(INSTALL_INCLUDE_PATH)
 	$(INSTALL) $(DYLIBNAME) $(INSTALL_LIBRARY_PATH)/$(DYLIB_MINOR_NAME)
-	cd $(INSTALL_LIBRARY_PATH) && ln -sf $(DYLIB_MINOR_NAME) $(DYLIBNAME)
+	cd $(INSTALL_LIBRARY_PATH) && ln -sf $(DYLIB_MINOR_NAME) $(DYLIB_MAJOR_NAME)
+	cd $(INSTALL_LIBRARY_PATH) && ln -sf $(DYLIB_MAJOR_NAME) $(DYLIBNAME)
 	$(INSTALL) $(STLIBNAME) $(INSTALL_LIBRARY_PATH)
-	mkdir -p $(INSTALL_PKGCONF_PATH)
-	$(INSTALL) $(PKGCONFNAME) $(INSTALL_PKGCONF_PATH)
 
 32bit:
 	@echo ""
@@ -195,10 +130,6 @@ install: $(DYLIBNAME) $(STLIBNAME) $(PKGCONFNAME)
 	@echo ""
 	$(MAKE) CFLAGS="-m32" LDFLAGS="-m32"
 
-32bit-vars:
-	$(eval CFLAGS=-m32)
-	$(eval LDFLAGS=-m32)
-
 gprof:
 	$(MAKE) CFLAGS="-pg" LDFLAGS="-pg"
 
@@ -214,4 +145,4 @@ coverage: gcov
 noopt:
 	$(MAKE) OPTIMIZATION=""
 
-.PHONY: all test check clean dep install 32bit 32bit-vars gprof gcov noopt
+.PHONY: all test check clean dep install 32bit gprof gcov noopt

deps/hiredis/README.md

@@ -1,13 +1,9 @@
-[![Build Status](https://travis-ci.org/redis/hiredis.png)](https://travis-ci.org/redis/hiredis)
-
-**This Readme reflects the latest changed in the master branch. See [v0.13.3](https://github.com/redis/hiredis/tree/v0.13.3) for the Readme and documentation for the latest release.**
-
 # HIREDIS
 
 Hiredis is a minimalistic C client library for the [Redis](http://redis.io/) database.
 
 It is minimalistic because it just adds minimal support for the protocol, but
-at the same time it uses a high level printf-alike API in order to make it
+at the same time it uses an high level printf-alike API in order to make it
 much higher level than otherwise suggested by its minimal code base and the
 lack of explicit bindings for every Redis command.
 
@@ -22,15 +18,7 @@ Redis version >= 1.2.0.
 The library comes with multiple APIs. There is the
 *synchronous API*, the *asynchronous API* and the *reply parsing API*.
 
-## Upgrading to `1.0.0`
-
-Version 1.0.0 marks a stable release of hiredis.
-It includes some minor breaking changes, mostly to make the exposed API more uniform and self-explanatory.
-It also bundles the updated `sds` library, to sync up with upstream and Redis.
-For most applications a recompile against the new hiredis should be enough.
-For code changes see the [Changelog](CHANGELOG.md).
-
-## Upgrading from `<0.9.0`
+## UPGRADING
 
 Version 0.9.0 is a major overhaul of hiredis in every aspect. However, upgrading existing
 code using hiredis should not be a big pain. The key thing to keep in mind when
@@ -41,62 +29,51 @@ the stateless 0.0.1 that only has a file descriptor to work with.
 
 To consume the synchronous API, there are only a few function calls that need to be introduced:
 
-```c
-redisContext *redisConnect(const char *ip, int port);
-void *redisCommand(redisContext *c, const char *format, ...);
-void freeReplyObject(void *reply);
-```
+    redisContext *redisConnect(const char *ip, int port);
+    void *redisCommand(redisContext *c, const char *format, ...);
+    void freeReplyObject(void *reply);
 
 ### Connecting
 
 The function `redisConnect` is used to create a so-called `redisContext`. The
 context is where Hiredis holds state for a connection. The `redisContext`
-struct has an integer `err` field that is non-zero when the connection is in
+struct has an integer `err` field that is non-zero when an the connection is in
 an error state. The field `errstr` will contain a string with a description of
 the error. More information on errors can be found in the **Errors** section.
 After trying to connect to Redis using `redisConnect` you should
 check the `err` field to see if establishing the connection was successful:
-```c
-redisContext *c = redisConnect("127.0.0.1", 6379);
-if (c == NULL || c->err) {
-    if (c) {
+
+    redisContext *c = redisConnect("127.0.0.1", 6379);
+    if (c->err) {
         printf("Error: %s\n", c->errstr);
         // handle error
-    } else {
-        printf("Can't allocate redis context\n");
     }
-}
-```
-
-*Note: A `redisContext` is not thread-safe.*
 
 ### Sending commands
 
 There are several ways to issue commands to Redis. The first that will be introduced is
 `redisCommand`. This function takes a format similar to printf. In the simplest form,
 it is used like this:
-```c
-reply = redisCommand(context, "SET foo bar");
-```
+
+    reply = redisCommand(context, "SET foo bar");
 
 The specifier `%s` interpolates a string in the command, and uses `strlen` to
 determine the length of the string:
-```c
-reply = redisCommand(context, "SET foo %s", value);
-```
+
+    reply = redisCommand(context, "SET foo %s", value);
+
 When you need to pass binary safe strings in a command, the `%b` specifier can be
 used. Together with a pointer to the string, it requires a `size_t` length argument
 of the string:
-```c
-reply = redisCommand(context, "SET foo %b", value, (size_t) valuelen);
-```
+
+    reply = redisCommand(context, "SET foo %b", value, valuelen);
+
 Internally, Hiredis splits the command in different arguments and will
 convert it to the protocol used to communicate with Redis.
 One or more spaces separates arguments, so you can use the specifiers
 anywhere in an argument:
-```c
-reply = redisCommand(context, "SET key:%s %s", myid, value);
-```
+
+    reply = redisCommand(context, "SET key:%s %s", myid, value);
 
 ### Using replies
 
@@ -135,11 +112,11 @@ was received:
       Redis may reply with nested arrays but this is fully supported.
 
 Replies should be freed using the `freeReplyObject()` function.
-Note that this function will take care of freeing sub-reply objects
+Note that this function will take care of freeing sub-replies objects
 contained in arrays and nested arrays, so there is no need for the user to
 free the sub replies (it is actually harmful and will corrupt the memory).
 
-**Important:** the current version of hiredis (0.10.0) frees replies when the
+**Important:** the current version of hiredis (0.10.0) free's replies when the
 asynchronous API is used. This means you should not call `freeReplyObject` when
 you use this API. The reply is cleaned up by hiredis _after_ the callback
 returns. This behavior will probably change in future releases, so make sure to
@@ -148,19 +125,19 @@ keep an eye on the changelog when upgrading (see issue #39).
 ### Cleaning up
 
 To disconnect and free the context the following function can be used:
-```c
-void redisFree(redisContext *c);
-```
-This function immediately closes the socket and then frees the allocations done in
+
+    void redisFree(redisContext *c);
+
+This function immediately closes the socket and then free's the allocations done in
 creating the context.
 
 ### Sending commands (cont'd)
 
 Together with `redisCommand`, the function `redisCommandArgv` can be used to issue commands.
 It has the following prototype:
-```c
-void *redisCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
-```
+
+    void *redisCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
+
 It takes the number of arguments `argc`, an array of strings `argv` and the lengths of the
 arguments `argvlen`. For convenience, `argvlen` may be set to `NULL` and the function will
 use `strlen(3)` on every argument to determine its length. Obviously, when any of the arguments
@@ -190,10 +167,10 @@ The function `redisGetReply` is exported as part of the Hiredis API and can be u
 is expected on the socket. To pipeline commands, the only things that needs to be done is
 filling up the output buffer. For this cause, two commands can be used that are identical
 to the `redisCommand` family, apart from not returning a reply:
-```c
-void redisAppendCommand(redisContext *c, const char *format, ...);
-void redisAppendCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
-```
+
+    void redisAppendCommand(redisContext *c, const char *format, ...);
+    void redisAppendCommandArgv(redisContext *c, int argc, const char **argv, const size_t *argvlen);
+
 After calling either function one or more times, `redisGetReply` can be used to receive the
 subsequent replies. The return value for this function is either `REDIS_OK` or `REDIS_ERR`, where
 the latter means an error occurred while reading a reply. Just as with the other commands,
@@ -201,24 +178,24 @@ the `err` field in the context can be used to find out what the cause of this er
 
 The following examples shows a simple pipeline (resulting in only a single call to `write(2)` and
 a single call to `read(2)`):
-```c
-redisReply *reply;
-redisAppendCommand(context,"SET foo bar");
-redisAppendCommand(context,"GET foo");
-redisGetReply(context,&reply); // reply for SET
-freeReplyObject(reply);
-redisGetReply(context,&reply); // reply for GET
-freeReplyObject(reply);
-```
-This API can also be used to implement a blocking subscriber:
-```c
-reply = redisCommand(context,"SUBSCRIBE foo");
-freeReplyObject(reply);
-while(redisGetReply(context,&reply) == REDIS_OK) {
-    // consume message
+
+    redisReply *reply;
+    redisAppendCommand(context,"SET foo bar");
+    redisAppendCommand(context,"GET foo");
+    redisGetReply(context,&reply); // reply for SET
     freeReplyObject(reply);
-}
-```
+    redisGetReply(context,&reply); // reply for GET
+    freeReplyObject(reply);
+
+This API can also be used to implement a blocking subscriber:
+
+    reply = redisCommand(context,"SUBSCRIBE foo");
+    freeReplyObject(reply);
+    while(redisGetReply(context,&reply) == REDIS_OK) {
+        // consume message
+        freeReplyObject(reply);
+    }
+
 ### Errors
 
 When a function call is not successful, depending on the function either `NULL` or `REDIS_ERR` is
@@ -258,62 +235,58 @@ should be checked after creation to see if there were errors creating the connec
 Because the connection that will be created is non-blocking, the kernel is not able to
 instantly return if the specified host and port is able to accept a connection.
 
-*Note: A `redisAsyncContext` is not thread-safe.*
-
-```c
-redisAsyncContext *c = redisAsyncConnect("127.0.0.1", 6379);
-if (c->err) {
-    printf("Error: %s\n", c->errstr);
-    // handle error
-}
-```
+    redisAsyncContext *c = redisAsyncConnect("127.0.0.1", 6379);
+    if (c->err) {
+        printf("Error: %s\n", c->errstr);
+        // handle error
+    }
 
 The asynchronous context can hold a disconnect callback function that is called when the
 connection is disconnected (either because of an error or per user request). This function should
 have the following prototype:
-```c
-void(const redisAsyncContext *c, int status);
-```
+
+    void(const redisAsyncContext *c, int status);
+
 On a disconnect, the `status` argument is set to `REDIS_OK` when disconnection was initiated by the
 user, or `REDIS_ERR` when the disconnection was caused by an error. When it is `REDIS_ERR`, the `err`
 field in the context can be accessed to find out the cause of the error.
 
-The context object is always freed after the disconnect callback fired. When a reconnect is needed,
+The context object is always free'd after the disconnect callback fired. When a reconnect is needed,
 the disconnect callback is a good point to do so.
 
 Setting the disconnect callback can only be done once per context. For subsequent calls it will
 return `REDIS_ERR`. The function to set the disconnect callback has the following prototype:
-```c
-int redisAsyncSetDisconnectCallback(redisAsyncContext *ac, redisDisconnectCallback *fn);
-```
+
+    int redisAsyncSetDisconnectCallback(redisAsyncContext *ac, redisDisconnectCallback *fn);
+
 ### Sending commands and their callbacks
 
 In an asynchronous context, commands are automatically pipelined due to the nature of an event loop.
 Therefore, unlike the synchronous API, there is only a single way to send commands.
 Because commands are sent to Redis asynchronously, issuing a command requires a callback function
 that is called when the reply is received. Reply callbacks should have the following prototype:
-```c
-void(redisAsyncContext *c, void *reply, void *privdata);
-```
+
+    void(redisAsyncContext *c, void *reply, void *privdata);
+
 The `privdata` argument can be used to curry arbitrary data to the callback from the point where
 the command is initially queued for execution.
 
 The functions that can be used to issue commands in an asynchronous context are:
-```c
-int redisAsyncCommand(
-  redisAsyncContext *ac, redisCallbackFn *fn, void *privdata,
-  const char *format, ...);
-int redisAsyncCommandArgv(
-  redisAsyncContext *ac, redisCallbackFn *fn, void *privdata,
-  int argc, const char **argv, const size_t *argvlen);
-```
+
+    int redisAsyncCommand(
+      redisAsyncContext *ac, redisCallbackFn *fn, void *privdata,
+      const char *format, ...);
+    int redisAsyncCommandArgv(
+      redisAsyncContext *ac, redisCallbackFn *fn, void *privdata,
+      int argc, const char **argv, const size_t *argvlen);
+
 Both functions work like their blocking counterparts. The return value is `REDIS_OK` when the command
 was successfully added to the output buffer and `REDIS_ERR` otherwise. Example: when the connection
 is being disconnected per user-request, no new commands may be added to the output buffer and `REDIS_ERR` is
 returned on calls to the `redisAsyncCommand` family.
 
-If the reply for a command with a `NULL` callback is read, it is immediately freed. When the callback
-for a command is non-`NULL`, the memory is freed immediately following the callback: the reply is only
+If the reply for a command with a `NULL` callback is read, it is immediately free'd. When the callback
+for a command is non-`NULL`, the memory is free'd immediately following the callback: the reply is only
 valid for the duration of the callback.
 
 All pending callbacks are called with a `NULL` reply when the context encountered an error.
@@ -321,14 +294,14 @@ All pending callbacks are called with a `NULL` reply when the context encountere
 ### Disconnecting
 
 An asynchronous connection can be terminated using:
-```c
-void redisAsyncDisconnect(redisAsyncContext *ac);
-```
+
+    void redisAsyncDisconnect(redisAsyncContext *ac);
+
 When this function is called, the connection is **not** immediately terminated. Instead, new
 commands are no longer accepted and the connection is only terminated when all pending commands
 have been written to the socket, their respective replies have been read and their respective
 callbacks have been executed. After this, the disconnection callback is executed with the
-`REDIS_OK` status and the context object is freed.
+`REDIS_OK` status and the context object is free'd.
 
 ### Hooking it up to event library *X*
 
@@ -341,12 +314,12 @@ Hiredis comes with a reply parsing API that makes it easy for writing higher
 level language bindings.
 
 The reply parsing API consists of the following functions:
-```c
-redisReader *redisReaderCreate(void);
-void redisReaderFree(redisReader *reader);
-int redisReaderFeed(redisReader *reader, const char *buf, size_t len);
-int redisReaderGetReply(redisReader *reader, void **reply);
-```
+
+    redisReader *redisReaderCreate(void);
+    void redisReaderFree(redisReader *reader);
+    int redisReaderFeed(redisReader *reader, const char *buf, size_t len);
+    int redisReaderGetReply(redisReader *reader, void **reply);
+
 The same set of functions are used internally by hiredis when creating a
 normal Redis context, the above API just exposes it to the user for a direct
 usage.
@@ -364,9 +337,6 @@ and a reply object (as described above) via `void **reply`. The returned status
 can be either `REDIS_OK` or `REDIS_ERR`, where the latter means something went
 wrong (either a protocol error, or an out of memory error).
 
-The parser limits the level of nesting for multi bulk payloads to 7. If the
-multi bulk nesting level is higher than this, the parser returns an error.
-
 ### Customizing replies
 
 The function `redisReaderGetReply` creates `redisReply` and makes the function
@@ -386,7 +356,7 @@ Both when using the Reader API directly or when using it indirectly via a
 normal Redis context, the redisReader structure uses a buffer in order to
 accumulate data from the server.
 Usually this buffer is destroyed when it is empty and is larger than 16
-KiB in order to avoid wasting memory in unused buffers
+kb in order to avoid wasting memory in unused buffers
 
 However when working with very big payloads destroying the buffer may slow
 down performances considerably, so it is possible to modify the max size of
@@ -396,9 +366,9 @@ value for an idle buffer, so the buffer will never get freed.
 
 For instance if you have a normal Redis context you can set the maximum idle
 buffer to zero (unlimited) just with:
-```c
-context->reader->maxbuf = 0;
-```
+
+    context->reader->maxbuf = 0;
+
 This should be done only in order to maximize performances when working with
 large payloads. The context should be set back to `REDIS_READER_MAX_BUF` again
 as soon as possible in order to prevent allocation of useless memory.
@@ -406,6 +376,4 @@ as soon as possible in order to prevent allocation of useless memory.
 ## AUTHORS
 
 Hiredis was written by Salvatore Sanfilippo (antirez at gmail) and
-Pieter Noordhuis (pcnoordhuis at gmail) and is released under the BSD license.  
-Hiredis is currently maintained by Matt Stancliff (matt at genges dot com) and
-Jan-Erik Rediger (janerik at fnordig dot com)
+Pieter Noordhuis (pcnoordhuis at gmail) and is released under the BSD license.

deps/hiredis/adapters/glib.h

@@ -1,153 +0,0 @@
-#ifndef __HIREDIS_GLIB_H__
-#define __HIREDIS_GLIB_H__
-
-#include <glib.h>
-
-#include "../hiredis.h"
-#include "../async.h"
-
-typedef struct
-{
-    GSource source;
-    redisAsyncContext *ac;
-    GPollFD poll_fd;
-} RedisSource;
-
-static void
-redis_source_add_read (gpointer data)
-{
-    RedisSource *source = (RedisSource *)data;
-    g_return_if_fail(source);
-    source->poll_fd.events |= G_IO_IN;
-    g_main_context_wakeup(g_source_get_context((GSource *)data));
-}
-
-static void
-redis_source_del_read (gpointer data)
-{
-    RedisSource *source = (RedisSource *)data;
-    g_return_if_fail(source);
-    source->poll_fd.events &= ~G_IO_IN;
-    g_main_context_wakeup(g_source_get_context((GSource *)data));
-}
-
-static void
-redis_source_add_write (gpointer data)
-{
-    RedisSource *source = (RedisSource *)data;
-    g_return_if_fail(source);
-    source->poll_fd.events |= G_IO_OUT;
-    g_main_context_wakeup(g_source_get_context((GSource *)data));
-}
-
-static void
-redis_source_del_write (gpointer data)
-{
-    RedisSource *source = (RedisSource *)data;
-    g_return_if_fail(source);
-    source->poll_fd.events &= ~G_IO_OUT;
-    g_main_context_wakeup(g_source_get_context((GSource *)data));
-}
-
-static void
-redis_source_cleanup (gpointer data)
-{
-    RedisSource *source = (RedisSource *)data;
-
-    g_return_if_fail(source);
-
-    redis_source_del_read(source);
-    redis_source_del_write(source);
-    /*
-     * It is not our responsibility to remove ourself from the
-     * current main loop. However, we will remove the GPollFD.
-     */
-    if (source->poll_fd.fd >= 0) {
-        g_source_remove_poll((GSource *)data, &source->poll_fd);
-        source->poll_fd.fd = -1;
-    }
-}
-
-static gboolean
-redis_source_prepare (GSource *source,
-                      gint    *timeout_)
-{
-    RedisSource *redis = (RedisSource *)source;
-    *timeout_ = -1;
-    return !!(redis->poll_fd.events & redis->poll_fd.revents);
-}
-
-static gboolean
-redis_source_check (GSource *source)
-{
-    RedisSource *redis = (RedisSource *)source;
-    return !!(redis->poll_fd.events & redis->poll_fd.revents);
-}
-
-static gboolean
-redis_source_dispatch (GSource      *source,
-                       GSourceFunc   callback,
-                       gpointer      user_data)
-{
-    RedisSource *redis = (RedisSource *)source;
-
-    if ((redis->poll_fd.revents & G_IO_OUT)) {
-        redisAsyncHandleWrite(redis->ac);
-        redis->poll_fd.revents &= ~G_IO_OUT;
-    }
-
-    if ((redis->poll_fd.revents & G_IO_IN)) {
-        redisAsyncHandleRead(redis->ac);
-        redis->poll_fd.revents &= ~G_IO_IN;
-    }
-
-    if (callback) {
-        return callback(user_data);
-    }
-
-    return TRUE;
-}
-
-static void
-redis_source_finalize (GSource *source)
-{
-    RedisSource *redis = (RedisSource *)source;
-
-    if (redis->poll_fd.fd >= 0) {
-        g_source_remove_poll(source, &redis->poll_fd);
-        redis->poll_fd.fd = -1;
-    }
-}
-
-static GSource *
-redis_source_new (redisAsyncContext *ac)
-{
-    static GSourceFuncs source_funcs = {
-        .prepare  = redis_source_prepare,
-        .check     = redis_source_check,
-        .dispatch = redis_source_dispatch,
-        .finalize = redis_source_finalize,
-    };
-    redisContext *c = &ac->c;
-    RedisSource *source;
-
-    g_return_val_if_fail(ac != NULL, NULL);
-
-    source = (RedisSource *)g_source_new(&source_funcs, sizeof *source);
-    source->ac = ac;
-    source->poll_fd.fd = c->fd;
-    source->poll_fd.events = 0;
-    source->poll_fd.revents = 0;
-    g_source_add_poll((GSource *)source, &source->poll_fd);
-
-    ac->ev.addRead = redis_source_add_read;
-    ac->ev.delRead = redis_source_del_read;
-    ac->ev.addWrite = redis_source_add_write;
-    ac->ev.delWrite = redis_source_del_write;
-    ac->ev.cleanup = redis_source_cleanup;
-    ac->ev.data = source;
-
-    return (GSource *)source;
-}
-
-#endif /* __HIREDIS_GLIB_H__ */

deps/hiredis/adapters/ivykis.h

@@ -1,81 +0,0 @@
-#ifndef __HIREDIS_IVYKIS_H__
-#define __HIREDIS_IVYKIS_H__
-#include <iv.h>
-#include "../hiredis.h"
-#include "../async.h"
-
-typedef struct redisIvykisEvents {
-    redisAsyncContext *context;
-    struct iv_fd fd;
-} redisIvykisEvents;
-
-static void redisIvykisReadEvent(void *arg) {
-    redisAsyncContext *context = (redisAsyncContext *)arg;
-    redisAsyncHandleRead(context);
-}
-
-static void redisIvykisWriteEvent(void *arg) {
-    redisAsyncContext *context = (redisAsyncContext *)arg;
-    redisAsyncHandleWrite(context);
-}
-
-static void redisIvykisAddRead(void *privdata) {
-    redisIvykisEvents *e = (redisIvykisEvents*)privdata;
-    iv_fd_set_handler_in(&e->fd, redisIvykisReadEvent);
-}
-
-static void redisIvykisDelRead(void *privdata) {
-    redisIvykisEvents *e = (redisIvykisEvents*)privdata;
-    iv_fd_set_handler_in(&e->fd, NULL);
-}
-
-static void redisIvykisAddWrite(void *privdata) {
-    redisIvykisEvents *e = (redisIvykisEvents*)privdata;
-    iv_fd_set_handler_out(&e->fd, redisIvykisWriteEvent);
-}
-
-static void redisIvykisDelWrite(void *privdata) {
-    redisIvykisEvents *e = (redisIvykisEvents*)privdata;
-    iv_fd_set_handler_out(&e->fd, NULL);
-}
-
-static void redisIvykisCleanup(void *privdata) {
-    redisIvykisEvents *e = (redisIvykisEvents*)privdata;
-
-    iv_fd_unregister(&e->fd);
-    free(e);
-}
-
-static int redisIvykisAttach(redisAsyncContext *ac) {
-    redisContext *c = &(ac->c);
-    redisIvykisEvents *e;
-
-    /* Nothing should be attached when something is already attached */
-    if (ac->ev.data != NULL)
-        return REDIS_ERR;
-
-    /* Create container for context and r/w events */
-    e = (redisIvykisEvents*)malloc(sizeof(*e));
-    e->context = ac;
-
-    /* Register functions to start/stop listening for events */
-    ac->ev.addRead = redisIvykisAddRead;
-    ac->ev.delRead = redisIvykisDelRead;
-    ac->ev.addWrite = redisIvykisAddWrite;
-    ac->ev.delWrite = redisIvykisDelWrite;
-    ac->ev.cleanup = redisIvykisCleanup;
-    ac->ev.data = e;
-
-    /* Initialize and install read/write events */
-    IV_FD_INIT(&e->fd);
-    e->fd.fd = c->fd;
-    e->fd.handler_in = redisIvykisReadEvent;
-    e->fd.handler_out = redisIvykisWriteEvent;
-    e->fd.handler_err = NULL;
-    e->fd.cookie = e->context;
-
-    iv_fd_register(&e->fd);
-
-    return REDIS_OK;
-}
-#endif

deps/hiredis/adapters/libevent.h

@@ -30,13 +30,13 @@
 
 #ifndef __HIREDIS_LIBEVENT_H__
 #define __HIREDIS_LIBEVENT_H__
-#include <event2/event.h>
+#include <event.h>
 #include "../hiredis.h"
 #include "../async.h"
 
 typedef struct redisLibeventEvents {
     redisAsyncContext *context;
-    struct event *rev, *wev;
+    struct event rev, wev;
 } redisLibeventEvents;
 
 static void redisLibeventReadEvent(int fd, short event, void *arg) {
@@ -53,28 +53,28 @@ static void redisLibeventWriteEvent(int fd, short event, void *arg) {
 
 static void redisLibeventAddRead(void *privdata) {
     redisLibeventEvents *e = (redisLibeventEvents*)privdata;
-    event_add(e->rev,NULL);
+    event_add(&e->rev,NULL);
 }
 
 static void redisLibeventDelRead(void *privdata) {
     redisLibeventEvents *e = (redisLibeventEvents*)privdata;
-    event_del(e->rev);
+    event_del(&e->rev);
 }
 
 static void redisLibeventAddWrite(void *privdata) {
     redisLibeventEvents *e = (redisLibeventEvents*)privdata;
-    event_add(e->wev,NULL);
+    event_add(&e->wev,NULL);
 }
 
 static void redisLibeventDelWrite(void *privdata) {
     redisLibeventEvents *e = (redisLibeventEvents*)privdata;
-    event_del(e->wev);
+    event_del(&e->wev);
 }
 
 static void redisLibeventCleanup(void *privdata) {
     redisLibeventEvents *e = (redisLibeventEvents*)privdata;
-    event_del(e->rev);
-    event_del(e->wev);
+    event_del(&e->rev);
+    event_del(&e->wev);
     free(e);
 }
 
@@ -99,10 +99,10 @@ static int redisLibeventAttach(redisAsyncContext *ac, struct event_base *base) {
     ac->ev.data = e;
 
     /* Initialize and install read/write events */
-    e->rev = event_new(base, c->fd, EV_READ, redisLibeventReadEvent, e);
-    e->wev = event_new(base, c->fd, EV_WRITE, redisLibeventWriteEvent, e);
-    event_add(e->rev, NULL);
-    event_add(e->wev, NULL);
+    event_set(&e->rev,c->fd,EV_READ,redisLibeventReadEvent,e);
+    event_set(&e->wev,c->fd,EV_WRITE,redisLibeventWriteEvent,e);
+    event_base_set(base,&e->rev);
+    event_base_set(base,&e->wev);
     return REDIS_OK;
 }
 #endif

deps/hiredis/adapters/libuv.h

@@ -1,122 +0,0 @@
-#ifndef __HIREDIS_LIBUV_H__
-#define __HIREDIS_LIBUV_H__
-#include <stdlib.h>
-#include <uv.h>
-#include "../hiredis.h"
-#include "../async.h"
-#include <string.h>
-
-typedef struct redisLibuvEvents {
-  redisAsyncContext* context;
-  uv_poll_t          handle;
-  int                events;
-} redisLibuvEvents;
-
-
-static void redisLibuvPoll(uv_poll_t* handle, int status, int events) {
-  redisLibuvEvents* p = (redisLibuvEvents*)handle->data;
-
-  if (status != 0) {
-    return;
-  }
-
-  if (p->context != NULL && (events & UV_READABLE)) {
-    redisAsyncHandleRead(p->context);
-  }
-  if (p->context != NULL && (events & UV_WRITABLE)) {
-    redisAsyncHandleWrite(p->context);
-  }
-}
-
-
-static void redisLibuvAddRead(void *privdata) {
-  redisLibuvEvents* p = (redisLibuvEvents*)privdata;
-
-  p->events |= UV_READABLE;
-
-  uv_poll_start(&p->handle, p->events, redisLibuvPoll);
-}
-
-
-static void redisLibuvDelRead(void *privdata) {
-  redisLibuvEvents* p = (redisLibuvEvents*)privdata;
-
-  p->events &= ~UV_READABLE;
-
-  if (p->events) {
-    uv_poll_start(&p->handle, p->events, redisLibuvPoll);
-  } else {
-    uv_poll_stop(&p->handle);
-  }
-}
-
-
-static void redisLibuvAddWrite(void *privdata) {
-  redisLibuvEvents* p = (redisLibuvEvents*)privdata;
-
-  p->events |= UV_WRITABLE;
-
-  uv_poll_start(&p->handle, p->events, redisLibuvPoll);
-}
-
-
-static void redisLibuvDelWrite(void *privdata) {
-  redisLibuvEvents* p = (redisLibuvEvents*)privdata;
-
-  p->events &= ~UV_WRITABLE;
-
-  if (p->events) {
-    uv_poll_start(&p->handle, p->events, redisLibuvPoll);
-  } else {
-    uv_poll_stop(&p->handle);
-  }
-}
-
-
-static void on_close(uv_handle_t* handle) {
-  redisLibuvEvents* p = (redisLibuvEvents*)handle->data;
-
-  free(p);
-}
-
-
-static void redisLibuvCleanup(void *privdata) {
-  redisLibuvEvents* p = (redisLibuvEvents*)privdata;
-
-  p->context = NULL; // indicate that context might no longer exist
-  uv_close((uv_handle_t*)&p->handle, on_close);
-}
-
-
-static int redisLibuvAttach(redisAsyncContext* ac, uv_loop_t* loop) {
-  redisContext *c = &(ac->c);
-
-  if (ac->ev.data != NULL) {
-    return REDIS_ERR;
-  }
-
-  ac->ev.addRead  = redisLibuvAddRead;
-  ac->ev.delRead  = redisLibuvDelRead;
-  ac->ev.addWrite = redisLibuvAddWrite;
-  ac->ev.delWrite = redisLibuvDelWrite;
-  ac->ev.cleanup  = redisLibuvCleanup;
-
-  redisLibuvEvents* p = (redisLibuvEvents*)malloc(sizeof(*p));
-
-  if (!p) {
-    return REDIS_ERR;
-  }
-
-  memset(p, 0, sizeof(*p));
-
-  if (uv_poll_init(loop, &p->handle, c->fd) != 0) {
-    return REDIS_ERR;
-  }
-
-  ac->ev.data    = p;
-  p->handle.data = p;
-  p->context     = ac;
-
-  return REDIS_OK;
-}
-#endif

deps/hiredis/adapters/macosx.h

@@ -1,114 +0,0 @@
-//
-//  Created by Дмитрий Бахвалов on 13.07.15.
-//  Copyright (c) 2015 Dmitry Bakhvalov. All rights reserved.
-//
-
-#ifndef __HIREDIS_MACOSX_H__
-#define __HIREDIS_MACOSX_H__
-
-#include <CoreFoundation/CoreFoundation.h>
-
-#include "../hiredis.h"
-#include "../async.h"
-
-typedef struct {
-    redisAsyncContext *context;
-    CFSocketRef socketRef;
-    CFRunLoopSourceRef sourceRef;
-} RedisRunLoop;
-
-static int freeRedisRunLoop(RedisRunLoop* redisRunLoop) {
-    if( redisRunLoop != NULL ) {
-        if( redisRunLoop->sourceRef != NULL ) {
-            CFRunLoopSourceInvalidate(redisRunLoop->sourceRef);
-            CFRelease(redisRunLoop->sourceRef);
-        }
-        if( redisRunLoop->socketRef != NULL ) {
-            CFSocketInvalidate(redisRunLoop->socketRef);
-            CFRelease(redisRunLoop->socketRef);
-        }
-        free(redisRunLoop);
-    }
-    return REDIS_ERR;
-}
-
-static void redisMacOSAddRead(void *privdata) {
-    RedisRunLoop *redisRunLoop = (RedisRunLoop*)privdata;
-    CFSocketEnableCallBacks(redisRunLoop->socketRef, kCFSocketReadCallBack);
-}
-
-static void redisMacOSDelRead(void *privdata) {
-    RedisRunLoop *redisRunLoop = (RedisRunLoop*)privdata;
-    CFSocketDisableCallBacks(redisRunLoop->socketRef, kCFSocketReadCallBack);
-}
-
-static void redisMacOSAddWrite(void *privdata) {
-    RedisRunLoop *redisRunLoop = (RedisRunLoop*)privdata;
-    CFSocketEnableCallBacks(redisRunLoop->socketRef, kCFSocketWriteCallBack);
-}
-
-static void redisMacOSDelWrite(void *privdata) {
-    RedisRunLoop *redisRunLoop = (RedisRunLoop*)privdata;
-    CFSocketDisableCallBacks(redisRunLoop->socketRef, kCFSocketWriteCallBack);
-}
-
-static void redisMacOSCleanup(void *privdata) {
-    RedisRunLoop *redisRunLoop = (RedisRunLoop*)privdata;
-    freeRedisRunLoop(redisRunLoop);
-}
-
-static void redisMacOSAsyncCallback(CFSocketRef __unused s, CFSocketCallBackType callbackType, CFDataRef __unused address, const void __unused *data, void *info) {
-    redisAsyncContext* context = (redisAsyncContext*) info;
-
-    switch (callbackType) {
-        case kCFSocketReadCallBack:
-            redisAsyncHandleRead(context);
-            break;
-
-        case kCFSocketWriteCallBack:
-            redisAsyncHandleWrite(context);
-            break;
-
-        default:
-            break;
-    }
-}
-
-static int redisMacOSAttach(redisAsyncContext *redisAsyncCtx, CFRunLoopRef runLoop) {
-    redisContext *redisCtx = &(redisAsyncCtx->c);
-
-    /* Nothing should be attached when something is already attached */
-    if( redisAsyncCtx->ev.data != NULL ) return REDIS_ERR;
-
-    RedisRunLoop* redisRunLoop = (RedisRunLoop*) calloc(1, sizeof(RedisRunLoop));
-    if( !redisRunLoop ) return REDIS_ERR;
-
-    /* Setup redis stuff */
-    redisRunLoop->context = redisAsyncCtx;
-
-    redisAsyncCtx->ev.addRead  = redisMacOSAddRead;
-    redisAsyncCtx->ev.delRead  = redisMacOSDelRead;
-    redisAsyncCtx->ev.addWrite = redisMacOSAddWrite;
-    redisAsyncCtx->ev.delWrite = redisMacOSDelWrite;
-    redisAsyncCtx->ev.cleanup  = redisMacOSCleanup;
-    redisAsyncCtx->ev.data     = redisRunLoop;
-
-    /* Initialize and install read/write events */
-    CFSocketContext socketCtx = { 0, redisAsyncCtx, NULL, NULL, NULL };
-
-    redisRunLoop->socketRef = CFSocketCreateWithNative(NULL, redisCtx->fd,
-                                                       kCFSocketReadCallBack | kCFSocketWriteCallBack,
-                                                       redisMacOSAsyncCallback,
-                                                       &socketCtx);
-    if( !redisRunLoop->socketRef ) return freeRedisRunLoop(redisRunLoop);
-
-    redisRunLoop->sourceRef = CFSocketCreateRunLoopSource(NULL, redisRunLoop->socketRef, 0);
-    if( !redisRunLoop->sourceRef ) return freeRedisRunLoop(redisRunLoop);
-
-    CFRunLoopAddSource(runLoop, redisRunLoop->sourceRef, kCFRunLoopDefaultMode);
-
-    return REDIS_OK;
-}
-
-#endif
-

deps/hiredis/adapters/qt.h

@@ -1,135 +0,0 @@
-/*-
- * Copyright (C) 2014 Pietro Cerutti <gahr@gahr.ch>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef __HIREDIS_QT_H__
-#define __HIREDIS_QT_H__
-#include <QSocketNotifier>
-#include "../async.h"
-
-static void RedisQtAddRead(void *);
-static void RedisQtDelRead(void *);
-static void RedisQtAddWrite(void *);
-static void RedisQtDelWrite(void *);
-static void RedisQtCleanup(void *);
-
-class RedisQtAdapter : public QObject {
-
-    Q_OBJECT
-
-    friend
-    void RedisQtAddRead(void * adapter) {
-        RedisQtAdapter * a = static_cast<RedisQtAdapter *>(adapter);
-        a->addRead();
-    }
-
-    friend
-    void RedisQtDelRead(void * adapter) {
-        RedisQtAdapter * a = static_cast<RedisQtAdapter *>(adapter);
-        a->delRead();
-    }
-
-    friend
-    void RedisQtAddWrite(void * adapter) {
-        RedisQtAdapter * a = static_cast<RedisQtAdapter *>(adapter);
-        a->addWrite();
-    }
-
-    friend
-    void RedisQtDelWrite(void * adapter) {
-        RedisQtAdapter * a = static_cast<RedisQtAdapter *>(adapter);
-        a->delWrite();
-    }
-
-    friend
-    void RedisQtCleanup(void * adapter) {
-        RedisQtAdapter * a = static_cast<RedisQtAdapter *>(adapter);
-        a->cleanup();
-    }
-
-    public:
-        RedisQtAdapter(QObject * parent = 0)
-            : QObject(parent), m_ctx(0), m_read(0), m_write(0) { }
-
-        ~RedisQtAdapter() {
-            if (m_ctx != 0) {
-                m_ctx->ev.data = NULL;
-            }
-        }
-
-        int setContext(redisAsyncContext * ac) {
-            if (ac->ev.data != NULL) {
-                return REDIS_ERR;
-            }
-            m_ctx = ac;
-            m_ctx->ev.data = this;
-            m_ctx->ev.addRead = RedisQtAddRead;
-            m_ctx->ev.delRead = RedisQtDelRead;
-            m_ctx->ev.addWrite = RedisQtAddWrite;
-            m_ctx->ev.delWrite = RedisQtDelWrite;
-            m_ctx->ev.cleanup = RedisQtCleanup;
-            return REDIS_OK;
-        }
-
-    private:
-        void addRead() {
-            if (m_read) return;
-            m_read = new QSocketNotifier(m_ctx->c.fd, QSocketNotifier::Read, 0);
-            connect(m_read, SIGNAL(activated(int)), this, SLOT(read()));
-        }
-
-        void delRead() {
-            if (!m_read) return;
-            delete m_read;
-            m_read = 0;
-        }
-
-        void addWrite() {
-            if (m_write) return;
-            m_write = new QSocketNotifier(m_ctx->c.fd, QSocketNotifier::Write, 0);
-            connect(m_write, SIGNAL(activated(int)), this, SLOT(write()));
-        }
-
-        void delWrite() {
-            if (!m_write) return;
-            delete m_write;
-            m_write = 0;
-        }
-
-        void cleanup() {
-            delRead();
-            delWrite();
-        }
-
-    private slots:
-        void read() { redisAsyncHandleRead(m_ctx); }
-        void write() { redisAsyncHandleWrite(m_ctx); }
-
-    private:
-        redisAsyncContext * m_ctx;
-        QSocketNotifier * m_read;
-        QSocketNotifier * m_write;
-};
-
-#endif /* !__HIREDIS_QT_H__ */

deps/hiredis/appveyor.yml

@@ -1,36 +0,0 @@
-# Appveyor configuration file for CI build of hiredis on Windows (under Cygwin)
-environment:
-    matrix:
-        - CYG_ROOT: C:\cygwin64
-          CYG_SETUP: setup-x86_64.exe
-          CYG_MIRROR: http://cygwin.mirror.constant.com
-          CYG_CACHE: C:\cygwin64\var\cache\setup
-          CYG_BASH: C:\cygwin64\bin\bash
-          CC: gcc
-        - CYG_ROOT: C:\cygwin
-          CYG_SETUP: setup-x86.exe
-          CYG_MIRROR: http://cygwin.mirror.constant.com
-          CYG_CACHE: C:\cygwin\var\cache\setup
-          CYG_BASH: C:\cygwin\bin\bash
-          CC: gcc
-          TARGET: 32bit
-          TARGET_VARS: 32bit-vars
-
-# Cache Cygwin files to speed up build
-cache:
-    - '%CYG_CACHE%'
-clone_depth: 1
-
-# Attempt to ensure we don't try to convert line endings to Win32 CRLF as this will cause build to fail
-init:
-    - git config --global core.autocrlf input
-
-# Install needed build dependencies
-install:
-    - ps: 'Start-FileDownload "http://cygwin.com/$env:CYG_SETUP" -FileName "$env:CYG_SETUP"'
-    - '%CYG_SETUP% --quiet-mode --no-shortcuts --only-site --root "%CYG_ROOT%" --site "%CYG_MIRROR%" --local-package-dir "%CYG_CACHE%" --packages automake,bison,gcc-core,libtool,make,gettext-devel,gettext,intltool,pkg-config,clang,llvm > NUL 2>&1'
-    - '%CYG_BASH% -lc "cygcheck -dc cygwin"'
-
-build_script:
-    - 'echo building...'
-    - '%CYG_BASH% -lc "cd $APPVEYOR_BUILD_FOLDER; exec 0</dev/null; make LDFLAGS=$LDFLAGS CC=$CC $TARGET CFLAGS=$CFLAGS && make LDFLAGS=$LDFLAGS CC=$CC $TARGET_VARS hiredis-example"'

deps/hiredis/async.c

@@ -58,12 +58,11 @@
     } while(0);
 
 /* Forward declaration of function in hiredis.c */
-int __redisAppendCommand(redisContext *c, const char *cmd, size_t len);
+void __redisAppendCommand(redisContext *c, char *cmd, size_t len);
 
 /* Functions managing dictionary of callbacks for pub/sub. */
 static unsigned int callbackHash(const void *key) {
-    return dictGenHashFunction((const unsigned char *)key,
-                               sdslen((const sds)key));
+    return dictGenHashFunction((unsigned char*)key,sdslen((char*)key));
 }
 
 static void *callbackValDup(void *privdata, const void *src) {
@@ -77,8 +76,8 @@ static int callbackKeyCompare(void *privdata, const void *key1, const void *key2
     int l1, l2;
     ((void) privdata);
 
-    l1 = sdslen((const sds)key1);
-    l2 = sdslen((const sds)key2);
+    l1 = sdslen((sds)key1);
+    l2 = sdslen((sds)key2);
     if (l1 != l2) return 0;
     return memcmp(key1,key2,l1) == 0;
 }
@@ -103,12 +102,7 @@ static dictType callbackDict = {
 };
 
 static redisAsyncContext *redisAsyncInitialize(redisContext *c) {
-    redisAsyncContext *ac;
-
-    ac = realloc(c,sizeof(redisAsyncContext));
-    if (ac == NULL)
-        return NULL;
-
+    redisAsyncContext *ac = realloc(c,sizeof(redisAsyncContext));
     c = &(ac->c);
 
     /* The regular connect functions will always set the flag REDIS_CONNECTED.
@@ -142,62 +136,21 @@ static redisAsyncContext *redisAsyncInitialize(redisContext *c) {
 /* We want the error field to be accessible directly instead of requiring
  * an indirection to the redisContext struct. */
 static void __redisAsyncCopyError(redisAsyncContext *ac) {
-    if (!ac)
-        return;
-
     redisContext *c = &(ac->c);
     ac->err = c->err;
     ac->errstr = c->errstr;
 }
 
 redisAsyncContext *redisAsyncConnect(const char *ip, int port) {
-    redisContext *c;
-    redisAsyncContext *ac;
-
-    c = redisConnectNonBlock(ip,port);
-    if (c == NULL)
-        return NULL;
-
-    ac = redisAsyncInitialize(c);
-    if (ac == NULL) {
-        redisFree(c);
-        return NULL;
-    }
-
-    __redisAsyncCopyError(ac);
-    return ac;
-}
-
-redisAsyncContext *redisAsyncConnectBind(const char *ip, int port,
-                                         const char *source_addr) {
-    redisContext *c = redisConnectBindNonBlock(ip,port,source_addr);
-    redisAsyncContext *ac = redisAsyncInitialize(c);
-    __redisAsyncCopyError(ac);
-    return ac;
-}
-
-redisAsyncContext *redisAsyncConnectBindWithReuse(const char *ip, int port,
-                                                  const char *source_addr) {
-    redisContext *c = redisConnectBindNonBlockWithReuse(ip,port,source_addr);
+    redisContext *c = redisConnectNonBlock(ip,port);
     redisAsyncContext *ac = redisAsyncInitialize(c);
     __redisAsyncCopyError(ac);
     return ac;
 }
 
 redisAsyncContext *redisAsyncConnectUnix(const char *path) {
-    redisContext *c;
-    redisAsyncContext *ac;
-
-    c = redisConnectUnixNonBlock(path);
-    if (c == NULL)
-        return NULL;
-
-    ac = redisAsyncInitialize(c);
-    if (ac == NULL) {
-        redisFree(c);
-        return NULL;
-    }
-
+    redisContext *c = redisConnectUnixNonBlock(path);
+    redisAsyncContext *ac = redisAsyncInitialize(c);
     __redisAsyncCopyError(ac);
     return ac;
 }
@@ -229,9 +182,6 @@ static int __redisPushCallback(redisCallbackList *list, redisCallback *source) {
 
     /* Copy callback from stack to heap */
     cb = malloc(sizeof(*cb));
-    if (cb == NULL)
-        return REDIS_ERR_OOM;
-
     if (source != NULL) {
         memcpy(cb,source,sizeof(*cb));
         cb->next = NULL;
@@ -410,7 +360,7 @@ static int __redisGetSubscribeCallback(redisAsyncContext *ac, redisReply *reply,
 
 void redisProcessCallbacks(redisAsyncContext *ac) {
     redisContext *c = &(ac->c);
-    redisCallback cb = {NULL, NULL, NULL};
+    redisCallback cb;
     void *reply = NULL;
     int status;
 
@@ -418,12 +368,11 @@ void redisProcessCallbacks(redisAsyncContext *ac) {
         if (reply == NULL) {
             /* When the connection is being disconnected and there are
              * no more replies, this is the cue to really disconnect. */
-            if (c->flags & REDIS_DISCONNECTING && sdslen(c->obuf) == 0
-                && ac->replies.head == NULL) {
+            if (c->flags & REDIS_DISCONNECTING && sdslen(c->obuf) == 0) {
                 __redisAsyncDisconnect(ac);
                 return;
             }
-
+            
             /* If monitor mode, repush callback */
             if(c->flags & REDIS_MONITORING) {
                 __redisPushCallback(&ac->replies,&cb);
@@ -455,7 +404,6 @@ void redisProcessCallbacks(redisAsyncContext *ac) {
             if (((redisReply*)reply)->type == REDIS_REPLY_ERROR) {
                 c->err = REDIS_ERR_OTHER;
                 snprintf(c->errstr,sizeof(c->errstr),"%s",((redisReply*)reply)->str);
-                c->reader->fn->freeObject(reply);
                 __redisAsyncDisconnect(ac);
                 return;
             }
@@ -489,12 +437,12 @@ void redisProcessCallbacks(redisAsyncContext *ac) {
 }
 
 /* Internal helper function to detect socket status the first time a read or
- * write event fires. When connecting was not successful, the connect callback
+ * write event fires. When connecting was not succesful, the connect callback
  * is called with a REDIS_ERR status and the context is free'd. */
 static int __redisAsyncHandleConnect(redisAsyncContext *ac) {
     redisContext *c = &(ac->c);
 
-    if (redisCheckSocketError(c) == REDIS_ERR) {
+    if (redisCheckSocketError(c,c->fd) == REDIS_ERR) {
         /* Try again later when connect(2) is still in progress. */
         if (errno == EINPROGRESS)
             return REDIS_OK;
@@ -563,8 +511,8 @@ void redisAsyncHandleWrite(redisAsyncContext *ac) {
 
 /* Sets a pointer to the first argument and its length starting at p. Returns
  * the number of bytes to skip to get to the following argument. */
-static const char *nextArgument(const char *start, const char **str, size_t *len) {
-    const char *p = start;
+static char *nextArgument(char *start, char **str, size_t *len) {
+    char *p = start;
     if (p[0] != '$') {
         p = strchr(p,'$');
         if (p == NULL) return NULL;
@@ -580,15 +528,14 @@ static const char *nextArgument(const char *start, const char **str, size_t *len
 /* Helper function for the redisAsyncCommand* family of functions. Writes a
  * formatted command to the output buffer and registers the provided callback
  * function with the context. */
-static int __redisAsyncCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, const char *cmd, size_t len) {
+static int __redisAsyncCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, char *cmd, size_t len) {
     redisContext *c = &(ac->c);
     redisCallback cb;
     int pvariant, hasnext;
-    const char *cstr, *astr;
+    char *cstr, *astr;
     size_t clen, alen;
-    const char *p;
+    char *p;
     sds sname;
-    int ret;
 
     /* Don't accept new commands when the connection is about to be closed. */
     if (c->flags & (REDIS_DISCONNECTING | REDIS_FREEING)) return REDIS_ERR;
@@ -612,11 +559,9 @@ static int __redisAsyncCommand(redisAsyncContext *ac, redisCallbackFn *fn, void
         while ((p = nextArgument(p,&astr,&alen)) != NULL) {
             sname = sdsnewlen(astr,alen);
             if (pvariant)
-                ret = dictReplace(ac->sub.patterns,sname,&cb);
+                dictReplace(ac->sub.patterns,sname,&cb);
             else
-                ret = dictReplace(ac->sub.channels,sname,&cb);
-
-            if (ret == 0) sdsfree(sname);
+                dictReplace(ac->sub.channels,sname,&cb);
         }
     } else if (strncasecmp(cstr,"unsubscribe\r\n",13) == 0) {
         /* It is only useful to call (P)UNSUBSCRIBE when the context is
@@ -652,11 +597,6 @@ int redisvAsyncCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdat
     int len;
     int status;
     len = redisvFormatCommand(&cmd,format,ap);
-
-    /* We don't want to pass -1 or -2 to future functions as a length. */
-    if (len < 0)
-        return REDIS_ERR;
-
     status = __redisAsyncCommand(ac,fn,privdata,cmd,len);
     free(cmd);
     return status;
@@ -672,16 +612,11 @@ int redisAsyncCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata
 }
 
 int redisAsyncCommandArgv(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, int argc, const char **argv, const size_t *argvlen) {
-    sds cmd;
+    char *cmd;
     int len;
     int status;
-    len = redisFormatSdsCommandArgv(&cmd,argc,argv,argvlen);
+    len = redisFormatCommandArgv(&cmd,argc,argv,argvlen);
     status = __redisAsyncCommand(ac,fn,privdata,cmd,len);
-    sdsfree(cmd);
-    return status;
-}
-
-int redisAsyncFormattedCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, const char *cmd, size_t len) {
-    int status = __redisAsyncCommand(ac,fn,privdata,cmd,len);
+    free(cmd);
     return status;
 }

deps/hiredis/async.h

@@ -102,9 +102,6 @@ typedef struct redisAsyncContext {
 
 /* Functions that proxy to hiredis */
 redisAsyncContext *redisAsyncConnect(const char *ip, int port);
-redisAsyncContext *redisAsyncConnectBind(const char *ip, int port, const char *source_addr);
-redisAsyncContext *redisAsyncConnectBindWithReuse(const char *ip, int port,
-                                                  const char *source_addr);
 redisAsyncContext *redisAsyncConnectUnix(const char *path);
 int redisAsyncSetConnectCallback(redisAsyncContext *ac, redisConnectCallback *fn);
 int redisAsyncSetDisconnectCallback(redisAsyncContext *ac, redisDisconnectCallback *fn);
@@ -120,7 +117,6 @@ void redisAsyncHandleWrite(redisAsyncContext *ac);
 int redisvAsyncCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, const char *format, va_list ap);
 int redisAsyncCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, const char *format, ...);
 int redisAsyncCommandArgv(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, int argc, const char **argv, const size_t *argvlen);
-int redisAsyncFormattedCommand(redisAsyncContext *ac, redisCallbackFn *fn, void *privdata, const char *cmd, size_t len);
 
 #ifdef __cplusplus
 }

deps/hiredis/dict.c

@@ -161,7 +161,7 @@ static int dictReplace(dict *ht, void *key, void *val) {
     dictEntry *entry, auxentry;
 
     /* Try to add the element. If the key
-     * does not exists dictAdd will succeed. */
+     * does not exists dictAdd will suceed. */
     if (dictAdd(ht, key, val) == DICT_OK)
         return 1;
     /* It already exists, get the entry */
@@ -293,7 +293,7 @@ static void dictReleaseIterator(dictIterator *iter) {
 
 /* Expand the hash table if needed */
 static int _dictExpandIfNeeded(dict *ht) {
-    /* If the hash table is empty expand it to the initial size,
+    /* If the hash table is empty expand it to the intial size,
      * if the table is "full" dobule its size. */
     if (ht->size == 0)
         return dictExpand(ht, DICT_HT_INITIAL_SIZE);

deps/hiredis/example-ae.c

@@ -2,10 +2,9 @@
 #include <stdlib.h>
 #include <string.h>
 #include <signal.h>
-
-#include <hiredis.h>
-#include <async.h>
-#include <adapters/ae.h>
+#include "hiredis.h"
+#include "async.h"
+#include "adapters/ae.h"
 
 /* Put event loop in the global scope, so it can be explicitly stopped */
 static aeEventLoop *loop;
@@ -22,22 +21,17 @@ void getCallback(redisAsyncContext *c, void *r, void *privdata) {
 void connectCallback(const redisAsyncContext *c, int status) {
     if (status != REDIS_OK) {
         printf("Error: %s\n", c->errstr);
-        aeStop(loop);
         return;
     }
-
     printf("Connected...\n");
 }
 
 void disconnectCallback(const redisAsyncContext *c, int status) {
     if (status != REDIS_OK) {
         printf("Error: %s\n", c->errstr);
-        aeStop(loop);
         return;
     }
-
     printf("Disconnected...\n");
-    aeStop(loop);
 }
 
 int main (int argc, char **argv) {
@@ -50,7 +44,7 @@ int main (int argc, char **argv) {
         return 1;
     }
 
-    loop = aeCreateEventLoop(64);
+    loop = aeCreateEventLoop();
     redisAeAttach(loop, c);
     redisAsyncSetConnectCallback(c,connectCallback);
     redisAsyncSetDisconnectCallback(c,disconnectCallback);

deps/hiredis/example-libev.c

@@ -2,10 +2,9 @@
 #include <stdlib.h>
 #include <string.h>
 #include <signal.h>
-
-#include <hiredis.h>
-#include <async.h>
-#include <adapters/libev.h>
+#include "hiredis.h"
+#include "async.h"
+#include "adapters/libev.h"
 
 void getCallback(redisAsyncContext *c, void *r, void *privdata) {
     redisReply *reply = r;

deps/hiredis/example-libevent.c

@@ -2,10 +2,9 @@
 #include <stdlib.h>
 #include <string.h>
 #include <signal.h>
-
-#include <hiredis.h>
-#include <async.h>
-#include <adapters/libevent.h>
+#include "hiredis.h"
+#include "async.h"
+#include "adapters/libevent.h"
 
 void getCallback(redisAsyncContext *c, void *r, void *privdata) {
     redisReply *reply = r;

deps/hiredis/example.c

@@ -2,24 +2,17 @@
 #include <stdlib.h>
 #include <string.h>
 
-#include <hiredis.h>
+#include "hiredis.h"
 
-int main(int argc, char **argv) {
+int main(void) {
     unsigned int j;
     redisContext *c;
     redisReply *reply;
-    const char *hostname = (argc > 1) ? argv[1] : "127.0.0.1";
-    int port = (argc > 2) ? atoi(argv[2]) : 6379;
 
     struct timeval timeout = { 1, 500000 }; // 1.5 seconds
-    c = redisConnectWithTimeout(hostname, port, timeout);
-    if (c == NULL || c->err) {
-        if (c) {
-            printf("Connection error: %s\n", c->errstr);
-            redisFree(c);
-        } else {
-            printf("Connection error: can't allocate redis context\n");
-        }
+    c = redisConnectWithTimeout((char*)"127.0.0.2", 6379, timeout);
+    if (c->err) {
+        printf("Connection error: %s\n", c->errstr);
         exit(1);
     }
 
@@ -34,7 +27,7 @@ int main(int argc, char **argv) {
     freeReplyObject(reply);
 
     /* Set a key using binary safe API */
-    reply = redisCommand(c,"SET %b %b", "bar", (size_t) 3, "hello", (size_t) 5);
+    reply = redisCommand(c,"SET %b %b", "bar", 3, "hello", 5);
     printf("SET (binary API): %s\n", reply->str);
     freeReplyObject(reply);
 
@@ -57,7 +50,7 @@ int main(int argc, char **argv) {
     for (j = 0; j < 10; j++) {
         char buf[64];
 
-        snprintf(buf,64,"%u",j);
+        snprintf(buf,64,"%d",j);
         reply = redisCommand(c,"LPUSH mylist element-%s", buf);
         freeReplyObject(reply);
     }
@@ -71,8 +64,5 @@ int main(int argc, char **argv) {
     }
     freeReplyObject(reply);
 
-    /* Disconnects and frees the context */
-    redisFree(c);
-
     return 0;
 }

deps/hiredis/examples/example-glib.c

@@ -1,73 +0,0 @@
-#include <stdlib.h>
-
-#include <hiredis.h>
-#include <async.h>
-#include <adapters/glib.h>
-
-static GMainLoop *mainloop;
-
-static void
-connect_cb (const redisAsyncContext *ac G_GNUC_UNUSED,
-            int status)
-{
-    if (status != REDIS_OK) {
-        g_printerr("Failed to connect: %s\n", ac->errstr);
-        g_main_loop_quit(mainloop);
-    } else {
-        g_printerr("Connected...\n");
-    }
-}
-
-static void
-disconnect_cb (const redisAsyncContext *ac G_GNUC_UNUSED,
-               int status)
-{
-    if (status != REDIS_OK) {
-        g_error("Failed to disconnect: %s", ac->errstr);
-    } else {
-        g_printerr("Disconnected...\n");
-        g_main_loop_quit(mainloop);
-    }
-}
-
-static void
-command_cb(redisAsyncContext *ac,
-           gpointer r,
-           gpointer user_data G_GNUC_UNUSED)
-{
-    redisReply *reply = r;
-
-    if (reply) {
-        g_print("REPLY: %s\n", reply->str);
-    }
-
-    redisAsyncDisconnect(ac);
-}
-
-gint
-main (gint argc     G_GNUC_UNUSED,
-      gchar *argv[] G_GNUC_UNUSED)
-{
-    redisAsyncContext *ac;
-    GMainContext *context = NULL;
-    GSource *source;
-
-    ac = redisAsyncConnect("127.0.0.1", 6379);
-    if (ac->err) {
-        g_printerr("%s\n", ac->errstr);
-        exit(EXIT_FAILURE);
-    }
-
-    source = redis_source_new(ac);
-    mainloop = g_main_loop_new(context, FALSE);
-    g_source_attach(source, context);
-
-    redisAsyncSetConnectCallback(ac, connect_cb);
-    redisAsyncSetDisconnectCallback(ac, disconnect_cb);
-    redisAsyncCommand(ac, command_cb, NULL, "SET key 1234");
-    redisAsyncCommand(ac, command_cb, NULL, "GET key");
-
-    g_main_loop_run(mainloop);
-
-    return EXIT_SUCCESS;
-}

deps/hiredis/examples/example-ivykis.c

@@ -1,58 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <signal.h>
-
-#include <hiredis.h>
-#include <async.h>
-#include <adapters/ivykis.h>
-
-void getCallback(redisAsyncContext *c, void *r, void *privdata) {
-    redisReply *reply = r;
-    if (reply == NULL) return;
-    printf("argv[%s]: %s\n", (char*)privdata, reply->str);
-
-    /* Disconnect after receiving the reply to GET */
-    redisAsyncDisconnect(c);
-}
-
-void connectCallback(const redisAsyncContext *c, int status) {
-    if (status != REDIS_OK) {
-        printf("Error: %s\n", c->errstr);
-        return;
-    }
-    printf("Connected...\n");
-}
-
-void disconnectCallback(const redisAsyncContext *c, int status) {
-    if (status != REDIS_OK) {
-        printf("Error: %s\n", c->errstr);
-        return;
-    }
-    printf("Disconnected...\n");
-}
-
-int main (int argc, char **argv) {
-    signal(SIGPIPE, SIG_IGN);
-
-    iv_init();
-
-    redisAsyncContext *c = redisAsyncConnect("127.0.0.1", 6379);
-    if (c->err) {
-        /* Let *c leak for now... */
-        printf("Error: %s\n", c->errstr);
-        return 1;
-    }
-
-    redisIvykisAttach(c);
-    redisAsyncSetConnectCallback(c,connectCallback);
-    redisAsyncSetDisconnectCallback(c,disconnectCallback);
-    redisAsyncCommand(c, NULL, NULL, "SET key %b", argv[argc-1], strlen(argv[argc-1]));
-    redisAsyncCommand(c, getCallback, (char*)"end-1", "GET key");
-
-    iv_main();
-
-    iv_deinit();
-
-    return 0;
-}

deps/hiredis/examples/example-libuv.c

@@ -1,53 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <signal.h>
-
-#include <hiredis.h>
-#include <async.h>
-#include <adapters/libuv.h>
-
-void getCallback(redisAsyncContext *c, void *r, void *privdata) {
-    redisReply *reply = r;
-    if (reply == NULL) return;
-    printf("argv[%s]: %s\n", (char*)privdata, reply->str);
-
-    /* Disconnect after receiving the reply to GET */
-    redisAsyncDisconnect(c);
-}
-
-void connectCallback(const redisAsyncContext *c, int status) {
-    if (status != REDIS_OK) {
-        printf("Error: %s\n", c->errstr);
-        return;
-    }
-    printf("Connected...\n");
-}
-
-void disconnectCallback(const redisAsyncContext *c, int status) {
-    if (status != REDIS_OK) {
-        printf("Error: %s\n", c->errstr);
-        return;
-    }
-    printf("Disconnected...\n");
-}
-
-int main (int argc, char **argv) {
-    signal(SIGPIPE, SIG_IGN);
-    uv_loop_t* loop = uv_default_loop();
-
-    redisAsyncContext *c = redisAsyncConnect("127.0.0.1", 6379);
-    if (c->err) {
-        /* Let *c leak for now... */
-        printf("Error: %s\n", c->errstr);
-        return 1;
-    }
-
-    redisLibuvAttach(c,loop);
-    redisAsyncSetConnectCallback(c,connectCallback);
-    redisAsyncSetDisconnectCallback(c,disconnectCallback);
-    redisAsyncCommand(c, NULL, NULL, "SET key %b", argv[argc-1], strlen(argv[argc-1]));
-    redisAsyncCommand(c, getCallback, (char*)"end-1", "GET key");
-    uv_run(loop, UV_RUN_DEFAULT);
-    return 0;
-}

deps/hiredis/examples/example-macosx.c

@@ -1,66 +0,0 @@
-//
-//  Created by Дмитрий Бахвалов on 13.07.15.
-//  Copyright (c) 2015 Dmitry Bakhvalov. All rights reserved.
-//
-
-#include <stdio.h>
-
-#include <hiredis.h>
-#include <async.h>
-#include <adapters/macosx.h>
-
-void getCallback(redisAsyncContext *c, void *r, void *privdata) {
-    redisReply *reply = r;
-    if (reply == NULL) return;
-    printf("argv[%s]: %s\n", (char*)privdata, reply->str);
-
-    /* Disconnect after receiving the reply to GET */
-    redisAsyncDisconnect(c);
-}
-
-void connectCallback(const redisAsyncContext *c, int status) {
-    if (status != REDIS_OK) {
-        printf("Error: %s\n", c->errstr);
-        return;
-    }
-    printf("Connected...\n");
-}
-
-void disconnectCallback(const redisAsyncContext *c, int status) {
-    if (status != REDIS_OK) {
-        printf("Error: %s\n", c->errstr);
-        return;
-    }
-    CFRunLoopStop(CFRunLoopGetCurrent());
-    printf("Disconnected...\n");
-}
-
-int main (int argc, char **argv) {
-    signal(SIGPIPE, SIG_IGN);
-
-    CFRunLoopRef loop = CFRunLoopGetCurrent();
-    if( !loop ) {
-        printf("Error: Cannot get current run loop\n");
-        return 1;
-    }
-
-    redisAsyncContext *c = redisAsyncConnect("127.0.0.1", 6379);
-    if (c->err) {
-        /* Let *c leak for now... */
-        printf("Error: %s\n", c->errstr);
-        return 1;
-    }
-
-    redisMacOSAttach(c, loop);
-
-    redisAsyncSetConnectCallback(c,connectCallback);
-    redisAsyncSetDisconnectCallback(c,disconnectCallback);
-
-    redisAsyncCommand(c, NULL, NULL, "SET key %b", argv[argc-1], strlen(argv[argc-1]));
-    redisAsyncCommand(c, getCallback, (char*)"end-1", "GET key");
-
-    CFRunLoopRun();
-
-    return 0;
-}
-

deps/hiredis/examples/example-qt.cpp

@@ -1,46 +0,0 @@
-#include <iostream>
-using namespace std;
-
-#include <QCoreApplication>
-#include <QTimer>
-
-#include "example-qt.h"
-
-void getCallback(redisAsyncContext *, void * r, void * privdata) {
-
-    redisReply * reply = static_cast<redisReply *>(r);
-    ExampleQt * ex = static_cast<ExampleQt *>(privdata);
-    if (reply == nullptr || ex == nullptr) return;
-
-    cout << "key: " << reply->str << endl;
-
-    ex->finish();
-}
-
-void ExampleQt::run() {
-
-    m_ctx = redisAsyncConnect("localhost", 6379);
-
-    if (m_ctx->err) {
-        cerr << "Error: " << m_ctx->errstr << endl;
-        redisAsyncFree(m_ctx);
-        emit finished();
-    }
-
-    m_adapter.setContext(m_ctx);
-
-    redisAsyncCommand(m_ctx, NULL, NULL, "SET key %s", m_value);
-    redisAsyncCommand(m_ctx, getCallback, this, "GET key");
-}
-
-int main (int argc, char **argv) {
-
-    QCoreApplication app(argc, argv);
-
-    ExampleQt example(argv[argc-1]);
-
-    QObject::connect(&example, SIGNAL(finished()), &app, SLOT(quit()));
-    QTimer::singleShot(0, &example, SLOT(run()));
-
-    return app.exec();
-}

deps/hiredis/examples/example-qt.h

@@ -1,32 +0,0 @@
-#ifndef __HIREDIS_EXAMPLE_QT_H
-#define __HIREDIS_EXAMPLE_QT_H
-
-#include <adapters/qt.h>
-
-class ExampleQt : public QObject {
-
-    Q_OBJECT
-
-    public:
-        ExampleQt(const char * value, QObject * parent = 0)
-            : QObject(parent), m_value(value) {}
-
-    signals:
-        void finished();
-
-    public slots:
-        void run();
-
-    private:
-        void finish() { emit finished(); }
-
-    private:
-        const char * m_value;
-        redisAsyncContext * m_ctx;
-        RedisQtAdapter m_adapter;
-
-    friend
-    void getCallback(redisAsyncContext *, void *, void *);
-};
-
-#endif /* !__HIREDIS_EXAMPLE_QT_H */

deps/hiredis/fmacros.h

@@ -1,25 +1,16 @@
 #ifndef __HIREDIS_FMACRO_H
 #define __HIREDIS_FMACRO_H
 
-#if defined(__linux__)
+#if !defined(_BSD_SOURCE)
 #define _BSD_SOURCE
-#define _DEFAULT_SOURCE
-#endif
-
-#if defined(__CYGWIN__)
-#include <sys/cdefs.h>
 #endif
 
 #if defined(__sun__)
 #define _POSIX_C_SOURCE 200112L
-#else
-#if !(defined(__APPLE__) && defined(__MACH__)) && !(defined(__FreeBSD__))
+#elif defined(__linux__) || defined(__OpenBSD__) || defined(__NetBSD__)
 #define _XOPEN_SOURCE 600
-#endif
-#endif
-
-#if defined(__APPLE__) && defined(__MACH__)
-#define _OSX
+#else
+#define _XOPEN_SOURCE
 #endif
 
 #endif

deps/hiredis/hiredis.h

@@ -1,8 +1,6 @@
 /*
  * Copyright (c) 2009-2011, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2010-2014, Pieter Noordhuis <pcnoordhuis at gmail dot com>
- * Copyright (c) 2015, Matt Stancliff <matt at genges dot com>,
- *                     Jan-Erik Rediger <janerik at fnordig dot com>
+ * Copyright (c) 2010-2011, Pieter Noordhuis <pcnoordhuis at gmail dot com>
  *
  * All rights reserved.
  *
@@ -33,16 +31,26 @@
 
 #ifndef __HIREDIS_H
 #define __HIREDIS_H
-#include "read.h"
+#include <stdio.h> /* for size_t */
 #include <stdarg.h> /* for va_list */
 #include <sys/time.h> /* for struct timeval */
-#include <stdint.h> /* uintXX_t, etc */
-#include "sds.h" /* for sds */
 
 #define HIREDIS_MAJOR 0
-#define HIREDIS_MINOR 13
-#define HIREDIS_PATCH 3
-#define HIREDIS_SONAME 0.13
+#define HIREDIS_MINOR 10
+#define HIREDIS_PATCH 1
+
+#define REDIS_ERR -1
+#define REDIS_OK 0
+
+/* When an error occurs, the err flag in a context is set to hold the type of
+ * error that occured. REDIS_ERR_IO means there was an I/O error and you
+ * should use the "errno" variable to find out what is wrong.
+ * For other values, the "errstr" field will hold a description. */
+#define REDIS_ERR_IO 1 /* Error in read or write */
+#define REDIS_ERR_EOF 3 /* End of file */
+#define REDIS_ERR_PROTOCOL 4 /* Protocol error */
+#define REDIS_ERR_OOM 5 /* Out of memory */
+#define REDIS_ERR_OTHER 2 /* Everything else... */
 
 /* Connection type can be blocking or non-blocking and is set in the
  * least significant bit of the flags field in redisContext. */
@@ -71,38 +79,14 @@
 /* Flag that is set when monitor mode is active */
 #define REDIS_MONITORING 0x40
 
-/* Flag that is set when we should set SO_REUSEADDR before calling bind() */
-#define REDIS_REUSEADDR 0x80
+#define REDIS_REPLY_STRING 1
+#define REDIS_REPLY_ARRAY 2
+#define REDIS_REPLY_INTEGER 3
+#define REDIS_REPLY_NIL 4
+#define REDIS_REPLY_STATUS 5
+#define REDIS_REPLY_ERROR 6
 
-#define REDIS_KEEPALIVE_INTERVAL 15 /* seconds */
-
-/* number of times we retry to connect in the case of EADDRNOTAVAIL and
- * SO_REUSEADDR is being used. */
-#define REDIS_CONNECT_RETRIES  10
-
-/* strerror_r has two completely different prototypes and behaviors
- * depending on system issues, so we need to operate on the error buffer
- * differently depending on which strerror_r we're using. */
-#ifndef _GNU_SOURCE
-/* "regular" POSIX strerror_r that does the right thing. */
-#define __redis_strerror_r(errno, buf, len)                                    \
-    do {                                                                       \
-        strerror_r((errno), (buf), (len));                                     \
-    } while (0)
-#else
-/* "bad" GNU strerror_r we need to clean up after. */
-#define __redis_strerror_r(errno, buf, len)                                    \
-    do {                                                                       \
-        char *err_str = strerror_r((errno), (buf), (len));                     \
-        /* If return value _isn't_ the start of the buffer we passed in,       \
-         * then GNU strerror_r returned an internal static buffer and we       \
-         * need to copy the result into our private buffer. */                 \
-        if (err_str != (buf)) {                                                \
-            strncpy((buf), err_str, ((len) - 1));                              \
-            buf[(len)-1] = '\0';                                               \
-        }                                                                      \
-    } while (0)
-#endif
+#define REDIS_READER_MAX_BUF (1024*16)  /* Default max unused reader buffer. */
 
 #ifdef __cplusplus
 extern "C" {
@@ -112,13 +96,61 @@ extern "C" {
 typedef struct redisReply {
     int type; /* REDIS_REPLY_* */
     long long integer; /* The integer when type is REDIS_REPLY_INTEGER */
-    size_t len; /* Length of string */
+    int len; /* Length of string */
     char *str; /* Used for both REDIS_REPLY_ERROR and REDIS_REPLY_STRING */
     size_t elements; /* number of elements, for REDIS_REPLY_ARRAY */
     struct redisReply **element; /* elements vector for REDIS_REPLY_ARRAY */
 } redisReply;
 
+typedef struct redisReadTask {
+    int type;
+    int elements; /* number of elements in multibulk container */
+    int idx; /* index in parent (array) object */
+    void *obj; /* holds user-generated value for a read task */
+    struct redisReadTask *parent; /* parent task */
+    void *privdata; /* user-settable arbitrary field */
+} redisReadTask;
+
+typedef struct redisReplyObjectFunctions {
+    void *(*createString)(const redisReadTask*, char*, size_t);
+    void *(*createArray)(const redisReadTask*, int);
+    void *(*createInteger)(const redisReadTask*, long long);
+    void *(*createNil)(const redisReadTask*);
+    void (*freeObject)(void*);
+} redisReplyObjectFunctions;
+
+/* State for the protocol parser */
+typedef struct redisReader {
+    int err; /* Error flags, 0 when there is no error */
+    char errstr[128]; /* String representation of error when applicable */
+
+    char *buf; /* Read buffer */
+    size_t pos; /* Buffer cursor */
+    size_t len; /* Buffer length */
+    size_t maxbuf; /* Max length of unused buffer */
+
+    redisReadTask rstack[9];
+    int ridx; /* Index of current read task */
+    void *reply; /* Temporary reply pointer */
+
+    redisReplyObjectFunctions *fn;
+    void *privdata;
+} redisReader;
+
+/* Public API for the protocol parser. */
 redisReader *redisReaderCreate(void);
+void redisReaderFree(redisReader *r);
+int redisReaderFeed(redisReader *r, const char *buf, size_t len);
+int redisReaderGetReply(redisReader *r, void **reply);
+
+/* Backwards compatibility, can be removed on big version bump. */
+#define redisReplyReaderCreate redisReaderCreate
+#define redisReplyReaderFree redisReaderFree
+#define redisReplyReaderFeed redisReaderFeed
+#define redisReplyReaderGetReply redisReaderGetReply
+#define redisReplyReaderSetPrivdata(_r, _p) (int)(((redisReader*)(_r))->privdata = (_p))
+#define redisReplyReaderGetObject(_r) (((redisReader*)(_r))->reply)
+#define redisReplyReaderGetError(_r) (((redisReader*)(_r))->errstr)
 
 /* Function to free the reply objects hiredis returns by default. */
 void freeReplyObject(void *reply);
@@ -127,14 +159,6 @@ void freeReplyObject(void *reply);
 int redisvFormatCommand(char **target, const char *format, va_list ap);
 int redisFormatCommand(char **target, const char *format, ...);
 int redisFormatCommandArgv(char **target, int argc, const char **argv, const size_t *argvlen);
-int redisFormatSdsCommandArgv(sds *target, int argc, const char ** argv, const size_t *argvlen);
-void redisFreeCommand(char *cmd);
-void redisFreeSdsCommand(sds cmd);
-
-enum redisConnectionType {
-    REDIS_CONN_TCP,
-    REDIS_CONN_UNIX
-};
 
 /* Context for a connection to Redis */
 typedef struct redisContext {
@@ -144,49 +168,16 @@ typedef struct redisContext {
     int flags;
     char *obuf; /* Write buffer */
     redisReader *reader; /* Protocol reader */
-
-    enum redisConnectionType connection_type;
-    struct timeval *timeout;
-
-    struct {
-        char *host;
-        char *source_addr;
-        int port;
-    } tcp;
-
-    struct {
-        char *path;
-    } unix_sock;
-
 } redisContext;
 
 redisContext *redisConnect(const char *ip, int port);
-redisContext *redisConnectWithTimeout(const char *ip, int port, const struct timeval tv);
+redisContext *redisConnectWithTimeout(const char *ip, int port, struct timeval tv);
 redisContext *redisConnectNonBlock(const char *ip, int port);
-redisContext *redisConnectBindNonBlock(const char *ip, int port,
-                                       const char *source_addr);
-redisContext *redisConnectBindNonBlockWithReuse(const char *ip, int port,
-                                                const char *source_addr);
 redisContext *redisConnectUnix(const char *path);
-redisContext *redisConnectUnixWithTimeout(const char *path, const struct timeval tv);
+redisContext *redisConnectUnixWithTimeout(const char *path, struct timeval tv);
 redisContext *redisConnectUnixNonBlock(const char *path);
-redisContext *redisConnectFd(int fd);
-
-/**
- * Reconnect the given context using the saved information.
- *
- * This re-uses the exact same connect options as in the initial connection.
- * host, ip (or path), timeout and bind address are reused,
- * flags are used unmodified from the existing context.
- *
- * Returns REDIS_OK on successful connect or REDIS_ERR otherwise.
- */
-int redisReconnect(redisContext *c);
-
-int redisSetTimeout(redisContext *c, const struct timeval tv);
-int redisEnableKeepAlive(redisContext *c);
+int redisSetTimeout(redisContext *c, struct timeval tv);
 void redisFree(redisContext *c);
-int redisFreeKeepFd(redisContext *c);
 int redisBufferRead(redisContext *c);
 int redisBufferWrite(redisContext *c, int *done);
 
@@ -197,10 +188,6 @@ int redisBufferWrite(redisContext *c, int *done);
 int redisGetReply(redisContext *c, void **reply);
 int redisGetReplyFromReader(redisContext *c, void **reply);
 
-/* Write a formatted command to the output buffer. Use these functions in blocking mode
- * to get a pipeline of commands. */
-int redisAppendFormattedCommand(redisContext *c, const char *cmd, size_t len);
-
 /* Write a command to the output buffer. Use these functions in blocking mode
  * to get a pipeline of commands. */
 int redisvAppendCommand(redisContext *c, const char *format, va_list ap);

deps/hiredis/net.c

@@ -1,9 +1,7 @@
 /* Extracted from anet.c to work properly with Hiredis error reporting.
  *
- * Copyright (c) 2009-2011, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2010-2014, Pieter Noordhuis <pcnoordhuis at gmail dot com>
- * Copyright (c) 2015, Matt Stancliff <matt at genges dot com>,
- *                     Jan-Erik Rediger <janerik at fnordig dot com>
+ * Copyright (c) 2006-2011, Salvatore Sanfilippo <antirez at gmail dot com>
+ * Copyright (c) 2010-2011, Pieter Noordhuis <pcnoordhuis at gmail dot com>
  *
  * All rights reserved.
  *
@@ -49,7 +47,6 @@
 #include <stdio.h>
 #include <poll.h>
 #include <limits.h>
-#include <stdlib.h>
 
 #include "net.h"
 #include "sds.h"
@@ -57,28 +54,21 @@
 /* Defined in hiredis.c */
 void __redisSetError(redisContext *c, int type, const char *str);
 
-static void redisContextCloseFd(redisContext *c) {
-    if (c && c->fd >= 0) {
-        close(c->fd);
-        c->fd = -1;
-    }
-}
-
 static void __redisSetErrorFromErrno(redisContext *c, int type, const char *prefix) {
-    char buf[128] = { 0 };
+    char buf[128];
     size_t len = 0;
 
     if (prefix != NULL)
         len = snprintf(buf,sizeof(buf),"%s: ",prefix);
-    __redis_strerror_r(errno, (char *)(buf + len), sizeof(buf) - len);
+    strerror_r(errno,buf+len,sizeof(buf)-len);
     __redisSetError(c,type,buf);
 }
 
-static int redisSetReuseAddr(redisContext *c) {
+static int redisSetReuseAddr(redisContext *c, int fd) {
     int on = 1;
-    if (setsockopt(c->fd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) == -1) {
+    if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) == -1) {
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,NULL);
-        redisContextCloseFd(c);
+        close(fd);
         return REDIS_ERR;
     }
     return REDIS_OK;
@@ -90,24 +80,23 @@ static int redisCreateSocket(redisContext *c, int type) {
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,NULL);
         return REDIS_ERR;
     }
-    c->fd = s;
     if (type == AF_INET) {
-        if (redisSetReuseAddr(c) == REDIS_ERR) {
+        if (redisSetReuseAddr(c,s) == REDIS_ERR) {
             return REDIS_ERR;
         }
     }
-    return REDIS_OK;
+    return s;
 }
 
-static int redisSetBlocking(redisContext *c, int blocking) {
+static int redisSetBlocking(redisContext *c, int fd, int blocking) {
     int flags;
 
     /* Set the socket nonblocking.
      * Note that fcntl(2) for F_GETFL and F_SETFL can't be
      * interrupted by a signal. */
-    if ((flags = fcntl(c->fd, F_GETFL)) == -1) {
+    if ((flags = fcntl(fd, F_GETFL)) == -1) {
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,"fcntl(F_GETFL)");
-        redisContextCloseFd(c);
+        close(fd);
         return REDIS_ERR;
     }
 
@@ -116,61 +105,19 @@ static int redisSetBlocking(redisContext *c, int blocking) {
     else
         flags |= O_NONBLOCK;
 
-    if (fcntl(c->fd, F_SETFL, flags) == -1) {
+    if (fcntl(fd, F_SETFL, flags) == -1) {
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,"fcntl(F_SETFL)");
-        redisContextCloseFd(c);
+        close(fd);
         return REDIS_ERR;
     }
     return REDIS_OK;
 }
 
-int redisKeepAlive(redisContext *c, int interval) {
-    int val = 1;
-    int fd = c->fd;
-
-    if (setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val)) == -1){
-        __redisSetError(c,REDIS_ERR_OTHER,strerror(errno));
-        return REDIS_ERR;
-    }
-
-    val = interval;
-
-#ifdef _OSX
-    if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPALIVE, &val, sizeof(val)) < 0) {
-        __redisSetError(c,REDIS_ERR_OTHER,strerror(errno));
-        return REDIS_ERR;
-    }
-#else
-#if defined(__GLIBC__) && !defined(__FreeBSD_kernel__)
-    val = interval;
-    if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPIDLE, &val, sizeof(val)) < 0) {
-        __redisSetError(c,REDIS_ERR_OTHER,strerror(errno));
-        return REDIS_ERR;
-    }
-
-    val = interval/3;
-    if (val == 0) val = 1;
-    if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPINTVL, &val, sizeof(val)) < 0) {
-        __redisSetError(c,REDIS_ERR_OTHER,strerror(errno));
-        return REDIS_ERR;
-    }
-
-    val = 3;
-    if (setsockopt(fd, IPPROTO_TCP, TCP_KEEPCNT, &val, sizeof(val)) < 0) {
-        __redisSetError(c,REDIS_ERR_OTHER,strerror(errno));
-        return REDIS_ERR;
-    }
-#endif
-#endif
-
-    return REDIS_OK;
-}
-
-static int redisSetTcpNoDelay(redisContext *c) {
+static int redisSetTcpNoDelay(redisContext *c, int fd) {
     int yes = 1;
-    if (setsockopt(c->fd, IPPROTO_TCP, TCP_NODELAY, &yes, sizeof(yes)) == -1) {
+    if (setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &yes, sizeof(yes)) == -1) {
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,"setsockopt(TCP_NODELAY)");
-        redisContextCloseFd(c);
+        close(fd);
         return REDIS_ERR;
     }
     return REDIS_OK;
@@ -178,15 +125,18 @@ static int redisSetTcpNoDelay(redisContext *c) {
 
 #define __MAX_MSEC (((LONG_MAX) - 999) / 1000)
 
-static int redisContextTimeoutMsec(redisContext *c, long *result)
-{
-    const struct timeval *timeout = c->timeout;
-    long msec = -1;
+static int redisContextWaitReady(redisContext *c, int fd, const struct timeval *timeout) {
+    struct pollfd   wfd[1];
+    long msec;
+
+    msec          = -1;
+    wfd[0].fd     = fd;
+    wfd[0].events = POLLOUT;
 
     /* Only use timeout when not NULL. */
     if (timeout != NULL) {
         if (timeout->tv_usec > 1000000 || timeout->tv_sec > __MAX_MSEC) {
-            *result = msec;
+            close(fd);
             return REDIS_ERR;
         }
 
@@ -197,60 +147,52 @@ static int redisContextTimeoutMsec(redisContext *c, long *result)
         }
     }
 
-    *result = msec;
-    return REDIS_OK;
-}
-
-static int redisContextWaitReady(redisContext *c, long msec) {
-    struct pollfd   wfd[1];
-
-    wfd[0].fd     = c->fd;
-    wfd[0].events = POLLOUT;
-
     if (errno == EINPROGRESS) {
         int res;
 
         if ((res = poll(wfd, 1, msec)) == -1) {
             __redisSetErrorFromErrno(c, REDIS_ERR_IO, "poll(2)");
-            redisContextCloseFd(c);
+            close(fd);
             return REDIS_ERR;
         } else if (res == 0) {
             errno = ETIMEDOUT;
             __redisSetErrorFromErrno(c,REDIS_ERR_IO,NULL);
-            redisContextCloseFd(c);
+            close(fd);
             return REDIS_ERR;
         }
 
-        if (redisCheckSocketError(c) != REDIS_OK)
+        if (redisCheckSocketError(c, fd) != REDIS_OK)
             return REDIS_ERR;
 
         return REDIS_OK;
     }
 
     __redisSetErrorFromErrno(c,REDIS_ERR_IO,NULL);
-    redisContextCloseFd(c);
+    close(fd);
     return REDIS_ERR;
 }
 
-int redisCheckSocketError(redisContext *c) {
+int redisCheckSocketError(redisContext *c, int fd) {
     int err = 0;
     socklen_t errlen = sizeof(err);
 
-    if (getsockopt(c->fd, SOL_SOCKET, SO_ERROR, &err, &errlen) == -1) {
+    if (getsockopt(fd, SOL_SOCKET, SO_ERROR, &err, &errlen) == -1) {
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,"getsockopt(SO_ERROR)");
+        close(fd);
         return REDIS_ERR;
     }
 
     if (err) {
         errno = err;
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,NULL);
+        close(fd);
         return REDIS_ERR;
     }
 
     return REDIS_OK;
 }
 
-int redisContextSetTimeout(redisContext *c, const struct timeval tv) {
+int redisContextSetTimeout(redisContext *c, struct timeval tv) {
     if (setsockopt(c->fd,SOL_SOCKET,SO_RCVTIMEO,&tv,sizeof(tv)) == -1) {
         __redisSetErrorFromErrno(c,REDIS_ERR_IO,"setsockopt(SO_RCVTIMEO)");
         return REDIS_ERR;
@@ -262,141 +204,44 @@ int redisContextSetTimeout(redisContext *c, const struct timeval tv) {
     return REDIS_OK;
 }
 
-static int _redisContextConnectTcp(redisContext *c, const char *addr, int port,
-                                   const struct timeval *timeout,
-                                   const char *source_addr) {
-    int s, rv, n;
+int redisContextConnectTcp(redisContext *c, const char *addr, int port, struct timeval *timeout) {
+    int s, rv;
     char _port[6];  /* strlen("65535"); */
-    struct addrinfo hints, *servinfo, *bservinfo, *p, *b;
+    struct addrinfo hints, *servinfo, *p;
     int blocking = (c->flags & REDIS_BLOCK);
-    int reuseaddr = (c->flags & REDIS_REUSEADDR);
-    int reuses = 0;
-    long timeout_msec = -1;
-
-    servinfo = NULL;
-    c->connection_type = REDIS_CONN_TCP;
-    c->tcp.port = port;
-
-    /* We need to take possession of the passed parameters
-     * to make them reusable for a reconnect.
-     * We also carefully check we don't free data we already own,
-     * as in the case of the reconnect method.
-     *
-     * This is a bit ugly, but atleast it works and doesn't leak memory.
-     **/
-    if (c->tcp.host != addr) {
-        if (c->tcp.host)
-            free(c->tcp.host);
-
-        c->tcp.host = strdup(addr);
-    }
-
-    if (timeout) {
-        if (c->timeout != timeout) {
-            if (c->timeout == NULL)
-                c->timeout = malloc(sizeof(struct timeval));
-
-            memcpy(c->timeout, timeout, sizeof(struct timeval));
-        }
-    } else {
-        if (c->timeout)
-            free(c->timeout);
-        c->timeout = NULL;
-    }
-
-    if (redisContextTimeoutMsec(c, &timeout_msec) != REDIS_OK) {
-        __redisSetError(c, REDIS_ERR_IO, "Invalid timeout specified");
-        goto error;
-    }
-
-    if (source_addr == NULL) {
-        free(c->tcp.source_addr);
-        c->tcp.source_addr = NULL;
-    } else if (c->tcp.source_addr != source_addr) {
-        free(c->tcp.source_addr);
-        c->tcp.source_addr = strdup(source_addr);
-    }
 
     snprintf(_port, 6, "%d", port);
     memset(&hints,0,sizeof(hints));
     hints.ai_family = AF_INET;
     hints.ai_socktype = SOCK_STREAM;
 
-    /* Try with IPv6 if no IPv4 address was found. We do it in this order since
-     * in a Redis client you can't afford to test if you have IPv6 connectivity
-     * as this would add latency to every connect. Otherwise a more sensible
-     * route could be: Use IPv6 if both addresses are available and there is IPv6
-     * connectivity. */
-    if ((rv = getaddrinfo(c->tcp.host,_port,&hints,&servinfo)) != 0) {
-         hints.ai_family = AF_INET6;
-         if ((rv = getaddrinfo(addr,_port,&hints,&servinfo)) != 0) {
-            __redisSetError(c,REDIS_ERR_OTHER,gai_strerror(rv));
-            return REDIS_ERR;
-        }
+    if ((rv = getaddrinfo(addr,_port,&hints,&servinfo)) != 0) {
+        __redisSetError(c,REDIS_ERR_OTHER,gai_strerror(rv));
+        return REDIS_ERR;
     }
     for (p = servinfo; p != NULL; p = p->ai_next) {
-addrretry:
         if ((s = socket(p->ai_family,p->ai_socktype,p->ai_protocol)) == -1)
             continue;
 
-        c->fd = s;
-        if (redisSetBlocking(c,0) != REDIS_OK)
+        if (redisSetBlocking(c,s,0) != REDIS_OK)
             goto error;
-        if (c->tcp.source_addr) {
-            int bound = 0;
-            /* Using getaddrinfo saves us from self-determining IPv4 vs IPv6 */
-            if ((rv = getaddrinfo(c->tcp.source_addr, NULL, &hints, &bservinfo)) != 0) {
-                char buf[128];
-                snprintf(buf,sizeof(buf),"Can't get addr: %s",gai_strerror(rv));
-                __redisSetError(c,REDIS_ERR_OTHER,buf);
-                goto error;
-            }
-
-            if (reuseaddr) {
-                n = 1;
-                if (setsockopt(s, SOL_SOCKET, SO_REUSEADDR, (char*) &n,
-                               sizeof(n)) < 0) {
-                    goto error;
-                }
-            }
-
-            for (b = bservinfo; b != NULL; b = b->ai_next) {
-                if (bind(s,b->ai_addr,b->ai_addrlen) != -1) {
-                    bound = 1;
-                    break;
-                }
-            }
-            freeaddrinfo(bservinfo);
-            if (!bound) {
-                char buf[128];
-                snprintf(buf,sizeof(buf),"Can't bind socket: %s",strerror(errno));
-                __redisSetError(c,REDIS_ERR_OTHER,buf);
-                goto error;
-            }
-        }
         if (connect(s,p->ai_addr,p->ai_addrlen) == -1) {
             if (errno == EHOSTUNREACH) {
-                redisContextCloseFd(c);
+                close(s);
                 continue;
             } else if (errno == EINPROGRESS && !blocking) {
                 /* This is ok. */
-            } else if (errno == EADDRNOTAVAIL && reuseaddr) {
-                if (++reuses >= REDIS_CONNECT_RETRIES) {
-                    goto error;
-                } else {
-                    redisContextCloseFd(c);
-                    goto addrretry;
-                }
             } else {
-                if (redisContextWaitReady(c,timeout_msec) != REDIS_OK)
+                if (redisContextWaitReady(c,s,timeout) != REDIS_OK)
                     goto error;
             }
         }
-        if (blocking && redisSetBlocking(c,1) != REDIS_OK)
+        if (blocking && redisSetBlocking(c,s,1) != REDIS_OK)
             goto error;
-        if (redisSetTcpNoDelay(c) != REDIS_OK)
+        if (redisSetTcpNoDelay(c,s) != REDIS_OK)
             goto error;
 
+        c->fd = s;
         c->flags |= REDIS_CONNECTED;
         rv = REDIS_OK;
         goto end;
@@ -415,62 +260,32 @@ end:
     return rv;  // Need to return REDIS_OK if alright
 }
 
-int redisContextConnectTcp(redisContext *c, const char *addr, int port,
-                           const struct timeval *timeout) {
-    return _redisContextConnectTcp(c, addr, port, timeout, NULL);
-}
-
-int redisContextConnectBindTcp(redisContext *c, const char *addr, int port,
-                               const struct timeval *timeout,
-                               const char *source_addr) {
-    return _redisContextConnectTcp(c, addr, port, timeout, source_addr);
-}
-
-int redisContextConnectUnix(redisContext *c, const char *path, const struct timeval *timeout) {
+int redisContextConnectUnix(redisContext *c, const char *path, struct timeval *timeout) {
+    int s;
     int blocking = (c->flags & REDIS_BLOCK);
     struct sockaddr_un sa;
-    long timeout_msec = -1;
 
-    if (redisCreateSocket(c,AF_LOCAL) < 0)
+    if ((s = redisCreateSocket(c,AF_LOCAL)) < 0)
         return REDIS_ERR;
-    if (redisSetBlocking(c,0) != REDIS_OK)
-        return REDIS_ERR;
-
-    c->connection_type = REDIS_CONN_UNIX;
-    if (c->unix_sock.path != path)
-        c->unix_sock.path = strdup(path);
-
-    if (timeout) {
-        if (c->timeout != timeout) {
-            if (c->timeout == NULL)
-                c->timeout = malloc(sizeof(struct timeval));
-
-            memcpy(c->timeout, timeout, sizeof(struct timeval));
-        }
-    } else {
-        if (c->timeout)
-            free(c->timeout);
-        c->timeout = NULL;
-    }
-
-    if (redisContextTimeoutMsec(c,&timeout_msec) != REDIS_OK)
+    if (redisSetBlocking(c,s,0) != REDIS_OK)
         return REDIS_ERR;
 
     sa.sun_family = AF_LOCAL;
     strncpy(sa.sun_path,path,sizeof(sa.sun_path)-1);
-    if (connect(c->fd, (struct sockaddr*)&sa, sizeof(sa)) == -1) {
+    if (connect(s, (struct sockaddr*)&sa, sizeof(sa)) == -1) {
         if (errno == EINPROGRESS && !blocking) {
             /* This is ok. */
         } else {
-            if (redisContextWaitReady(c,timeout_msec) != REDIS_OK)
+            if (redisContextWaitReady(c,s,timeout) != REDIS_OK)
                 return REDIS_ERR;
         }
     }
 
     /* Reset socket to be blocking after connect(2). */
-    if (blocking && redisSetBlocking(c,1) != REDIS_OK)
+    if (blocking && redisSetBlocking(c,s,1) != REDIS_OK)
         return REDIS_ERR;
 
+    c->fd = s;
     c->flags |= REDIS_CONNECTED;
     return REDIS_OK;
 }

deps/hiredis/net.h

@@ -1,9 +1,7 @@
 /* Extracted from anet.c to work properly with Hiredis error reporting.
  *
- * Copyright (c) 2009-2011, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2010-2014, Pieter Noordhuis <pcnoordhuis at gmail dot com>
- * Copyright (c) 2015, Matt Stancliff <matt at genges dot com>,
- *                     Jan-Erik Rediger <janerik at fnordig dot com>
+ * Copyright (c) 2006-2011, Salvatore Sanfilippo <antirez at gmail dot com>
+ * Copyright (c) 2010-2011, Pieter Noordhuis <pcnoordhuis at gmail dot com>
  *
  * All rights reserved.
  *
@@ -41,13 +39,9 @@
 #define AF_LOCAL AF_UNIX
 #endif
 
-int redisCheckSocketError(redisContext *c);
-int redisContextSetTimeout(redisContext *c, const struct timeval tv);
-int redisContextConnectTcp(redisContext *c, const char *addr, int port, const struct timeval *timeout);
-int redisContextConnectBindTcp(redisContext *c, const char *addr, int port,
-                               const struct timeval *timeout,
-                               const char *source_addr);
-int redisContextConnectUnix(redisContext *c, const char *path, const struct timeval *timeout);
-int redisKeepAlive(redisContext *c, int interval);
+int redisCheckSocketError(redisContext *c, int fd);
+int redisContextSetTimeout(redisContext *c, struct timeval tv);
+int redisContextConnectTcp(redisContext *c, const char *addr, int port, struct timeval *timeout);
+int redisContextConnectUnix(redisContext *c, const char *path, struct timeval *timeout);
 
 #endif

deps/hiredis/read.c

@@ -1,525 +0,0 @@
-/*
- * Copyright (c) 2009-2011, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2010-2011, Pieter Noordhuis <pcnoordhuis at gmail dot com>
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- *   * Redistributions of source code must retain the above copyright notice,
- *     this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *   * Neither the name of Redis nor the names of its contributors may be used
- *     to endorse or promote products derived from this software without
- *     specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-#include "fmacros.h"
-#include <string.h>
-#include <stdlib.h>
-#ifndef _MSC_VER
-#include <unistd.h>
-#endif
-#include <assert.h>
-#include <errno.h>
-#include <ctype.h>
-
-#include "read.h"
-#include "sds.h"
-
-static void __redisReaderSetError(redisReader *r, int type, const char *str) {
-    size_t len;
-
-    if (r->reply != NULL && r->fn && r->fn->freeObject) {
-        r->fn->freeObject(r->reply);
-        r->reply = NULL;
-    }
-
-    /* Clear input buffer on errors. */
-    if (r->buf != NULL) {
-        sdsfree(r->buf);
-        r->buf = NULL;
-        r->pos = r->len = 0;
-    }
-
-    /* Reset task stack. */
-    r->ridx = -1;
-
-    /* Set error. */
-    r->err = type;
-    len = strlen(str);
-    len = len < (sizeof(r->errstr)-1) ? len : (sizeof(r->errstr)-1);
-    memcpy(r->errstr,str,len);
-    r->errstr[len] = '\0';
-}
-
-static size_t chrtos(char *buf, size_t size, char byte) {
-    size_t len = 0;
-
-    switch(byte) {
-    case '\\':
-    case '"':
-        len = snprintf(buf,size,"\"\\%c\"",byte);
-        break;
-    case '\n': len = snprintf(buf,size,"\"\\n\""); break;
-    case '\r': len = snprintf(buf,size,"\"\\r\""); break;
-    case '\t': len = snprintf(buf,size,"\"\\t\""); break;
-    case '\a': len = snprintf(buf,size,"\"\\a\""); break;
-    case '\b': len = snprintf(buf,size,"\"\\b\""); break;
-    default:
-        if (isprint(byte))
-            len = snprintf(buf,size,"\"%c\"",byte);
-        else
-            len = snprintf(buf,size,"\"\\x%02x\"",(unsigned char)byte);
-        break;
-    }
-
-    return len;
-}
-
-static void __redisReaderSetErrorProtocolByte(redisReader *r, char byte) {
-    char cbuf[8], sbuf[128];
-
-    chrtos(cbuf,sizeof(cbuf),byte);
-    snprintf(sbuf,sizeof(sbuf),
-        "Protocol error, got %s as reply type byte", cbuf);
-    __redisReaderSetError(r,REDIS_ERR_PROTOCOL,sbuf);
-}
-
-static void __redisReaderSetErrorOOM(redisReader *r) {
-    __redisReaderSetError(r,REDIS_ERR_OOM,"Out of memory");
-}
-
-static char *readBytes(redisReader *r, unsigned int bytes) {
-    char *p;
-    if (r->len-r->pos >= bytes) {
-        p = r->buf+r->pos;
-        r->pos += bytes;
-        return p;
-    }
-    return NULL;
-}
-
-/* Find pointer to \r\n. */
-static char *seekNewline(char *s, size_t len) {
-    int pos = 0;
-    int _len = len-1;
-
-    /* Position should be < len-1 because the character at "pos" should be
-     * followed by a \n. Note that strchr cannot be used because it doesn't
-     * allow to search a limited length and the buffer that is being searched
-     * might not have a trailing NULL character. */
-    while (pos < _len) {
-        while(pos < _len && s[pos] != '\r') pos++;
-        if (pos==_len) {
-            /* Not found. */
-            return NULL;
-        } else {
-            if (s[pos+1] == '\n') {
-                /* Found. */
-                return s+pos;
-            } else {
-                /* Continue searching. */
-                pos++;
-            }
-        }
-    }
-    return NULL;
-}
-
-/* Read a long long value starting at *s, under the assumption that it will be
- * terminated by \r\n. Ambiguously returns -1 for unexpected input. */
-static long long readLongLong(char *s) {
-    long long v = 0;
-    int dec, mult = 1;
-    char c;
-
-    if (*s == '-') {
-        mult = -1;
-        s++;
-    } else if (*s == '+') {
-        mult = 1;
-        s++;
-    }
-
-    while ((c = *(s++)) != '\r') {
-        dec = c - '0';
-        if (dec >= 0 && dec < 10) {
-            v *= 10;
-            v += dec;
-        } else {
-            /* Should not happen... */
-            return -1;
-        }
-    }
-
-    return mult*v;
-}
-
-static char *readLine(redisReader *r, int *_len) {
-    char *p, *s;
-    int len;
-
-    p = r->buf+r->pos;
-    s = seekNewline(p,(r->len-r->pos));
-    if (s != NULL) {
-        len = s-(r->buf+r->pos);
-        r->pos += len+2; /* skip \r\n */
-        if (_len) *_len = len;
-        return p;
-    }
-    return NULL;
-}
-
-static void moveToNextTask(redisReader *r) {
-    redisReadTask *cur, *prv;
-    while (r->ridx >= 0) {
-        /* Return a.s.a.p. when the stack is now empty. */
-        if (r->ridx == 0) {
-            r->ridx--;
-            return;
-        }
-
-        cur = &(r->rstack[r->ridx]);
-        prv = &(r->rstack[r->ridx-1]);
-        assert(prv->type == REDIS_REPLY_ARRAY);
-        if (cur->idx == prv->elements-1) {
-            r->ridx--;
-        } else {
-            /* Reset the type because the next item can be anything */
-            assert(cur->idx < prv->elements);
-            cur->type = -1;
-            cur->elements = -1;
-            cur->idx++;
-            return;
-        }
-    }
-}
-
-static int processLineItem(redisReader *r) {
-    redisReadTask *cur = &(r->rstack[r->ridx]);
-    void *obj;
-    char *p;
-    int len;
-
-    if ((p = readLine(r,&len)) != NULL) {
-        if (cur->type == REDIS_REPLY_INTEGER) {
-            if (r->fn && r->fn->createInteger)
-                obj = r->fn->createInteger(cur,readLongLong(p));
-            else
-                obj = (void*)REDIS_REPLY_INTEGER;
-        } else {
-            /* Type will be error or status. */
-            if (r->fn && r->fn->createString)
-                obj = r->fn->createString(cur,p,len);
-            else
-                obj = (void*)(size_t)(cur->type);
-        }
-
-        if (obj == NULL) {
-            __redisReaderSetErrorOOM(r);
-            return REDIS_ERR;
-        }
-
-        /* Set reply if this is the root object. */
-        if (r->ridx == 0) r->reply = obj;
-        moveToNextTask(r);
-        return REDIS_OK;
-    }
-
-    return REDIS_ERR;
-}
-
-static int processBulkItem(redisReader *r) {
-    redisReadTask *cur = &(r->rstack[r->ridx]);
-    void *obj = NULL;
-    char *p, *s;
-    long len;
-    unsigned long bytelen;
-    int success = 0;
-
-    p = r->buf+r->pos;
-    s = seekNewline(p,r->len-r->pos);
-    if (s != NULL) {
-        p = r->buf+r->pos;
-        bytelen = s-(r->buf+r->pos)+2; /* include \r\n */
-        len = readLongLong(p);
-
-        if (len < 0) {
-            /* The nil object can always be created. */
-            if (r->fn && r->fn->createNil)
-                obj = r->fn->createNil(cur);
-            else
-                obj = (void*)REDIS_REPLY_NIL;
-            success = 1;
-        } else {
-            /* Only continue when the buffer contains the entire bulk item. */
-            bytelen += len+2; /* include \r\n */
-            if (r->pos+bytelen <= r->len) {
-                if (r->fn && r->fn->createString)
-                    obj = r->fn->createString(cur,s+2,len);
-                else
-                    obj = (void*)REDIS_REPLY_STRING;
-                success = 1;
-            }
-        }
-
-        /* Proceed when obj was created. */
-        if (success) {
-            if (obj == NULL) {
-                __redisReaderSetErrorOOM(r);
-                return REDIS_ERR;
-            }
-
-            r->pos += bytelen;
-
-            /* Set reply if this is the root object. */
-            if (r->ridx == 0) r->reply = obj;
-            moveToNextTask(r);
-            return REDIS_OK;
-        }
-    }
-
-    return REDIS_ERR;
-}
-
-static int processMultiBulkItem(redisReader *r) {
-    redisReadTask *cur = &(r->rstack[r->ridx]);
-    void *obj;
-    char *p;
-    long elements;
-    int root = 0;
-
-    /* Set error for nested multi bulks with depth > 7 */
-    if (r->ridx == 8) {
-        __redisReaderSetError(r,REDIS_ERR_PROTOCOL,
-            "No support for nested multi bulk replies with depth > 7");
-        return REDIS_ERR;
-    }
-
-    if ((p = readLine(r,NULL)) != NULL) {
-        elements = readLongLong(p);
-        root = (r->ridx == 0);
-
-        if (elements == -1) {
-            if (r->fn && r->fn->createNil)
-                obj = r->fn->createNil(cur);
-            else
-                obj = (void*)REDIS_REPLY_NIL;
-
-            if (obj == NULL) {
-                __redisReaderSetErrorOOM(r);
-                return REDIS_ERR;
-            }
-
-            moveToNextTask(r);
-        } else {
-            if (r->fn && r->fn->createArray)
-                obj = r->fn->createArray(cur,elements);
-            else
-                obj = (void*)REDIS_REPLY_ARRAY;
-
-            if (obj == NULL) {
-                __redisReaderSetErrorOOM(r);
-                return REDIS_ERR;
-            }
-
-            /* Modify task stack when there are more than 0 elements. */
-            if (elements > 0) {
-                cur->elements = elements;
-                cur->obj = obj;
-                r->ridx++;
-                r->rstack[r->ridx].type = -1;
-                r->rstack[r->ridx].elements = -1;
-                r->rstack[r->ridx].idx = 0;
-                r->rstack[r->ridx].obj = NULL;
-                r->rstack[r->ridx].parent = cur;
-                r->rstack[r->ridx].privdata = r->privdata;
-            } else {
-                moveToNextTask(r);
-            }
-        }
-
-        /* Set reply if this is the root object. */
-        if (root) r->reply = obj;
-        return REDIS_OK;
-    }
-
-    return REDIS_ERR;
-}
-
-static int processItem(redisReader *r) {
-    redisReadTask *cur = &(r->rstack[r->ridx]);
-    char *p;
-
-    /* check if we need to read type */
-    if (cur->type < 0) {
-        if ((p = readBytes(r,1)) != NULL) {
-            switch (p[0]) {
-            case '-':
-                cur->type = REDIS_REPLY_ERROR;
-                break;
-            case '+':
-                cur->type = REDIS_REPLY_STATUS;
-                break;
-            case ':':
-                cur->type = REDIS_REPLY_INTEGER;
-                break;
-            case '$':
-                cur->type = REDIS_REPLY_STRING;
-                break;
-            case '*':
-                cur->type = REDIS_REPLY_ARRAY;
-                break;
-            default:
-                __redisReaderSetErrorProtocolByte(r,*p);
-                return REDIS_ERR;
-            }
-        } else {
-            /* could not consume 1 byte */
-            return REDIS_ERR;
-        }
-    }
-
-    /* process typed item */
-    switch(cur->type) {
-    case REDIS_REPLY_ERROR:
-    case REDIS_REPLY_STATUS:
-    case REDIS_REPLY_INTEGER:
-        return processLineItem(r);
-    case REDIS_REPLY_STRING:
-        return processBulkItem(r);
-    case REDIS_REPLY_ARRAY:
-        return processMultiBulkItem(r);
-    default:
-        assert(NULL);
-        return REDIS_ERR; /* Avoid warning. */
-    }
-}
-
-redisReader *redisReaderCreateWithFunctions(redisReplyObjectFunctions *fn) {
-    redisReader *r;
-
-    r = calloc(sizeof(redisReader),1);
-    if (r == NULL)
-        return NULL;
-
-    r->err = 0;
-    r->errstr[0] = '\0';
-    r->fn = fn;
-    r->buf = sdsempty();
-    r->maxbuf = REDIS_READER_MAX_BUF;
-    if (r->buf == NULL) {
-        free(r);
-        return NULL;
-    }
-
-    r->ridx = -1;
-    return r;
-}
-
-void redisReaderFree(redisReader *r) {
-    if (r->reply != NULL && r->fn && r->fn->freeObject)
-        r->fn->freeObject(r->reply);
-    if (r->buf != NULL)
-        sdsfree(r->buf);
-    free(r);
-}
-
-int redisReaderFeed(redisReader *r, const char *buf, size_t len) {
-    sds newbuf;
-
-    /* Return early when this reader is in an erroneous state. */
-    if (r->err)
-        return REDIS_ERR;
-
-    /* Copy the provided buffer. */
-    if (buf != NULL && len >= 1) {
-        /* Destroy internal buffer when it is empty and is quite large. */
-        if (r->len == 0 && r->maxbuf != 0 && sdsavail(r->buf) > r->maxbuf) {
-            sdsfree(r->buf);
-            r->buf = sdsempty();
-            r->pos = 0;
-
-            /* r->buf should not be NULL since we just free'd a larger one. */
-            assert(r->buf != NULL);
-        }
-
-        newbuf = sdscatlen(r->buf,buf,len);
-        if (newbuf == NULL) {
-            __redisReaderSetErrorOOM(r);
-            return REDIS_ERR;
-        }
-
-        r->buf = newbuf;
-        r->len = sdslen(r->buf);
-    }
-
-    return REDIS_OK;
-}
-
-int redisReaderGetReply(redisReader *r, void **reply) {
-    /* Default target pointer to NULL. */
-    if (reply != NULL)
-        *reply = NULL;
-
-    /* Return early when this reader is in an erroneous state. */
-    if (r->err)
-        return REDIS_ERR;
-
-    /* When the buffer is empty, there will never be a reply. */
-    if (r->len == 0)
-        return REDIS_OK;
-
-    /* Set first item to process when the stack is empty. */
-    if (r->ridx == -1) {
-        r->rstack[0].type = -1;
-        r->rstack[0].elements = -1;
-        r->rstack[0].idx = -1;
-        r->rstack[0].obj = NULL;
-        r->rstack[0].parent = NULL;
-        r->rstack[0].privdata = r->privdata;
-        r->ridx = 0;
-    }
-
-    /* Process items in reply. */
-    while (r->ridx >= 0)
-        if (processItem(r) != REDIS_OK)
-            break;
-
-    /* Return ASAP when an error occurred. */
-    if (r->err)
-        return REDIS_ERR;
-
-    /* Discard part of the buffer when we've consumed at least 1k, to avoid
-     * doing unnecessary calls to memmove() in sds.c. */
-    if (r->pos >= 1024) {
-        sdsrange(r->buf,r->pos,-1);
-        r->pos = 0;
-        r->len = sdslen(r->buf);
-    }
-
-    /* Emit a reply when there is one. */
-    if (r->ridx == -1) {
-        if (reply != NULL)
-            *reply = r->reply;
-        r->reply = NULL;
-    }
-    return REDIS_OK;
-}

deps/hiredis/read.h

@@ -1,111 +0,0 @@
-/*
- * Copyright (c) 2009-2011, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2010-2011, Pieter Noordhuis <pcnoordhuis at gmail dot com>
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- *   * Redistributions of source code must retain the above copyright notice,
- *     this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *   * Neither the name of Redis nor the names of its contributors may be used
- *     to endorse or promote products derived from this software without
- *     specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-#ifndef __HIREDIS_READ_H
-#define __HIREDIS_READ_H
-#include <stdio.h> /* for size_t */
-
-#define REDIS_ERR -1
-#define REDIS_OK 0
-
-/* When an error occurs, the err flag in a context is set to hold the type of
- * error that occurred. REDIS_ERR_IO means there was an I/O error and you
- * should use the "errno" variable to find out what is wrong.
- * For other values, the "errstr" field will hold a description. */
-#define REDIS_ERR_IO 1 /* Error in read or write */
-#define REDIS_ERR_EOF 3 /* End of file */
-#define REDIS_ERR_PROTOCOL 4 /* Protocol error */
-#define REDIS_ERR_OOM 5 /* Out of memory */
-#define REDIS_ERR_OTHER 2 /* Everything else... */
-
-#define REDIS_REPLY_STRING 1
-#define REDIS_REPLY_ARRAY 2
-#define REDIS_REPLY_INTEGER 3
-#define REDIS_REPLY_NIL 4
-#define REDIS_REPLY_STATUS 5
-#define REDIS_REPLY_ERROR 6
-
-#define REDIS_READER_MAX_BUF (1024*16)  /* Default max unused reader buffer. */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct redisReadTask {
-    int type;
-    int elements; /* number of elements in multibulk container */
-    int idx; /* index in parent (array) object */
-    void *obj; /* holds user-generated value for a read task */
-    struct redisReadTask *parent; /* parent task */
-    void *privdata; /* user-settable arbitrary field */
-} redisReadTask;
-
-typedef struct redisReplyObjectFunctions {
-    void *(*createString)(const redisReadTask*, char*, size_t);
-    void *(*createArray)(const redisReadTask*, int);
-    void *(*createInteger)(const redisReadTask*, long long);
-    void *(*createNil)(const redisReadTask*);
-    void (*freeObject)(void*);
-} redisReplyObjectFunctions;
-
-typedef struct redisReader {
-    int err; /* Error flags, 0 when there is no error */
-    char errstr[128]; /* String representation of error when applicable */
-
-    char *buf; /* Read buffer */
-    size_t pos; /* Buffer cursor */
-    size_t len; /* Buffer length */
-    size_t maxbuf; /* Max length of unused buffer */
-
-    redisReadTask rstack[9];
-    int ridx; /* Index of current read task */
-    void *reply; /* Temporary reply pointer */
-
-    redisReplyObjectFunctions *fn;
-    void *privdata;
-} redisReader;
-
-/* Public API for the protocol parser. */
-redisReader *redisReaderCreateWithFunctions(redisReplyObjectFunctions *fn);
-void redisReaderFree(redisReader *r);
-int redisReaderFeed(redisReader *r, const char *buf, size_t len);
-int redisReaderGetReply(redisReader *r, void **reply);
-
-#define redisReaderSetPrivdata(_r, _p) (int)(((redisReader*)(_r))->privdata = (_p))
-#define redisReaderGetObject(_r) (((redisReader*)(_r))->reply)
-#define redisReaderGetError(_r) (((redisReader*)(_r))->errstr)
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

deps/hiredis/sds.h

@@ -1,8 +1,6 @@
-/* SDSLib 2.0 -- A C dynamic strings library
+/* SDSLib, A C dynamic strings library
  *
- * Copyright (c) 2006-2015, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2015, Oran Agra
- * Copyright (c) 2015, Redis Labs, Inc
+ * Copyright (c) 2006-2010, Salvatore Sanfilippo <antirez at gmail dot com>
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -33,198 +31,39 @@
 #ifndef __SDS_H
 #define __SDS_H
 
-#define SDS_MAX_PREALLOC (1024*1024)
-
 #include <sys/types.h>
 #include <stdarg.h>
-#include <stdint.h>
 
 typedef char *sds;
 
-/* Note: sdshdr5 is never used, we just access the flags byte directly.
- * However is here to document the layout of type 5 SDS strings. */
-struct __attribute__ ((__packed__)) sdshdr5 {
-    unsigned char flags; /* 3 lsb of type, and 5 msb of string length */
+struct sdshdr {
+    int len;
+    int free;
     char buf[];
 };
-struct __attribute__ ((__packed__)) sdshdr8 {
-    uint8_t len; /* used */
-    uint8_t alloc; /* excluding the header and null terminator */
-    unsigned char flags; /* 3 lsb of type, 5 unused bits */
-    char buf[];
-};
-struct __attribute__ ((__packed__)) sdshdr16 {
-    uint16_t len; /* used */
-    uint16_t alloc; /* excluding the header and null terminator */
-    unsigned char flags; /* 3 lsb of type, 5 unused bits */
-    char buf[];
-};
-struct __attribute__ ((__packed__)) sdshdr32 {
-    uint32_t len; /* used */
-    uint32_t alloc; /* excluding the header and null terminator */
-    unsigned char flags; /* 3 lsb of type, 5 unused bits */
-    char buf[];
-};
-struct __attribute__ ((__packed__)) sdshdr64 {
-    uint64_t len; /* used */
-    uint64_t alloc; /* excluding the header and null terminator */
-    unsigned char flags; /* 3 lsb of type, 5 unused bits */
-    char buf[];
-};
-
-#define SDS_TYPE_5  0
-#define SDS_TYPE_8  1
-#define SDS_TYPE_16 2
-#define SDS_TYPE_32 3
-#define SDS_TYPE_64 4
-#define SDS_TYPE_MASK 7
-#define SDS_TYPE_BITS 3
-#define SDS_HDR_VAR(T,s) struct sdshdr##T *sh = (struct sdshdr##T *)((s)-(sizeof(struct sdshdr##T)));
-#define SDS_HDR(T,s) ((struct sdshdr##T *)((s)-(sizeof(struct sdshdr##T))))
-#define SDS_TYPE_5_LEN(f) ((f)>>SDS_TYPE_BITS)
 
 static inline size_t sdslen(const sds s) {
-    unsigned char flags = s[-1];
-    switch(flags&SDS_TYPE_MASK) {
-        case SDS_TYPE_5:
-            return SDS_TYPE_5_LEN(flags);
-        case SDS_TYPE_8:
-            return SDS_HDR(8,s)->len;
-        case SDS_TYPE_16:
-            return SDS_HDR(16,s)->len;
-        case SDS_TYPE_32:
-            return SDS_HDR(32,s)->len;
-        case SDS_TYPE_64:
-            return SDS_HDR(64,s)->len;
-    }
-    return 0;
+    struct sdshdr *sh = (void*)(s-(sizeof(struct sdshdr)));
+    return sh->len;
 }
 
 static inline size_t sdsavail(const sds s) {
-    unsigned char flags = s[-1];
-    switch(flags&SDS_TYPE_MASK) {
-        case SDS_TYPE_5: {
-            return 0;
-        }
-        case SDS_TYPE_8: {
-            SDS_HDR_VAR(8,s);
-            return sh->alloc - sh->len;
-        }
-        case SDS_TYPE_16: {
-            SDS_HDR_VAR(16,s);
-            return sh->alloc - sh->len;
-        }
-        case SDS_TYPE_32: {
-            SDS_HDR_VAR(32,s);
-            return sh->alloc - sh->len;
-        }
-        case SDS_TYPE_64: {
-            SDS_HDR_VAR(64,s);
-            return sh->alloc - sh->len;
-        }
-    }
-    return 0;
-}
-
-static inline void sdssetlen(sds s, size_t newlen) {
-    unsigned char flags = s[-1];
-    switch(flags&SDS_TYPE_MASK) {
-        case SDS_TYPE_5:
-            {
-                unsigned char *fp = ((unsigned char*)s)-1;
-                *fp = SDS_TYPE_5 | (newlen << SDS_TYPE_BITS);
-            }
-            break;
-        case SDS_TYPE_8:
-            SDS_HDR(8,s)->len = newlen;
-            break;
-        case SDS_TYPE_16:
-            SDS_HDR(16,s)->len = newlen;
-            break;
-        case SDS_TYPE_32:
-            SDS_HDR(32,s)->len = newlen;
-            break;
-        case SDS_TYPE_64:
-            SDS_HDR(64,s)->len = newlen;
-            break;
-    }
-}
-
-static inline void sdsinclen(sds s, size_t inc) {
-    unsigned char flags = s[-1];
-    switch(flags&SDS_TYPE_MASK) {
-        case SDS_TYPE_5:
-            {
-                unsigned char *fp = ((unsigned char*)s)-1;
-                unsigned char newlen = SDS_TYPE_5_LEN(flags)+inc;
-                *fp = SDS_TYPE_5 | (newlen << SDS_TYPE_BITS);
-            }
-            break;
-        case SDS_TYPE_8:
-            SDS_HDR(8,s)->len += inc;
-            break;
-        case SDS_TYPE_16:
-            SDS_HDR(16,s)->len += inc;
-            break;
-        case SDS_TYPE_32:
-            SDS_HDR(32,s)->len += inc;
-            break;
-        case SDS_TYPE_64:
-            SDS_HDR(64,s)->len += inc;
-            break;
-    }
-}
-
-/* sdsalloc() = sdsavail() + sdslen() */
-static inline size_t sdsalloc(const sds s) {
-    unsigned char flags = s[-1];
-    switch(flags&SDS_TYPE_MASK) {
-        case SDS_TYPE_5:
-            return SDS_TYPE_5_LEN(flags);
-        case SDS_TYPE_8:
-            return SDS_HDR(8,s)->alloc;
-        case SDS_TYPE_16:
-            return SDS_HDR(16,s)->alloc;
-        case SDS_TYPE_32:
-            return SDS_HDR(32,s)->alloc;
-        case SDS_TYPE_64:
-            return SDS_HDR(64,s)->alloc;
-    }
-    return 0;
-}
-
-static inline void sdssetalloc(sds s, size_t newlen) {
-    unsigned char flags = s[-1];
-    switch(flags&SDS_TYPE_MASK) {
-        case SDS_TYPE_5:
-            /* Nothing to do, this type has no total allocation info. */
-            break;
-        case SDS_TYPE_8:
-            SDS_HDR(8,s)->alloc = newlen;
-            break;
-        case SDS_TYPE_16:
-            SDS_HDR(16,s)->alloc = newlen;
-            break;
-        case SDS_TYPE_32:
-            SDS_HDR(32,s)->alloc = newlen;
-            break;
-        case SDS_TYPE_64:
-            SDS_HDR(64,s)->alloc = newlen;
-            break;
-    }
+    struct sdshdr *sh = (void*)(s-(sizeof(struct sdshdr)));
+    return sh->free;
 }
 
 sds sdsnewlen(const void *init, size_t initlen);
 sds sdsnew(const char *init);
 sds sdsempty(void);
+size_t sdslen(const sds s);
 sds sdsdup(const sds s);
 void sdsfree(sds s);
+size_t sdsavail(sds s);
 sds sdsgrowzero(sds s, size_t len);
 sds sdscatlen(sds s, const void *t, size_t len);
 sds sdscat(sds s, const char *t);
-sds sdscatsds(sds s, const sds t);
-sds sdscpylen(sds s, const char *t, size_t len);
-sds sdscpy(sds s, const char *t);
+sds sdscpylen(sds s, char *t, size_t len);
+sds sdscpy(sds s, char *t);
 
 sds sdscatvprintf(sds s, const char *fmt, va_list ap);
 #ifdef __GNUC__
@@ -234,40 +73,16 @@ sds sdscatprintf(sds s, const char *fmt, ...)
 sds sdscatprintf(sds s, const char *fmt, ...);
 #endif
 
-sds sdscatfmt(sds s, char const *fmt, ...);
 sds sdstrim(sds s, const char *cset);
-void sdsrange(sds s, int start, int end);
+sds sdsrange(sds s, int start, int end);
 void sdsupdatelen(sds s);
-void sdsclear(sds s);
-int sdscmp(const sds s1, const sds s2);
-sds *sdssplitlen(const char *s, int len, const char *sep, int seplen, int *count);
+int sdscmp(sds s1, sds s2);
+sds *sdssplitlen(char *s, int len, char *sep, int seplen, int *count);
 void sdsfreesplitres(sds *tokens, int count);
 void sdstolower(sds s);
 void sdstoupper(sds s);
 sds sdsfromlonglong(long long value);
-sds sdscatrepr(sds s, const char *p, size_t len);
-sds *sdssplitargs(const char *line, int *argc);
-sds sdsmapchars(sds s, const char *from, const char *to, size_t setlen);
-sds sdsjoin(char **argv, int argc, char *sep);
-sds sdsjoinsds(sds *argv, int argc, const char *sep, size_t seplen);
-
-/* Low level functions exposed to the user API */
-sds sdsMakeRoomFor(sds s, size_t addlen);
-void sdsIncrLen(sds s, int incr);
-sds sdsRemoveFreeSpace(sds s);
-size_t sdsAllocSize(sds s);
-void *sdsAllocPtr(sds s);
-
-/* Export the allocator used by SDS to the program using SDS.
- * Sometimes the program SDS is linked to, may use a different set of
- * allocators, but may want to allocate or free things that SDS will
- * respectively free or allocate. */
-void *sds_malloc(size_t size);
-void *sds_realloc(void *ptr, size_t size);
-void sds_free(void *ptr);
-
-#ifdef REDIS_TEST
-int sdsTest(int argc, char *argv[]);
-#endif
+sds sdscatrepr(sds s, char *p, size_t len);
+sds *sdssplitargs(char *line, int *argc);
 
 #endif

deps/hiredis/sdsalloc.h

@@ -1,42 +0,0 @@
-/* SDSLib 2.0 -- A C dynamic strings library
- *
- * Copyright (c) 2006-2015, Salvatore Sanfilippo <antirez at gmail dot com>
- * Copyright (c) 2015, Oran Agra
- * Copyright (c) 2015, Redis Labs, Inc
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- *   * Redistributions of source code must retain the above copyright notice,
- *     this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in the
- *     documentation and/or other materials provided with the distribution.
- *   * Neither the name of Redis nor the names of its contributors may be used
- *     to endorse or promote products derived from this software without
- *     specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* SDS allocator selection.
- *
- * This file is used in order to change the SDS allocator at compile time.
- * Just define the following defines to what you want to use. Also add
- * the include of your alternate allocator if needed (not needed in order
- * to use the default libc allocator). */
-
-#define s_malloc malloc
-#define s_realloc realloc
-#define s_free free

deps/hiredis/test.c

@@ -8,15 +8,12 @@
 #include <unistd.h>
 #include <signal.h>
 #include <errno.h>
-#include <limits.h>
 
 #include "hiredis.h"
-#include "net.h"
 
 enum connection_type {
     CONN_TCP,
-    CONN_UNIX,
-    CONN_FD
+    CONN_UNIX
 };
 
 struct config {
@@ -25,12 +22,11 @@ struct config {
     struct {
         const char *host;
         int port;
-        struct timeval timeout;
     } tcp;
 
     struct {
         const char *path;
-    } unix_sock;
+    } unix;
 };
 
 /* The following lines make up our testing "framework" :) */
@@ -44,13 +40,6 @@ static long long usec(void) {
     return (((long long)tv.tv_sec)*1000000)+tv.tv_usec;
 }
 
-/* The assert() calls below have side effects, so we need assert()
- * even if we are compiling without asserts (-DNDEBUG). */
-#ifdef NDEBUG
-#undef assert
-#define assert(e) (void)(e)
-#endif
-
 static redisContext *select_database(redisContext *c) {
     redisReply *reply;
 
@@ -73,7 +62,7 @@ static redisContext *select_database(redisContext *c) {
     return c;
 }
 
-static int disconnect(redisContext *c, int keep_fd) {
+static void disconnect(redisContext *c) {
     redisReply *reply;
 
     /* Make sure we're on DB 9. */
@@ -84,11 +73,8 @@ static int disconnect(redisContext *c, int keep_fd) {
     assert(reply != NULL);
     freeReplyObject(reply);
 
-    /* Free the context as well, but keep the fd if requested. */
-    if (keep_fd)
-        return redisFreeKeepFd(c);
+    /* Free the context as well. */
     redisFree(c);
-    return -1;
 }
 
 static redisContext *connect(struct config config) {
@@ -97,25 +83,13 @@ static redisContext *connect(struct config config) {
     if (config.type == CONN_TCP) {
         c = redisConnect(config.tcp.host, config.tcp.port);
     } else if (config.type == CONN_UNIX) {
-        c = redisConnectUnix(config.unix_sock.path);
-    } else if (config.type == CONN_FD) {
-        /* Create a dummy connection just to get an fd to inherit */
-        redisContext *dummy_ctx = redisConnectUnix(config.unix_sock.path);
-        if (dummy_ctx) {
-            int fd = disconnect(dummy_ctx, 1);
-            printf("Connecting to inherited fd %d\n", fd);
-            c = redisConnectFd(fd);
-        }
+        c = redisConnectUnix(config.unix.path);
     } else {
         assert(NULL);
     }
 
-    if (c == NULL) {
-        printf("Connection error: can't allocate redis context\n");
-        exit(1);
-    } else if (c->err) {
+    if (c->err) {
         printf("Connection error: %s\n", c->errstr);
-        redisFree(c);
         exit(1);
     }
 
@@ -151,13 +125,13 @@ static void test_format_commands(void) {
     free(cmd);
 
     test("Format command with %%b string interpolation: ");
-    len = redisFormatCommand(&cmd,"SET %b %b","foo",(size_t)3,"b\0r",(size_t)3);
+    len = redisFormatCommand(&cmd,"SET %b %b","foo",3,"b\0r",3);
     test_cond(strncmp(cmd,"*3\r\n$3\r\nSET\r\n$3\r\nfoo\r\n$3\r\nb\0r\r\n",len) == 0 &&
         len == 4+4+(3+2)+4+(3+2)+4+(3+2));
     free(cmd);
 
     test("Format command with %%b and an empty string: ");
-    len = redisFormatCommand(&cmd,"SET %b %b","foo",(size_t)3,"",(size_t)0);
+    len = redisFormatCommand(&cmd,"SET %b %b","foo",3,"",0);
     test_cond(strncmp(cmd,"*3\r\n$3\r\nSET\r\n$3\r\nfoo\r\n$0\r\n\r\n",len) == 0 &&
         len == 4+4+(3+2)+4+(3+2)+4+(0+2));
     free(cmd);
@@ -203,7 +177,7 @@ static void test_format_commands(void) {
     FLOAT_WIDTH_TEST(double);
 
     test("Format command with invalid printf format: ");
-    len = redisFormatCommand(&cmd,"key:%08p %b",(void*)1234,"foo",(size_t)3);
+    len = redisFormatCommand(&cmd,"key:%08p %b",(void*)1234,"foo",3);
     test_cond(len == -1);
 
     const char *argv[3];
@@ -224,51 +198,12 @@ static void test_format_commands(void) {
     test_cond(strncmp(cmd,"*3\r\n$3\r\nSET\r\n$7\r\nfoo\0xxx\r\n$3\r\nbar\r\n",len) == 0 &&
         len == 4+4+(3+2)+4+(7+2)+4+(3+2));
     free(cmd);
-
-    sds sds_cmd;
-
-    sds_cmd = sdsempty();
-    test("Format command into sds by passing argc/argv without lengths: ");
-    len = redisFormatSdsCommandArgv(&sds_cmd,argc,argv,NULL);
-    test_cond(strncmp(sds_cmd,"*3\r\n$3\r\nSET\r\n$3\r\nfoo\r\n$3\r\nbar\r\n",len) == 0 &&
-        len == 4+4+(3+2)+4+(3+2)+4+(3+2));
-    sdsfree(sds_cmd);
-
-    sds_cmd = sdsempty();
-    test("Format command into sds by passing argc/argv with lengths: ");
-    len = redisFormatSdsCommandArgv(&sds_cmd,argc,argv,lens);
-    test_cond(strncmp(sds_cmd,"*3\r\n$3\r\nSET\r\n$7\r\nfoo\0xxx\r\n$3\r\nbar\r\n",len) == 0 &&
-        len == 4+4+(3+2)+4+(7+2)+4+(3+2));
-    sdsfree(sds_cmd);
-}
-
-static void test_append_formatted_commands(struct config config) {
-    redisContext *c;
-    redisReply *reply;
-    char *cmd;
-    int len;
-
-    c = connect(config);
-
-    test("Append format command: ");
-
-    len = redisFormatCommand(&cmd, "SET foo bar");
-
-    test_cond(redisAppendFormattedCommand(c, cmd, len) == REDIS_OK);
-
-    assert(redisGetReply(c, (void*)&reply) == REDIS_OK);
-
-    free(cmd);
-    freeReplyObject(reply);
-
-    disconnect(c, 0);
 }
 
 static void test_reply_reader(void) {
     redisReader *reader;
     void *reply;
     int ret;
-    int i;
 
     test("Error handling in reply parser: ");
     reader = redisReaderCreate();
@@ -290,13 +225,12 @@ static void test_reply_reader(void) {
               strcasecmp(reader->errstr,"Protocol error, got \"@\" as reply type byte") == 0);
     redisReaderFree(reader);
 
-    test("Set error on nested multi bulks with depth > 7: ");
+    test("Set error on nested multi bulks with depth > 2: ");
     reader = redisReaderCreate();
-
-    for (i = 0; i < 9; i++) {
-        redisReaderFeed(reader,(char*)"*1\r\n",4);
-    }
-
+    redisReaderFeed(reader,(char*)"*1\r\n",4);
+    redisReaderFeed(reader,(char*)"*1\r\n",4);
+    redisReaderFeed(reader,(char*)"*1\r\n",4);
+    redisReaderFeed(reader,(char*)"*1\r\n",4);
     ret = redisReaderGetReply(reader,NULL);
     test_cond(ret == REDIS_ERR &&
               strncasecmp(reader->errstr,"No support for",14) == 0);
@@ -343,32 +277,14 @@ static void test_reply_reader(void) {
     redisReaderFree(reader);
 }
 
-static void test_free_null(void) {
-    void *redisCtx = NULL;
-    void *reply = NULL;
-
-    test("Don't fail when redisFree is passed a NULL value: ");
-    redisFree(redisCtx);
-    test_cond(redisCtx == NULL);
-
-    test("Don't fail when freeReplyObject is passed a NULL value: ");
-    freeReplyObject(reply);
-    test_cond(reply == NULL);
-}
-
 static void test_blocking_connection_errors(void) {
     redisContext *c;
 
     test("Returns error when host cannot be resolved: ");
-    c = redisConnect((char*)"idontexist.test", 6379);
+    c = redisConnect((char*)"idontexist.local", 6379);
     test_cond(c->err == REDIS_ERR_OTHER &&
         (strcmp(c->errstr,"Name or service not known") == 0 ||
-         strcmp(c->errstr,"Can't resolve: idontexist.test") == 0 ||
-         strcmp(c->errstr,"nodename nor servname provided, or not known") == 0 ||
-         strcmp(c->errstr,"No address associated with hostname") == 0 ||
-         strcmp(c->errstr,"Temporary failure in name resolution") == 0 ||
-         strcmp(c->errstr,"hostname nor servname provided, or not known") == 0 ||
-         strcmp(c->errstr,"no address associated with name") == 0));
+         strcmp(c->errstr,"Can't resolve: idontexist.local") == 0));
     redisFree(c);
 
     test("Returns error when the port is not open: ");
@@ -377,7 +293,7 @@ static void test_blocking_connection_errors(void) {
         strcmp(c->errstr,"Connection refused") == 0);
     redisFree(c);
 
-    test("Returns error when the unix_sock socket path doesn't accept connections: ");
+    test("Returns error when the unix socket path doesn't accept connections: ");
     c = redisConnectUnix((char*)"/tmp/idontexist.sock");
     test_cond(c->err == REDIS_ERR_IO); /* Don't care about the message... */
     redisFree(c);
@@ -410,7 +326,7 @@ static void test_blocking_connection(struct config config) {
     freeReplyObject(reply);
 
     test("%%b String interpolation works: ");
-    reply = redisCommand(c,"SET %b %b","foo",(size_t)3,"hello\x00world",(size_t)11);
+    reply = redisCommand(c,"SET %b %b","foo",3,"hello\x00world",11);
     freeReplyObject(reply);
     reply = redisCommand(c,"GET foo");
     test_cond(reply->type == REDIS_REPLY_STRING &&
@@ -458,53 +374,7 @@ static void test_blocking_connection(struct config config) {
               strcasecmp(reply->element[1]->str,"pong") == 0);
     freeReplyObject(reply);
 
-    disconnect(c, 0);
-}
-
-static void test_blocking_connection_timeouts(struct config config) {
-    redisContext *c;
-    redisReply *reply;
-    ssize_t s;
-    const char *cmd = "DEBUG SLEEP 3\r\n";
-    struct timeval tv;
-
-    c = connect(config);
-    test("Successfully completes a command when the timeout is not exceeded: ");
-    reply = redisCommand(c,"SET foo fast");
-    freeReplyObject(reply);
-    tv.tv_sec = 0;
-    tv.tv_usec = 10000;
-    redisSetTimeout(c, tv);
-    reply = redisCommand(c, "GET foo");
-    test_cond(reply != NULL && reply->type == REDIS_REPLY_STRING && memcmp(reply->str, "fast", 4) == 0);
-    freeReplyObject(reply);
-    disconnect(c, 0);
-
-    c = connect(config);
-    test("Does not return a reply when the command times out: ");
-    s = write(c->fd, cmd, strlen(cmd));
-    tv.tv_sec = 0;
-    tv.tv_usec = 10000;
-    redisSetTimeout(c, tv);
-    reply = redisCommand(c, "GET foo");
-    test_cond(s > 0 && reply == NULL && c->err == REDIS_ERR_IO && strcmp(c->errstr, "Resource temporarily unavailable") == 0);
-    freeReplyObject(reply);
-
-    test("Reconnect properly reconnects after a timeout: ");
-    redisReconnect(c);
-    reply = redisCommand(c, "PING");
-    test_cond(reply != NULL && reply->type == REDIS_REPLY_STATUS && strcmp(reply->str, "PONG") == 0);
-    freeReplyObject(reply);
-
-    test("Reconnect properly uses owned parameters: ");
-    config.tcp.host = "foo";
-    config.unix_sock.path = "foo";
-    redisReconnect(c);
-    reply = redisCommand(c, "PING");
-    test_cond(reply != NULL && reply->type == REDIS_REPLY_STATUS && strcmp(reply->str, "PONG") == 0);
-    freeReplyObject(reply);
-
-    disconnect(c, 0);
+    disconnect(c);
 }
 
 static void test_blocking_io_errors(struct config config) {
@@ -530,7 +400,7 @@ static void test_blocking_io_errors(struct config config) {
 
     test("Returns I/O error when the connection is lost: ");
     reply = redisCommand(c,"QUIT");
-    if (major > 2 || (major == 2 && minor > 0)) {
+    if (major >= 2 && minor > 0) {
         /* > 2.0 returns OK on QUIT and read() should be issued once more
          * to know the descriptor is at EOF. */
         test_cond(strcasecmp(reply->str,"OK") == 0 &&
@@ -558,30 +428,6 @@ static void test_blocking_io_errors(struct config config) {
     redisFree(c);
 }
 
-static void test_invalid_timeout_errors(struct config config) {
-    redisContext *c;
-
-    test("Set error when an invalid timeout usec value is given to redisConnectWithTimeout: ");
-
-    config.tcp.timeout.tv_sec = 0;
-    config.tcp.timeout.tv_usec = 10000001;
-
-    c = redisConnectWithTimeout(config.tcp.host, config.tcp.port, config.tcp.timeout);
-
-    test_cond(c->err == REDIS_ERR_IO && strcmp(c->errstr, "Invalid timeout specified") == 0);
-    redisFree(c);
-
-    test("Set error when an invalid timeout sec value is given to redisConnectWithTimeout: ");
-
-    config.tcp.timeout.tv_sec = (((LONG_MAX) - 999) / 1000) + 1;
-    config.tcp.timeout.tv_usec = 0;
-
-    c = redisConnectWithTimeout(config.tcp.host, config.tcp.port, config.tcp.timeout);
-
-    test_cond(c->err == REDIS_ERR_IO && strcmp(c->errstr, "Invalid timeout specified") == 0);
-    redisFree(c);
-}
-
 static void test_throughput(struct config config) {
     redisContext *c = connect(config);
     redisReply **replies;
@@ -644,7 +490,7 @@ static void test_throughput(struct config config) {
     free(replies);
     printf("\t(%dx LRANGE with 500 elements (pipelined): %.3fs)\n", num, (t2-t1)/1000000.0);
 
-    disconnect(c, 0);
+    disconnect(c);
 }
 
 // static long __test_callback_flags = 0;
@@ -752,12 +598,11 @@ int main(int argc, char **argv) {
             .host = "127.0.0.1",
             .port = 6379
         },
-        .unix_sock = {
+        .unix = {
             .path = "/tmp/redis.sock"
         }
     };
     int throughput = 1;
-    int test_inherit_fd = 1;
 
     /* Ignore broken pipe signal (for I/O error tests). */
     signal(SIGPIPE, SIG_IGN);
@@ -773,11 +618,9 @@ int main(int argc, char **argv) {
             cfg.tcp.port = atoi(argv[0]);
         } else if (argc >= 2 && !strcmp(argv[0],"-s")) {
             argv++; argc--;
-            cfg.unix_sock.path = argv[0];
+            cfg.unix.path = argv[0];
         } else if (argc >= 1 && !strcmp(argv[0],"--skip-throughput")) {
             throughput = 0;
-        } else if (argc >= 1 && !strcmp(argv[0],"--skip-inherit-fd")) {
-            test_inherit_fd = 0;
         } else {
             fprintf(stderr, "Invalid argument: %s\n", argv[0]);
             exit(1);
@@ -788,31 +631,19 @@ int main(int argc, char **argv) {
     test_format_commands();
     test_reply_reader();
     test_blocking_connection_errors();
-    test_free_null();
 
     printf("\nTesting against TCP connection (%s:%d):\n", cfg.tcp.host, cfg.tcp.port);
     cfg.type = CONN_TCP;
     test_blocking_connection(cfg);
-    test_blocking_connection_timeouts(cfg);
     test_blocking_io_errors(cfg);
-    test_invalid_timeout_errors(cfg);
-    test_append_formatted_commands(cfg);
     if (throughput) test_throughput(cfg);
 
-    printf("\nTesting against Unix socket connection (%s):\n", cfg.unix_sock.path);
+    printf("\nTesting against Unix socket connection (%s):\n", cfg.unix.path);
     cfg.type = CONN_UNIX;
     test_blocking_connection(cfg);
-    test_blocking_connection_timeouts(cfg);
     test_blocking_io_errors(cfg);
     if (throughput) test_throughput(cfg);
 
-    if (test_inherit_fd) {
-        printf("\nTesting against inherited fd (%s):\n", cfg.unix_sock.path);
-        cfg.type = CONN_FD;
-        test_blocking_connection(cfg);
-    }
-
-
     if (fails) {
         printf("*** %d TESTS FAILED ***\n", fails);
         return 1;

deps/hiredis/win32.h

@@ -1,42 +0,0 @@
-#ifndef _WIN32_HELPER_INCLUDE
-#define _WIN32_HELPER_INCLUDE
-#ifdef _MSC_VER
-
-#ifndef inline
-#define inline __inline
-#endif
-
-#ifndef va_copy
-#define va_copy(d,s) ((d) = (s))
-#endif
-
-#ifndef snprintf
-#define snprintf c99_snprintf
-
-__inline int c99_vsnprintf(char* str, size_t size, const char* format, va_list ap)
-{
-    int count = -1;
-
-    if (size != 0)
-        count = _vsnprintf_s(str, size, _TRUNCATE, format, ap);
-    if (count == -1)
-        count = _vscprintf(format, ap);
-
-    return count;
-}
-
-__inline int c99_snprintf(char* str, size_t size, const char* format, ...)
-{
-    int count;
-    va_list ap;
-
-    va_start(ap, format);
-    count = c99_vsnprintf(str, size, format, ap);
-    va_end(ap);
-
-    return count;
-}
-#endif
-
-#endif
-#endif

deps/jemalloc/.appveyor.yml

@@ -1,42 +0,0 @@
-version: '{build}'
-
-environment:
-  matrix:
-  - MSYSTEM: MINGW64
-    CPU: x86_64
-    MSVC: amd64
-  - MSYSTEM: MINGW32
-    CPU: i686
-    MSVC: x86
-  - MSYSTEM: MINGW64
-    CPU: x86_64
-  - MSYSTEM: MINGW32
-    CPU: i686
-  - MSYSTEM: MINGW64
-    CPU: x86_64
-    MSVC: amd64
-    CONFIG_FLAGS: --enable-debug
-  - MSYSTEM: MINGW32
-    CPU: i686
-    MSVC: x86
-    CONFIG_FLAGS: --enable-debug
-  - MSYSTEM: MINGW64
-    CPU: x86_64
-    CONFIG_FLAGS: --enable-debug
-  - MSYSTEM: MINGW32
-    CPU: i686
-    CONFIG_FLAGS: --enable-debug
-
-install:
-  - set PATH=c:\msys64\%MSYSTEM%\bin;c:\msys64\usr\bin;%PATH%
-  - if defined MSVC call "c:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\vcvarsall.bat" %MSVC%
-  - if defined MSVC pacman --noconfirm -Rsc mingw-w64-%CPU%-gcc gcc
-  - pacman --noconfirm -Suy mingw-w64-%CPU%-make
-
-build_script:
-  - bash -c "autoconf"
-  - bash -c "./configure $CONFIG_FLAGS"
-  - mingw32-make
-  - file lib/jemalloc.dll
-  - mingw32-make tests
-  - mingw32-make -k check

deps/jemalloc/.autom4te.cfg

@@ -1,3 +0,0 @@
-begin-language: "Autoconf-without-aclocal-m4"
-args: --no-cache
-end-language: "Autoconf-without-aclocal-m4"

deps/jemalloc/.gitattributes

@@ -1 +0,0 @@
-* text=auto eol=lf

deps/jemalloc/.gitignore

@@ -1,93 +1,25 @@
-/bin/jemalloc-config
-/bin/jemalloc.sh
-/bin/jeprof
-
+/autom4te.cache/
 /config.stamp
 /config.log
 /config.status
 /configure
-
 /doc/html.xsl
 /doc/manpages.xsl
 /doc/jemalloc.xml
 /doc/jemalloc.html
 /doc/jemalloc.3
-
-/jemalloc.pc
-
 /lib/
-
 /Makefile
-
-/include/jemalloc/internal/jemalloc_preamble.h
-/include/jemalloc/internal/jemalloc_internal_defs.h
-/include/jemalloc/internal/private_namespace.gen.h
-/include/jemalloc/internal/private_namespace.h
-/include/jemalloc/internal/private_namespace_jet.gen.h
-/include/jemalloc/internal/private_namespace_jet.h
-/include/jemalloc/internal/private_symbols.awk
-/include/jemalloc/internal/private_symbols_jet.awk
-/include/jemalloc/internal/public_namespace.h
-/include/jemalloc/internal/public_symbols.txt
-/include/jemalloc/internal/public_unnamespace.h
-/include/jemalloc/internal/size_classes.h
-/include/jemalloc/jemalloc.h
-/include/jemalloc/jemalloc_defs.h
-/include/jemalloc/jemalloc_macros.h
-/include/jemalloc/jemalloc_mangle.h
-/include/jemalloc/jemalloc_mangle_jet.h
-/include/jemalloc/jemalloc_protos.h
-/include/jemalloc/jemalloc_protos_jet.h
-/include/jemalloc/jemalloc_rename.h
-/include/jemalloc/jemalloc_typedefs.h
-
+/include/jemalloc/internal/jemalloc_internal\.h
+/include/jemalloc/internal/size_classes\.h
+/include/jemalloc/jemalloc\.h
+/include/jemalloc/jemalloc_defs\.h
+/test/jemalloc_test\.h
 /src/*.[od]
-/src/*.sym
-
-/run_tests.out/
-
-/test/test.sh
-test/include/test/jemalloc_test.h
-test/include/test/jemalloc_test_defs.h
-
-/test/integration/[A-Za-z]*
-!/test/integration/[A-Za-z]*.*
-/test/integration/*.[od]
-/test/integration/*.out
-
-/test/integration/cpp/[A-Za-z]*
-!/test/integration/cpp/[A-Za-z]*.*
-/test/integration/cpp/*.[od]
-/test/integration/cpp/*.out
-
-/test/src/*.[od]
-
-/test/stress/[A-Za-z]*
-!/test/stress/[A-Za-z]*.*
-/test/stress/*.[od]
-/test/stress/*.out
-
-/test/unit/[A-Za-z]*
-!/test/unit/[A-Za-z]*.*
-/test/unit/*.[od]
-/test/unit/*.out
-
+/test/*.[od]
+/test/*.out
+/test/[a-zA-Z_]*
+!test/*.c
+!test/*.exp
 /VERSION
-
-*.pdb
-*.sdf
-*.opendb
-*.VC.db
-*.opensdf
-*.cachefile
-*.suo
-*.user
-*.sln.docstates
-*.tmp
-.vs/
-/msvc/Win32/
-/msvc/x64/
-/msvc/projects/*/*/Debug*/
-/msvc/projects/*/*/Release*/
-/msvc/projects/*/*/Win32/
-/msvc/projects/*/*/x64/
+/bin/jemalloc.sh

deps/jemalloc/.travis.yml

@@ -1,156 +0,0 @@
-language: generic
-dist: precise
-
-matrix:
-  include:
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: osx
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-prof" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--disable-stats" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=tcache:false" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=dss:primary" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: osx
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: osx
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: osx
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: osx
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--disable-stats" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: osx
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=tcache:false" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-prof" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--disable-stats" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=tcache:false" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=dss:primary" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=clang CXX=clang++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="--enable-debug" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="--enable-prof" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="--disable-stats" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="--with-malloc-conf=tcache:false" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="--with-malloc-conf=dss:primary" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="--with-malloc-conf=percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="-m32" CONFIGURE_FLAGS="--with-malloc-conf=background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-      addons:
-        apt:
-          packages:
-            - gcc-multilib
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug --enable-prof" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug --disable-stats" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug --with-malloc-conf=tcache:false" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug --with-malloc-conf=dss:primary" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug --with-malloc-conf=percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-debug --with-malloc-conf=background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-prof --disable-stats" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-prof --with-malloc-conf=tcache:false" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-prof --with-malloc-conf=dss:primary" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-prof --with-malloc-conf=percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--enable-prof --with-malloc-conf=background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--disable-stats --with-malloc-conf=tcache:false" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--disable-stats --with-malloc-conf=dss:primary" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--disable-stats --with-malloc-conf=percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--disable-stats --with-malloc-conf=background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=tcache:false,dss:primary" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=tcache:false,percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=tcache:false,background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=dss:primary,percpu_arena:percpu" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=dss:primary,background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-    - os: linux
-      env: CC=gcc CXX=g++ COMPILER_FLAGS="" CONFIGURE_FLAGS="--with-malloc-conf=percpu_arena:percpu,background_thread:true" EXTRA_CFLAGS="-Werror -Wno-array-bounds"
-
-
-before_script:
-  - autoconf
-  - ./configure ${COMPILER_FLAGS:+       CC="$CC $COMPILER_FLAGS"       CXX="$CXX $COMPILER_FLAGS" }       $CONFIGURE_FLAGS
-  - make -j3
-  - make -j3 tests
-
-script:
-  - make check
-

deps/jemalloc/COPYING

@@ -1,10 +1,10 @@
 Unless otherwise specified, files in the jemalloc source distribution are
 subject to the following license:
 --------------------------------------------------------------------------------
-Copyright (C) 2002-2018 Jason Evans <jasone@canonware.com>.
+Copyright (C) 2002-2012 Jason Evans <jasone@canonware.com>.
 All rights reserved.
 Copyright (C) 2007-2012 Mozilla Foundation.  All rights reserved.
-Copyright (C) 2009-2018 Facebook, Inc.  All rights reserved.
+Copyright (C) 2009-2012 Facebook, Inc.  All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:

deps/jemalloc/INSTALL

@@ -0,0 +1,278 @@
+Building and installing jemalloc can be as simple as typing the following while
+in the root directory of the source tree:
+
+    ./configure
+    make
+    make install
+
+=== Advanced configuration =====================================================
+
+The 'configure' script supports numerous options that allow control of which
+functionality is enabled, where jemalloc is installed, etc.  Optionally, pass
+any of the following arguments (not a definitive list) to 'configure':
+
+--help
+    Print a definitive list of options.
+
+--prefix=<install-root-dir>
+    Set the base directory in which to install.  For example:
+
+        ./configure --prefix=/usr/local
+
+    will cause files to be installed into /usr/local/include, /usr/local/lib,
+    and /usr/local/man.
+
+--with-rpath=<colon-separated-rpath>
+    Embed one or more library paths, so that libjemalloc can find the libraries
+    it is linked to.  This works only on ELF-based systems.
+
+--with-mangling=<map>
+    Mangle public symbols specified in <map> which is a comma-separated list of
+    name:mangled pairs.
+
+    For example, to use ld's --wrap option as an alternative method for
+    overriding libc's malloc implementation, specify something like:
+
+      --with-mangling=malloc:__wrap_malloc,free:__wrap_free[...]
+
+    Note that mangling happens prior to application of the prefix specified by
+    --with-jemalloc-prefix, and mangled symbols are then ignored when applying
+    the prefix.
+
+--with-jemalloc-prefix=<prefix>
+    Prefix all public APIs with <prefix>.  For example, if <prefix> is
+    "prefix_", API changes like the following occur:
+
+      malloc()         --> prefix_malloc()
+      malloc_conf      --> prefix_malloc_conf
+      /etc/malloc.conf --> /etc/prefix_malloc.conf
+      MALLOC_CONF      --> PREFIX_MALLOC_CONF
+
+    This makes it possible to use jemalloc at the same time as the system
+    allocator, or even to use multiple copies of jemalloc simultaneously.
+
+    By default, the prefix is "", except on OS X, where it is "je_".  On OS X,
+    jemalloc overlays the default malloc zone, but makes no attempt to actually
+    replace the "malloc", "calloc", etc. symbols.
+
+--with-private-namespace=<prefix>
+    Prefix all library-private APIs with <prefix>.  For shared libraries,
+    symbol visibility mechanisms prevent these symbols from being exported, but
+    for static libraries, naming collisions are a real possibility.  By
+    default, the prefix is "" (empty string).
+
+--with-install-suffix=<suffix>
+    Append <suffix> to the base name of all installed files, such that multiple
+    versions of jemalloc can coexist in the same installation directory.  For
+    example, libjemalloc.so.0 becomes libjemalloc<suffix>.so.0.
+
+--enable-cc-silence
+    Enable code that silences non-useful compiler warnings.  This is helpful
+    when trying to tell serious warnings from those due to compiler
+    limitations, but it potentially incurs a performance penalty.
+
+--enable-debug
+    Enable assertions and validation code.  This incurs a substantial
+    performance hit, but is very useful during application development.
+
+--disable-stats
+    Disable statistics gathering functionality.  See the "opt.stats_print"
+    option documentation for usage details.
+
+--enable-prof
+    Enable heap profiling and leak detection functionality.  See the "opt.prof"
+    option documentation for usage details.  When enabled, there are several
+    approaches to backtracing, and the configure script chooses the first one
+    in the following list that appears to function correctly:
+
+    + libunwind      (requires --enable-prof-libunwind)
+    + libgcc         (unless --disable-prof-libgcc)
+    + gcc intrinsics (unless --disable-prof-gcc)
+
+--enable-prof-libunwind
+    Use the libunwind library (http://www.nongnu.org/libunwind/) for stack
+    backtracing.
+
+--disable-prof-libgcc
+    Disable the use of libgcc's backtracing functionality.
+
+--disable-prof-gcc
+    Disable the use of gcc intrinsics for backtracing.
+
+--with-static-libunwind=<libunwind.a>
+    Statically link against the specified libunwind.a rather than dynamically
+    linking with -lunwind.
+
+--disable-tcache
+    Disable thread-specific caches for small objects.  Objects are cached and
+    released in bulk, thus reducing the total number of mutex operations.  See
+    the "opt.tcache" option for usage details.
+
+--enable-mremap
+    Enable huge realloc() via mremap(2).  mremap() is disabled by default
+    because the flavor used is specific to Linux, which has a quirk in its
+    virtual memory allocation algorithm that causes semi-permanent VM map holes
+    under normal jemalloc operation.
+
+--disable-munmap
+    Disable virtual memory deallocation via munmap(2); instead keep track of
+    the virtual memory for later use.  munmap() is disabled by default (i.e.
+    --disable-munmap is implied) on Linux, which has a quirk in its virtual
+    memory allocation algorithm that causes semi-permanent VM map holes under
+    normal jemalloc operation.
+
+--enable-dss
+    Enable support for page allocation/deallocation via sbrk(2), in addition to
+    mmap(2).
+
+--disable-fill
+    Disable support for junk/zero filling of memory, quarantine, and redzones.
+    See the "opt.junk", "opt.zero", "opt.quarantine", and "opt.redzone" option
+    documentation for usage details.
+
+--disable-valgrind
+    Disable support for Valgrind.
+
+--disable-experimental
+    Disable support for the experimental API (*allocm()).
+
+--enable-utrace
+    Enable utrace(2)-based allocation tracing.  This feature is not broadly
+    portable (FreeBSD has it, but Linux and OS X do not).
+
+--enable-xmalloc
+    Enable support for optional immediate termination due to out-of-memory
+    errors, as is commonly implemented by "xmalloc" wrapper function for malloc.
+    See the "opt.xmalloc" option documentation for usage details.
+
+--enable-lazy-lock
+    Enable code that wraps pthread_create() to detect when an application
+    switches from single-threaded to multi-threaded mode, so that it can avoid
+    mutex locking/unlocking operations while in single-threaded mode.  In
+    practice, this feature usually has little impact on performance unless
+    thread-specific caching is disabled.
+
+--disable-tls
+    Disable thread-local storage (TLS), which allows for fast access to
+    thread-local variables via the __thread keyword.  If TLS is available,
+    jemalloc uses it for several purposes.
+
+--with-xslroot=<path>
+    Specify where to find DocBook XSL stylesheets when building the
+    documentation.
+
+The following environment variables (not a definitive list) impact configure's
+behavior:
+
+CFLAGS="?"
+    Pass these flags to the compiler.  You probably shouldn't define this unless
+    you know what you are doing.  (Use EXTRA_CFLAGS instead.)
+
+EXTRA_CFLAGS="?"
+    Append these flags to CFLAGS.  This makes it possible to add flags such as
+    -Werror, while allowing the configure script to determine what other flags
+    are appropriate for the specified configuration.
+
+    The configure script specifically checks whether an optimization flag (-O*)
+    is specified in EXTRA_CFLAGS, and refrains from specifying an optimization
+    level if it finds that one has already been specified.
+
+CPPFLAGS="?"
+    Pass these flags to the C preprocessor.  Note that CFLAGS is not passed to
+    'cpp' when 'configure' is looking for include files, so you must use
+    CPPFLAGS instead if you need to help 'configure' find header files.
+
+LD_LIBRARY_PATH="?"
+    'ld' uses this colon-separated list to find libraries.
+
+LDFLAGS="?"
+    Pass these flags when linking.
+
+PATH="?"
+    'configure' uses this to find programs.
+
+=== Advanced compilation =======================================================
+
+To build only parts of jemalloc, use the following targets:
+
+    build_lib_shared
+    build_lib_static
+    build_lib
+    build_doc_html
+    build_doc_man
+    build_doc
+
+To install only parts of jemalloc, use the following targets:
+
+    install_bin
+    install_include
+    install_lib_shared
+    install_lib_static
+    install_lib
+    install_doc_html
+    install_doc_man
+    install_doc
+
+To clean up build results to varying degrees, use the following make targets:
+
+    clean
+    distclean
+    relclean
+
+=== Advanced installation ======================================================
+
+Optionally, define make variables when invoking make, including (not
+exclusively):
+
+INCLUDEDIR="?"
+    Use this as the installation prefix for header files.
+
+LIBDIR="?"
+    Use this as the installation prefix for libraries.
+
+MANDIR="?"
+    Use this as the installation prefix for man pages.
+
+DESTDIR="?"
+    Prepend DESTDIR to INCLUDEDIR, LIBDIR, DATADIR, and MANDIR.  This is useful
+    when installing to a different path than was specified via --prefix.
+
+CC="?"
+    Use this to invoke the C compiler.
+
+CFLAGS="?"
+    Pass these flags to the compiler.
+
+CPPFLAGS="?"
+    Pass these flags to the C preprocessor.
+
+LDFLAGS="?"
+    Pass these flags when linking.
+
+PATH="?"
+    Use this to search for programs used during configuration and building.
+
+=== Development ================================================================
+
+If you intend to make non-trivial changes to jemalloc, use the 'autogen.sh'
+script rather than 'configure'.  This re-generates 'configure', enables
+configuration dependency rules, and enables re-generation of automatically
+generated source files.
+
+The build system supports using an object directory separate from the source
+tree.  For example, you can create an 'obj' directory, and from within that
+directory, issue configuration and build commands:
+
+    autoconf
+    mkdir obj
+    cd obj
+    ../configure --enable-autogen
+    make
+
+=== Documentation ==============================================================
+
+The manual page is generated in both html and roff formats.  Any web browser
+can be used to view the html manual.  The roff manual page can be formatted
+prior to installation via the following command:
+
+    nroff -man -t doc/jemalloc.3

deps/jemalloc/INSTALL.md

@@ -1,423 +0,0 @@
-Building and installing a packaged release of jemalloc can be as simple as
-typing the following while in the root directory of the source tree:
-
-    ./configure
-    make
-    make install
-
-If building from unpackaged developer sources, the simplest command sequence
-that might work is:
-
-    ./autogen.sh
-    make dist
-    make
-    make install
-
-Note that documentation is not built by the default target because doing so
-would create a dependency on xsltproc in packaged releases, hence the
-requirement to either run 'make dist' or avoid installing docs via the various
-install_* targets documented below.
-
-
-## Advanced configuration
-
-The 'configure' script supports numerous options that allow control of which
-functionality is enabled, where jemalloc is installed, etc.  Optionally, pass
-any of the following arguments (not a definitive list) to 'configure':
-
-* `--help`
-
-    Print a definitive list of options.
-
-* `--prefix=<install-root-dir>`
-
-    Set the base directory in which to install.  For example:
-
-        ./configure --prefix=/usr/local
-
-    will cause files to be installed into /usr/local/include, /usr/local/lib,
-    and /usr/local/man.
-
-* `--with-version=(<major>.<minor>.<bugfix>-<nrev>-g<gid>|VERSION)`
-
-    The VERSION file is mandatory for successful configuration, and the
-    following steps are taken to assure its presence:
-    1) If --with-version=<major>.<minor>.<bugfix>-<nrev>-g<gid> is specified,
-       generate VERSION using the specified value.
-    2) If --with-version is not specified in either form and the source
-       directory is inside a git repository, try to generate VERSION via 'git
-       describe' invocations that pattern-match release tags.
-    3) If VERSION is missing, generate it with a bogus version:
-       0.0.0-0-g0000000000000000000000000000000000000000
-
-    Note that --with-version=VERSION bypasses (1) and (2), which simplifies
-    VERSION configuration when embedding a jemalloc release into another
-    project's git repository.
-
-* `--with-rpath=<colon-separated-rpath>`
-
-    Embed one or more library paths, so that libjemalloc can find the libraries
-    it is linked to.  This works only on ELF-based systems.
-
-* `--with-mangling=<map>`
-
-    Mangle public symbols specified in <map> which is a comma-separated list of
-    name:mangled pairs.
-
-    For example, to use ld's --wrap option as an alternative method for
-    overriding libc's malloc implementation, specify something like:
-
-      --with-mangling=malloc:__wrap_malloc,free:__wrap_free[...]
-
-    Note that mangling happens prior to application of the prefix specified by
-    --with-jemalloc-prefix, and mangled symbols are then ignored when applying
-    the prefix.
-
-* `--with-jemalloc-prefix=<prefix>`
-
-    Prefix all public APIs with <prefix>.  For example, if <prefix> is
-    "prefix_", API changes like the following occur:
-
-      malloc()         --> prefix_malloc()
-      malloc_conf      --> prefix_malloc_conf
-      /etc/malloc.conf --> /etc/prefix_malloc.conf
-      MALLOC_CONF      --> PREFIX_MALLOC_CONF
-
-    This makes it possible to use jemalloc at the same time as the system
-    allocator, or even to use multiple copies of jemalloc simultaneously.
-
-    By default, the prefix is "", except on OS X, where it is "je_".  On OS X,
-    jemalloc overlays the default malloc zone, but makes no attempt to actually
-    replace the "malloc", "calloc", etc. symbols.
-
-* `--without-export`
-
-    Don't export public APIs.  This can be useful when building jemalloc as a
-    static library, or to avoid exporting public APIs when using the zone
-    allocator on OSX.
-
-* `--with-private-namespace=<prefix>`
-
-    Prefix all library-private APIs with <prefix>je_.  For shared libraries,
-    symbol visibility mechanisms prevent these symbols from being exported, but
-    for static libraries, naming collisions are a real possibility.  By
-    default, <prefix> is empty, which results in a symbol prefix of je_ .
-
-* `--with-install-suffix=<suffix>`
-
-    Append <suffix> to the base name of all installed files, such that multiple
-    versions of jemalloc can coexist in the same installation directory.  For
-    example, libjemalloc.so.0 becomes libjemalloc<suffix>.so.0.
-
-* `--with-malloc-conf=<malloc_conf>`
-
-    Embed `<malloc_conf>` as a run-time options string that is processed prior to
-    the malloc_conf global variable, the /etc/malloc.conf symlink, and the
-    MALLOC_CONF environment variable.  For example, to change the default decay
-    time to 30 seconds:
-
-      --with-malloc-conf=decay_ms:30000
-
-* `--enable-debug`
-
-    Enable assertions and validation code.  This incurs a substantial
-    performance hit, but is very useful during application development.
-
-* `--disable-stats`
-
-    Disable statistics gathering functionality.  See the "opt.stats_print"
-    option documentation for usage details.
-
-* `--enable-prof`
-
-    Enable heap profiling and leak detection functionality.  See the "opt.prof"
-    option documentation for usage details.  When enabled, there are several
-    approaches to backtracing, and the configure script chooses the first one
-    in the following list that appears to function correctly:
-
-    + libunwind      (requires --enable-prof-libunwind)
-    + libgcc         (unless --disable-prof-libgcc)
-    + gcc intrinsics (unless --disable-prof-gcc)
-
-* `--enable-prof-libunwind`
-
-    Use the libunwind library (http://www.nongnu.org/libunwind/) for stack
-    backtracing.
-
-* `--disable-prof-libgcc`
-
-    Disable the use of libgcc's backtracing functionality.
-
-* `--disable-prof-gcc`
-
-    Disable the use of gcc intrinsics for backtracing.
-
-* `--with-static-libunwind=<libunwind.a>`
-
-    Statically link against the specified libunwind.a rather than dynamically
-    linking with -lunwind.
-
-* `--disable-fill`
-
-    Disable support for junk/zero filling of memory.  See the "opt.junk" and
-    "opt.zero" option documentation for usage details.
-
-* `--disable-zone-allocator`
-
-    Disable zone allocator for Darwin.  This means jemalloc won't be hooked as
-    the default allocator on OSX/iOS.
-
-* `--enable-utrace`
-
-    Enable utrace(2)-based allocation tracing.  This feature is not broadly
-    portable (FreeBSD has it, but Linux and OS X do not).
-
-* `--enable-xmalloc`
-
-    Enable support for optional immediate termination due to out-of-memory
-    errors, as is commonly implemented by "xmalloc" wrapper function for malloc.
-    See the "opt.xmalloc" option documentation for usage details.
-
-* `--enable-lazy-lock`
-
-    Enable code that wraps pthread_create() to detect when an application
-    switches from single-threaded to multi-threaded mode, so that it can avoid
-    mutex locking/unlocking operations while in single-threaded mode.  In
-    practice, this feature usually has little impact on performance unless
-    thread-specific caching is disabled.
-
-* `--disable-cache-oblivious`
-
-    Disable cache-oblivious large allocation alignment for large allocation
-    requests with no alignment constraints.  If this feature is disabled, all
-    large allocations are page-aligned as an implementation artifact, which can
-    severely harm CPU cache utilization.  However, the cache-oblivious layout
-    comes at the cost of one extra page per large allocation, which in the
-    most extreme case increases physical memory usage for the 16 KiB size class
-    to 20 KiB.
-
-* `--disable-syscall`
-
-    Disable use of syscall(2) rather than {open,read,write,close}(2).  This is
-    intended as a workaround for systems that place security limitations on
-    syscall(2).
-
-* `--disable-cxx`
-
-    Disable C++ integration.  This will cause new and delete operator
-    implementations to be omitted.
-
-* `--with-xslroot=<path>`
-
-    Specify where to find DocBook XSL stylesheets when building the
-    documentation.
-
-* `--with-lg-page=<lg-page>`
-
-    Specify the base 2 log of the allocator page size, which must in turn be at
-    least as large as the system page size.  By default the configure script
-    determines the host's page size and sets the allocator page size equal to
-    the system page size, so this option need not be specified unless the
-    system page size may change between configuration and execution, e.g. when
-    cross compiling.
-
-* `--with-lg-page-sizes=<lg-page-sizes>`
-
-    Specify the comma-separated base 2 logs of the page sizes to support.  This
-    option may be useful when cross compiling in combination with
-    `--with-lg-page`, but its primary use case is for integration with FreeBSD's
-    libc, wherein jemalloc is embedded.
-
-* `--with-lg-hugepage=<lg-hugepage>`
-
-    Specify the base 2 log of the system huge page size.  This option is useful
-    when cross compiling, or when overriding the default for systems that do
-    not explicitly support huge pages.
-
-* `--with-lg-quantum=<lg-quantum>`
-
-    Specify the base 2 log of the minimum allocation alignment.  jemalloc needs
-    to know the minimum alignment that meets the following C standard
-    requirement (quoted from the April 12, 2011 draft of the C11 standard):
-
-    >  The pointer returned if the allocation succeeds is suitably aligned so
-      that it may be assigned to a pointer to any type of object with a
-      fundamental alignment requirement and then used to access such an object
-      or an array of such objects in the space allocated [...]
-
-    This setting is architecture-specific, and although jemalloc includes known
-    safe values for the most commonly used modern architectures, there is a
-    wrinkle related to GNU libc (glibc) that may impact your choice of
-    <lg-quantum>.  On most modern architectures, this mandates 16-byte
-    alignment (<lg-quantum>=4), but the glibc developers chose not to meet this
-    requirement for performance reasons.  An old discussion can be found at
-    <https://sourceware.org/bugzilla/show_bug.cgi?id=206> .  Unlike glibc,
-    jemalloc does follow the C standard by default (caveat: jemalloc
-    technically cheats for size classes smaller than the quantum), but the fact
-    that Linux systems already work around this allocator noncompliance means
-    that it is generally safe in practice to let jemalloc's minimum alignment
-    follow glibc's lead.  If you specify `--with-lg-quantum=3` during
-    configuration, jemalloc will provide additional size classes that are not
-    16-byte-aligned (24, 40, and 56).
-
-* `--with-lg-vaddr=<lg-vaddr>`
-
-    Specify the number of significant virtual address bits.  By default, the
-    configure script attempts to detect virtual address size on those platforms
-    where it knows how, and picks a default otherwise.  This option may be
-    useful when cross-compiling.
-
-* `--disable-initial-exec-tls`
-
-    Disable the initial-exec TLS model for jemalloc's internal thread-local
-    storage (on those platforms that support explicit settings).  This can allow
-    jemalloc to be dynamically loaded after program startup (e.g. using dlopen).
-    Note that in this case, there will be two malloc implementations operating
-    in the same process, which will almost certainly result in confusing runtime
-    crashes if pointers leak from one implementation to the other.
-
-The following environment variables (not a definitive list) impact configure's
-behavior:
-
-* `CFLAGS="?"`
-* `CXXFLAGS="?"`
-
-    Pass these flags to the C/C++ compiler.  Any flags set by the configure
-    script are prepended, which means explicitly set flags generally take
-    precedence.  Take care when specifying flags such as -Werror, because
-    configure tests may be affected in undesirable ways.
-
-* `EXTRA_CFLAGS="?"`
-* `EXTRA_CXXFLAGS="?"`
-
-    Append these flags to CFLAGS/CXXFLAGS, without passing them to the
-    compiler(s) during configuration.  This makes it possible to add flags such
-    as -Werror, while allowing the configure script to determine what other
-    flags are appropriate for the specified configuration.
-
-* `CPPFLAGS="?"`
-
-    Pass these flags to the C preprocessor.  Note that CFLAGS is not passed to
-    'cpp' when 'configure' is looking for include files, so you must use
-    CPPFLAGS instead if you need to help 'configure' find header files.
-
-* `LD_LIBRARY_PATH="?"`
-
-    'ld' uses this colon-separated list to find libraries.
-
-* `LDFLAGS="?"`
-
-    Pass these flags when linking.
-
-* `PATH="?"`
-
-    'configure' uses this to find programs.
-
-In some cases it may be necessary to work around configuration results that do
-not match reality.  For example, Linux 4.5 added support for the MADV_FREE flag
-to madvise(2), which can cause problems if building on a host with MADV_FREE
-support and deploying to a target without.  To work around this, use a cache
-file to override the relevant configuration variable defined in configure.ac,
-e.g.:
-
-    echo "je_cv_madv_free=no" > config.cache && ./configure -C
-
-
-## Advanced compilation
-
-To build only parts of jemalloc, use the following targets:
-
-    build_lib_shared
-    build_lib_static
-    build_lib
-    build_doc_html
-    build_doc_man
-    build_doc
-
-To install only parts of jemalloc, use the following targets:
-
-    install_bin
-    install_include
-    install_lib_shared
-    install_lib_static
-    install_lib_pc
-    install_lib
-    install_doc_html
-    install_doc_man
-    install_doc
-
-To clean up build results to varying degrees, use the following make targets:
-
-    clean
-    distclean
-    relclean
-
-
-## Advanced installation
-
-Optionally, define make variables when invoking make, including (not
-exclusively):
-
-* `INCLUDEDIR="?"`
-
-    Use this as the installation prefix for header files.
-
-* `LIBDIR="?"`
-
-    Use this as the installation prefix for libraries.
-
-* `MANDIR="?"`
-
-    Use this as the installation prefix for man pages.
-
-* `DESTDIR="?"`
-
-    Prepend DESTDIR to INCLUDEDIR, LIBDIR, DATADIR, and MANDIR.  This is useful
-    when installing to a different path than was specified via --prefix.
-
-* `CC="?"`
-
-    Use this to invoke the C compiler.
-
-* `CFLAGS="?"`
-
-    Pass these flags to the compiler.
-
-* `CPPFLAGS="?"`
-
-    Pass these flags to the C preprocessor.
-
-* `LDFLAGS="?"`
-
-    Pass these flags when linking.
-
-* `PATH="?"`
-
-    Use this to search for programs used during configuration and building.
-
-
-## Development
-
-If you intend to make non-trivial changes to jemalloc, use the 'autogen.sh'
-script rather than 'configure'.  This re-generates 'configure', enables
-configuration dependency rules, and enables re-generation of automatically
-generated source files.
-
-The build system supports using an object directory separate from the source
-tree.  For example, you can create an 'obj' directory, and from within that
-directory, issue configuration and build commands:
-
-    autoconf
-    mkdir obj
-    cd obj
-    ../configure --enable-autogen
-    make
-
-
-## Documentation
-
-The manual page is generated in both html and roff formats.  Any web browser
-can be used to view the html manual.  The roff manual page can be formatted
-prior to installation via the following command:
-
-    nroff -man -t doc/jemalloc.3

deps/jemalloc/Makefile.in

@@ -9,7 +9,6 @@ vpath % .
 SHELL := /bin/sh
 
 CC := @CC@
-CXX := @CXX@
 
 # Configuration parameters.
 DESTDIR =
@@ -24,15 +23,8 @@ abs_srcroot := @abs_srcroot@
 abs_objroot := @abs_objroot@
 
 # Build parameters.
-CPPFLAGS := @CPPFLAGS@ -I$(objroot)include -I$(srcroot)include
-CONFIGURE_CFLAGS := @CONFIGURE_CFLAGS@
-SPECIFIED_CFLAGS := @SPECIFIED_CFLAGS@
-EXTRA_CFLAGS := @EXTRA_CFLAGS@
-CFLAGS := $(strip $(CONFIGURE_CFLAGS) $(SPECIFIED_CFLAGS) $(EXTRA_CFLAGS))
-CONFIGURE_CXXFLAGS := @CONFIGURE_CXXFLAGS@
-SPECIFIED_CXXFLAGS := @SPECIFIED_CXXFLAGS@
-EXTRA_CXXFLAGS := @EXTRA_CXXFLAGS@
-CXXFLAGS := $(strip $(CONFIGURE_CXXFLAGS) $(SPECIFIED_CXXFLAGS) $(EXTRA_CXXFLAGS))
+CPPFLAGS := @CPPFLAGS@ -I$(srcroot)include -I$(objroot)include
+CFLAGS := @CFLAGS@
 LDFLAGS := @LDFLAGS@
 EXTRA_LDFLAGS := @EXTRA_LDFLAGS@
 LIBS := @LIBS@
@@ -50,29 +42,19 @@ XSLTPROC := @XSLTPROC@
 AUTOCONF := @AUTOCONF@
 _RPATH = @RPATH@
 RPATH = $(if $(1),$(call _RPATH,$(1)))
-cfghdrs_in := $(addprefix $(srcroot),@cfghdrs_in@)
+cfghdrs_in := @cfghdrs_in@
 cfghdrs_out := @cfghdrs_out@
-cfgoutputs_in := $(addprefix $(srcroot),@cfgoutputs_in@)
+cfgoutputs_in := @cfgoutputs_in@
 cfgoutputs_out := @cfgoutputs_out@
 enable_autogen := @enable_autogen@
-enable_prof := @enable_prof@
-enable_zone_allocator := @enable_zone_allocator@
-MALLOC_CONF := @JEMALLOC_CPREFIX@MALLOC_CONF
-link_whole_archive := @link_whole_archive@
+enable_experimental := @enable_experimental@
 DSO_LDFLAGS = @DSO_LDFLAGS@
 SOREV = @SOREV@
 PIC_CFLAGS = @PIC_CFLAGS@
 CTARGET = @CTARGET@
 LDTARGET = @LDTARGET@
-TEST_LD_MODE = @TEST_LD_MODE@
 MKLIB = @MKLIB@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-DUMP_SYMS = @DUMP_SYMS@
-AWK := @AWK@
 CC_MM = @CC_MM@
-LM := @LM@
-INSTALL = @INSTALL@
 
 ifeq (macho, $(ABI))
 TEST_LIBRARY_PATH := DYLD_FALLBACK_LIBRARY_PATH="$(objroot)lib"
@@ -87,40 +69,19 @@ endif
 LIBJEMALLOC := $(LIBPREFIX)jemalloc$(install_suffix)
 
 # Lists of files.
-BINS := $(objroot)bin/jemalloc-config $(objroot)bin/jemalloc.sh $(objroot)bin/jeprof
-C_HDRS := $(objroot)include/jemalloc/jemalloc$(install_suffix).h
-C_SRCS := $(srcroot)src/jemalloc.c \
-	$(srcroot)src/arena.c \
-	$(srcroot)src/background_thread.c \
-	$(srcroot)src/base.c \
-	$(srcroot)src/bin.c \
-	$(srcroot)src/bitmap.c \
-	$(srcroot)src/ckh.c \
-	$(srcroot)src/ctl.c \
-	$(srcroot)src/div.c \
-	$(srcroot)src/extent.c \
-	$(srcroot)src/extent_dss.c \
-	$(srcroot)src/extent_mmap.c \
-	$(srcroot)src/hash.c \
-	$(srcroot)src/hooks.c \
-	$(srcroot)src/large.c \
-	$(srcroot)src/log.c \
-	$(srcroot)src/malloc_io.c \
-	$(srcroot)src/mutex.c \
-	$(srcroot)src/mutex_pool.c \
-	$(srcroot)src/nstime.c \
-	$(srcroot)src/pages.c \
-	$(srcroot)src/prng.c \
-	$(srcroot)src/prof.c \
-	$(srcroot)src/rtree.c \
-	$(srcroot)src/stats.c \
-	$(srcroot)src/sz.c \
-	$(srcroot)src/tcache.c \
-	$(srcroot)src/ticker.c \
-	$(srcroot)src/tsd.c \
-	$(srcroot)src/witness.c
-ifeq ($(enable_zone_allocator), 1)
-C_SRCS += $(srcroot)src/zone.c
+BINS := $(srcroot)bin/pprof $(objroot)bin/jemalloc.sh
+CHDRS := $(objroot)include/jemalloc/jemalloc$(install_suffix).h \
+	$(objroot)include/jemalloc/jemalloc_defs$(install_suffix).h
+CSRCS := $(srcroot)src/jemalloc.c $(srcroot)src/arena.c $(srcroot)src/atomic.c \
+	$(srcroot)src/base.c $(srcroot)src/bitmap.c $(srcroot)src/chunk.c \
+	$(srcroot)src/chunk_dss.c $(srcroot)src/chunk_mmap.c \
+	$(srcroot)src/ckh.c $(srcroot)src/ctl.c $(srcroot)src/extent.c \
+	$(srcroot)src/hash.c $(srcroot)src/huge.c $(srcroot)src/mb.c \
+	$(srcroot)src/mutex.c $(srcroot)src/prof.c $(srcroot)src/quarantine.c \
+	$(srcroot)src/rtree.c $(srcroot)src/stats.c $(srcroot)src/tcache.c \
+	$(srcroot)src/util.c $(srcroot)src/tsd.c
+ifeq (macho, $(ABI))
+CSRCS += $(srcroot)src/zone.c
 endif
 ifeq ($(IMPORTLIB),$(SO))
 STATIC_LIBS := $(objroot)lib/$(LIBJEMALLOC).$(A)
@@ -134,149 +95,39 @@ DSOS := $(objroot)lib/$(LIBJEMALLOC).$(SOREV)
 ifneq ($(SOREV),$(SO))
 DSOS += $(objroot)lib/$(LIBJEMALLOC).$(SO)
 endif
-ifeq (1, $(link_whole_archive))
-LJEMALLOC := -Wl,--whole-archive -L$(objroot)lib -l$(LIBJEMALLOC) -Wl,--no-whole-archive
-else
-LJEMALLOC := $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
-endif
-PC := $(objroot)jemalloc.pc
 MAN3 := $(objroot)doc/jemalloc$(install_suffix).3
 DOCS_XML := $(objroot)doc/jemalloc$(install_suffix).xml
-DOCS_HTML := $(DOCS_XML:$(objroot)%.xml=$(objroot)%.html)
-DOCS_MAN3 := $(DOCS_XML:$(objroot)%.xml=$(objroot)%.3)
+DOCS_HTML := $(DOCS_XML:$(objroot)%.xml=$(srcroot)%.html)
+DOCS_MAN3 := $(DOCS_XML:$(objroot)%.xml=$(srcroot)%.3)
 DOCS := $(DOCS_HTML) $(DOCS_MAN3)
-C_TESTLIB_SRCS := $(srcroot)test/src/btalloc.c $(srcroot)test/src/btalloc_0.c \
-	$(srcroot)test/src/btalloc_1.c $(srcroot)test/src/math.c \
-	$(srcroot)test/src/mtx.c $(srcroot)test/src/mq.c \
-	$(srcroot)test/src/SFMT.c $(srcroot)test/src/test.c \
-	$(srcroot)test/src/thd.c $(srcroot)test/src/timer.c
-ifeq (1, $(link_whole_archive))
-C_UTIL_INTEGRATION_SRCS :=
-C_UTIL_CPP_SRCS :=
-else
-C_UTIL_INTEGRATION_SRCS := $(srcroot)src/nstime.c $(srcroot)src/malloc_io.c
-C_UTIL_CPP_SRCS := $(srcroot)src/nstime.c $(srcroot)src/malloc_io.c
+CTESTS := $(srcroot)test/aligned_alloc.c $(srcroot)test/allocated.c \
+	$(srcroot)test/ALLOCM_ARENA.c $(srcroot)test/bitmap.c \
+	$(srcroot)test/mremap.c $(srcroot)test/posix_memalign.c \
+	$(srcroot)test/thread_arena.c $(srcroot)test/thread_tcache_enabled.c
+ifeq ($(enable_experimental), 1)
+CTESTS += $(srcroot)test/allocm.c $(srcroot)test/rallocm.c
 endif
-TESTS_UNIT := \
-	$(srcroot)test/unit/a0.c \
-	$(srcroot)test/unit/arena_reset.c \
-	$(srcroot)test/unit/atomic.c \
-	$(srcroot)test/unit/background_thread.c \
-	$(srcroot)test/unit/background_thread_enable.c \
-	$(srcroot)test/unit/base.c \
-	$(srcroot)test/unit/bitmap.c \
-	$(srcroot)test/unit/ckh.c \
-	$(srcroot)test/unit/decay.c \
-	$(srcroot)test/unit/div.c \
-	$(srcroot)test/unit/emitter.c \
-	$(srcroot)test/unit/extent_quantize.c \
-	$(srcroot)test/unit/fork.c \
-	$(srcroot)test/unit/hash.c \
-	$(srcroot)test/unit/hooks.c \
-	$(srcroot)test/unit/junk.c \
-	$(srcroot)test/unit/junk_alloc.c \
-	$(srcroot)test/unit/junk_free.c \
-	$(srcroot)test/unit/log.c \
-	$(srcroot)test/unit/mallctl.c \
-	$(srcroot)test/unit/malloc_io.c \
-	$(srcroot)test/unit/math.c \
-	$(srcroot)test/unit/mq.c \
-	$(srcroot)test/unit/mtx.c \
-	$(srcroot)test/unit/pack.c \
-	$(srcroot)test/unit/pages.c \
-	$(srcroot)test/unit/ph.c \
-	$(srcroot)test/unit/prng.c \
-	$(srcroot)test/unit/prof_accum.c \
-	$(srcroot)test/unit/prof_active.c \
-	$(srcroot)test/unit/prof_gdump.c \
-	$(srcroot)test/unit/prof_idump.c \
-	$(srcroot)test/unit/prof_reset.c \
-	$(srcroot)test/unit/prof_tctx.c \
-	$(srcroot)test/unit/prof_thread_name.c \
-	$(srcroot)test/unit/ql.c \
-	$(srcroot)test/unit/qr.c \
-	$(srcroot)test/unit/rb.c \
-	$(srcroot)test/unit/retained.c \
-	$(srcroot)test/unit/rtree.c \
-	$(srcroot)test/unit/SFMT.c \
-	$(srcroot)test/unit/size_classes.c \
-	$(srcroot)test/unit/slab.c \
-	$(srcroot)test/unit/smoothstep.c \
-	$(srcroot)test/unit/spin.c \
-	$(srcroot)test/unit/stats.c \
-	$(srcroot)test/unit/stats_print.c \
-	$(srcroot)test/unit/ticker.c \
-	$(srcroot)test/unit/nstime.c \
-	$(srcroot)test/unit/tsd.c \
-	$(srcroot)test/unit/witness.c \
-	$(srcroot)test/unit/zero.c
-ifeq (@enable_prof@, 1)
-TESTS_UNIT += \
-	$(srcroot)test/unit/arena_reset_prof.c
-endif
-TESTS_INTEGRATION := $(srcroot)test/integration/aligned_alloc.c \
-	$(srcroot)test/integration/allocated.c \
-	$(srcroot)test/integration/extent.c \
-	$(srcroot)test/integration/mallocx.c \
-	$(srcroot)test/integration/MALLOCX_ARENA.c \
-	$(srcroot)test/integration/overflow.c \
-	$(srcroot)test/integration/posix_memalign.c \
-	$(srcroot)test/integration/rallocx.c \
-	$(srcroot)test/integration/sdallocx.c \
-	$(srcroot)test/integration/thread_arena.c \
-	$(srcroot)test/integration/thread_tcache_enabled.c \
-	$(srcroot)test/integration/xallocx.c
-ifeq (@enable_cxx@, 1)
-CPP_SRCS := $(srcroot)src/jemalloc_cpp.cpp
-TESTS_INTEGRATION_CPP := $(srcroot)test/integration/cpp/basic.cpp
-else
-CPP_SRCS :=
-TESTS_INTEGRATION_CPP :=
-endif
-TESTS_STRESS := $(srcroot)test/stress/microbench.c
 
-TESTS := $(TESTS_UNIT) $(TESTS_INTEGRATION) $(TESTS_INTEGRATION_CPP) $(TESTS_STRESS)
+COBJS := $(CSRCS:$(srcroot)%.c=$(objroot)%.$(O))
+CPICOBJS := $(CSRCS:$(srcroot)%.c=$(objroot)%.pic.$(O))
+CTESTOBJS := $(CTESTS:$(srcroot)%.c=$(objroot)%.$(O))
 
-PRIVATE_NAMESPACE_HDRS := $(objroot)include/jemalloc/internal/private_namespace.h $(objroot)include/jemalloc/internal/private_namespace_jet.h
-PRIVATE_NAMESPACE_GEN_HDRS := $(PRIVATE_NAMESPACE_HDRS:%.h=%.gen.h)
-C_SYM_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.sym.$(O))
-C_SYMS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.sym)
-C_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.$(O))
-CPP_OBJS := $(CPP_SRCS:$(srcroot)%.cpp=$(objroot)%.$(O))
-C_PIC_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.pic.$(O))
-CPP_PIC_OBJS := $(CPP_SRCS:$(srcroot)%.cpp=$(objroot)%.pic.$(O))
-C_JET_SYM_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.jet.sym.$(O))
-C_JET_SYMS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.jet.sym)
-C_JET_OBJS := $(C_SRCS:$(srcroot)%.c=$(objroot)%.jet.$(O))
-C_TESTLIB_UNIT_OBJS := $(C_TESTLIB_SRCS:$(srcroot)%.c=$(objroot)%.unit.$(O))
-C_TESTLIB_INTEGRATION_OBJS := $(C_TESTLIB_SRCS:$(srcroot)%.c=$(objroot)%.integration.$(O))
-C_UTIL_INTEGRATION_OBJS := $(C_UTIL_INTEGRATION_SRCS:$(srcroot)%.c=$(objroot)%.integration.$(O))
-C_TESTLIB_STRESS_OBJS := $(C_TESTLIB_SRCS:$(srcroot)%.c=$(objroot)%.stress.$(O))
-C_TESTLIB_OBJS := $(C_TESTLIB_UNIT_OBJS) $(C_TESTLIB_INTEGRATION_OBJS) $(C_UTIL_INTEGRATION_OBJS) $(C_TESTLIB_STRESS_OBJS)
-
-TESTS_UNIT_OBJS := $(TESTS_UNIT:$(srcroot)%.c=$(objroot)%.$(O))
-TESTS_INTEGRATION_OBJS := $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%.$(O))
-TESTS_INTEGRATION_CPP_OBJS := $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%.$(O))
-TESTS_STRESS_OBJS := $(TESTS_STRESS:$(srcroot)%.c=$(objroot)%.$(O))
-TESTS_OBJS := $(TESTS_UNIT_OBJS) $(TESTS_INTEGRATION_OBJS) $(TESTS_STRESS_OBJS)
-TESTS_CPP_OBJS := $(TESTS_INTEGRATION_CPP_OBJS)
-
-.PHONY: all dist build_doc_html build_doc_man build_doc
+.PHONY: all dist doc_html doc_man doc
 .PHONY: install_bin install_include install_lib
-.PHONY: install_doc_html install_doc_man install_doc install
+.PHONY: install_html install_man install_doc install
 .PHONY: tests check clean distclean relclean
 
-.SECONDARY : $(PRIVATE_NAMESPACE_GEN_HDRS) $(TESTS_OBJS) $(TESTS_CPP_OBJS)
+.SECONDARY : $(CTESTOBJS)
 
 # Default target.
-all: build_lib
+all: build
 
 dist: build_doc
 
-$(objroot)doc/%.html : $(objroot)doc/%.xml $(srcroot)doc/stylesheet.xsl $(objroot)doc/html.xsl
+$(srcroot)doc/%.html : $(objroot)doc/%.xml $(srcroot)doc/stylesheet.xsl $(objroot)doc/html.xsl
 	$(XSLTPROC) -o $@ $(objroot)doc/html.xsl $<
 
-$(objroot)doc/%.3 : $(objroot)doc/%.xml $(srcroot)doc/stylesheet.xsl $(objroot)doc/manpages.xsl
+$(srcroot)doc/%.3 : $(objroot)doc/%.xml $(srcroot)doc/stylesheet.xsl $(objroot)doc/manpages.xsl
 	$(XSLTPROC) -o $@ $(objroot)doc/manpages.xsl $<
 
 build_doc_html: $(DOCS_HTML)
@@ -287,252 +138,155 @@ build_doc: $(DOCS)
 # Include generated dependency files.
 #
 ifdef CC_MM
--include $(C_SYM_OBJS:%.$(O)=%.d)
--include $(C_OBJS:%.$(O)=%.d)
--include $(CPP_OBJS:%.$(O)=%.d)
--include $(C_PIC_OBJS:%.$(O)=%.d)
--include $(CPP_PIC_OBJS:%.$(O)=%.d)
--include $(C_JET_SYM_OBJS:%.$(O)=%.d)
--include $(C_JET_OBJS:%.$(O)=%.d)
--include $(C_TESTLIB_OBJS:%.$(O)=%.d)
--include $(TESTS_OBJS:%.$(O)=%.d)
--include $(TESTS_CPP_OBJS:%.$(O)=%.d)
+-include $(COBJS:%.$(O)=%.d)
+-include $(CPICOBJS:%.$(O)=%.d)
+-include $(CTESTOBJS:%.$(O)=%.d)
 endif
 
-$(C_SYM_OBJS): $(objroot)src/%.sym.$(O): $(srcroot)src/%.c
-$(C_SYM_OBJS): CPPFLAGS += -DJEMALLOC_NO_PRIVATE_NAMESPACE
-$(C_SYMS): $(objroot)src/%.sym: $(objroot)src/%.sym.$(O)
-$(C_OBJS): $(objroot)src/%.$(O): $(srcroot)src/%.c
-$(CPP_OBJS): $(objroot)src/%.$(O): $(srcroot)src/%.cpp
-$(C_PIC_OBJS): $(objroot)src/%.pic.$(O): $(srcroot)src/%.c
-$(C_PIC_OBJS): CFLAGS += $(PIC_CFLAGS)
-$(CPP_PIC_OBJS): $(objroot)src/%.pic.$(O): $(srcroot)src/%.cpp
-$(CPP_PIC_OBJS): CXXFLAGS += $(PIC_CFLAGS)
-$(C_JET_SYM_OBJS): $(objroot)src/%.jet.sym.$(O): $(srcroot)src/%.c
-$(C_JET_SYM_OBJS): CPPFLAGS += -DJEMALLOC_JET -DJEMALLOC_NO_PRIVATE_NAMESPACE
-$(C_JET_SYMS): $(objroot)src/%.jet.sym: $(objroot)src/%.jet.sym.$(O)
-$(C_JET_OBJS): $(objroot)src/%.jet.$(O): $(srcroot)src/%.c
-$(C_JET_OBJS): CPPFLAGS += -DJEMALLOC_JET
-$(C_TESTLIB_UNIT_OBJS): $(objroot)test/src/%.unit.$(O): $(srcroot)test/src/%.c
-$(C_TESTLIB_UNIT_OBJS): CPPFLAGS += -DJEMALLOC_UNIT_TEST
-$(C_TESTLIB_INTEGRATION_OBJS): $(objroot)test/src/%.integration.$(O): $(srcroot)test/src/%.c
-$(C_TESTLIB_INTEGRATION_OBJS): CPPFLAGS += -DJEMALLOC_INTEGRATION_TEST
-$(C_UTIL_INTEGRATION_OBJS): $(objroot)src/%.integration.$(O): $(srcroot)src/%.c
-$(C_TESTLIB_STRESS_OBJS): $(objroot)test/src/%.stress.$(O): $(srcroot)test/src/%.c
-$(C_TESTLIB_STRESS_OBJS): CPPFLAGS += -DJEMALLOC_STRESS_TEST -DJEMALLOC_STRESS_TESTLIB
-$(C_TESTLIB_OBJS): CPPFLAGS += -I$(srcroot)test/include -I$(objroot)test/include
-$(TESTS_UNIT_OBJS): CPPFLAGS += -DJEMALLOC_UNIT_TEST
-$(TESTS_INTEGRATION_OBJS): CPPFLAGS += -DJEMALLOC_INTEGRATION_TEST
-$(TESTS_INTEGRATION_CPP_OBJS): CPPFLAGS += -DJEMALLOC_INTEGRATION_CPP_TEST
-$(TESTS_STRESS_OBJS): CPPFLAGS += -DJEMALLOC_STRESS_TEST
-$(TESTS_OBJS): $(objroot)test/%.$(O): $(srcroot)test/%.c
-$(TESTS_CPP_OBJS): $(objroot)test/%.$(O): $(srcroot)test/%.cpp
-$(TESTS_OBJS): CPPFLAGS += -I$(srcroot)test/include -I$(objroot)test/include
-$(TESTS_CPP_OBJS): CPPFLAGS += -I$(srcroot)test/include -I$(objroot)test/include
+$(COBJS): $(objroot)src/%.$(O): $(srcroot)src/%.c
+$(CPICOBJS): $(objroot)src/%.pic.$(O): $(srcroot)src/%.c
+$(CPICOBJS): CFLAGS += $(PIC_CFLAGS)
+$(CTESTOBJS): $(objroot)test/%.$(O): $(srcroot)test/%.c
+$(CTESTOBJS): CPPFLAGS += -I$(objroot)test
 ifneq ($(IMPORTLIB),$(SO))
-$(CPP_OBJS) $(C_SYM_OBJS) $(C_OBJS) $(C_JET_SYM_OBJS) $(C_JET_OBJS): CPPFLAGS += -DDLLEXPORT
+$(COBJS): CPPFLAGS += -DDLLEXPORT
 endif
 
-# Dependencies.
 ifndef CC_MM
+# Dependencies
 HEADER_DIRS = $(srcroot)include/jemalloc/internal \
 	$(objroot)include/jemalloc $(objroot)include/jemalloc/internal
-HEADERS = $(filter-out $(PRIVATE_NAMESPACE_HDRS),$(wildcard $(foreach dir,$(HEADER_DIRS),$(dir)/*.h)))
-$(C_SYM_OBJS) $(C_OBJS) $(CPP_OBJS) $(C_PIC_OBJS) $(CPP_PIC_OBJS) $(C_JET_SYM_OBJS) $(C_JET_OBJS) $(C_TESTLIB_OBJS) $(TESTS_OBJS) $(TESTS_CPP_OBJS): $(HEADERS)
-$(TESTS_OBJS) $(TESTS_CPP_OBJS): $(objroot)test/include/test/jemalloc_test.h
+HEADERS = $(wildcard $(foreach dir,$(HEADER_DIRS),$(dir)/*.h))
+$(COBJS) $(CPICOBJS) $(CTESTOBJS): $(HEADERS)
+$(CTESTOBJS): $(objroot)test/jemalloc_test.h
 endif
 
-$(C_OBJS) $(CPP_OBJS) $(C_PIC_OBJS) $(CPP_PIC_OBJS) $(C_TESTLIB_INTEGRATION_OBJS) $(C_UTIL_INTEGRATION_OBJS) $(TESTS_INTEGRATION_OBJS) $(TESTS_INTEGRATION_CPP_OBJS): $(objroot)include/jemalloc/internal/private_namespace.h
-$(C_JET_OBJS) $(C_TESTLIB_UNIT_OBJS) $(C_TESTLIB_STRESS_OBJS) $(TESTS_UNIT_OBJS) $(TESTS_STRESS_OBJS): $(objroot)include/jemalloc/internal/private_namespace_jet.h
-
-$(C_SYM_OBJS) $(C_OBJS) $(C_PIC_OBJS) $(C_JET_SYM_OBJS) $(C_JET_OBJS) $(C_TESTLIB_OBJS) $(TESTS_OBJS): %.$(O):
+$(COBJS) $(CPICOBJS) $(CTESTOBJS): %.$(O):
 	@mkdir -p $(@D)
 	$(CC) $(CFLAGS) -c $(CPPFLAGS) $(CTARGET) $<
 ifdef CC_MM
 	@$(CC) -MM $(CPPFLAGS) -MT $@ -o $(@:%.$(O)=%.d) $<
 endif
 
-$(C_SYMS): %.sym:
-	@mkdir -p $(@D)
-	$(DUMP_SYMS) $< | $(AWK) -f $(objroot)include/jemalloc/internal/private_symbols.awk > $@
-
-$(C_JET_SYMS): %.sym:
-	@mkdir -p $(@D)
-	$(DUMP_SYMS) $< | $(AWK) -f $(objroot)include/jemalloc/internal/private_symbols_jet.awk > $@
-
-$(objroot)include/jemalloc/internal/private_namespace.gen.h: $(C_SYMS)
-	$(SHELL) $(srcroot)include/jemalloc/internal/private_namespace.sh $^ > $@
-
-$(objroot)include/jemalloc/internal/private_namespace_jet.gen.h: $(C_JET_SYMS)
-	$(SHELL) $(srcroot)include/jemalloc/internal/private_namespace.sh $^ > $@
-
-%.h: %.gen.h
-	@if ! `cmp -s $< $@` ; then echo "cp $< $<"; cp $< $@ ; fi
-
-$(CPP_OBJS) $(CPP_PIC_OBJS) $(TESTS_CPP_OBJS): %.$(O):
-	@mkdir -p $(@D)
-	$(CXX) $(CXXFLAGS) -c $(CPPFLAGS) $(CTARGET) $<
-ifdef CC_MM
-	@$(CXX) -MM $(CPPFLAGS) -MT $@ -o $(@:%.$(O)=%.d) $<
-endif
-
 ifneq ($(SOREV),$(SO))
 %.$(SO) : %.$(SOREV)
 	@mkdir -p $(@D)
 	ln -sf $(<F) $@
 endif
 
-$(objroot)lib/$(LIBJEMALLOC).$(SOREV) : $(if $(PIC_CFLAGS),$(C_PIC_OBJS),$(C_OBJS)) $(if $(PIC_CFLAGS),$(CPP_PIC_OBJS),$(CPP_OBJS))
+$(objroot)lib/$(LIBJEMALLOC).$(SOREV) : $(if $(PIC_CFLAGS),$(CPICOBJS),$(COBJS))
 	@mkdir -p $(@D)
 	$(CC) $(DSO_LDFLAGS) $(call RPATH,$(RPATH_EXTRA)) $(LDTARGET) $+ $(LDFLAGS) $(LIBS) $(EXTRA_LDFLAGS)
 
-$(objroot)lib/$(LIBJEMALLOC)_pic.$(A) : $(C_PIC_OBJS) $(CPP_PIC_OBJS)
-$(objroot)lib/$(LIBJEMALLOC).$(A) : $(C_OBJS) $(CPP_OBJS)
-$(objroot)lib/$(LIBJEMALLOC)_s.$(A) : $(C_OBJS) $(CPP_OBJS)
+$(objroot)lib/$(LIBJEMALLOC)_pic.$(A) : $(CPICOBJS)
+$(objroot)lib/$(LIBJEMALLOC).$(A) : $(COBJS)
+$(objroot)lib/$(LIBJEMALLOC)_s.$(A) : $(COBJS)
 
 $(STATIC_LIBS):
 	@mkdir -p $(@D)
-	$(AR) $(ARFLAGS)@AROUT@ $+
+	$(MKLIB) $+
 
-$(objroot)test/unit/%$(EXE): $(objroot)test/unit/%.$(O) $(C_JET_OBJS) $(C_TESTLIB_UNIT_OBJS)
-	@mkdir -p $(@D)
-	$(CC) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(LDFLAGS) $(filter-out -lm,$(LIBS)) $(LM) $(EXTRA_LDFLAGS)
+$(objroot)test/bitmap$(EXE): $(objroot)src/bitmap.$(O)
 
-$(objroot)test/integration/%$(EXE): $(objroot)test/integration/%.$(O) $(C_TESTLIB_INTEGRATION_OBJS) $(C_UTIL_INTEGRATION_OBJS) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
+$(objroot)test/%$(EXE): $(objroot)test/%.$(O) $(objroot)src/util.$(O) $(DSOS)
 	@mkdir -p $(@D)
-	$(CC) $(TEST_LD_MODE) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(LJEMALLOC) $(LDFLAGS) $(filter-out -lm,$(filter -lrt -lpthread -lstdc++,$(LIBS))) $(LM) $(EXTRA_LDFLAGS)
-
-$(objroot)test/integration/cpp/%$(EXE): $(objroot)test/integration/cpp/%.$(O) $(C_TESTLIB_INTEGRATION_OBJS) $(C_UTIL_INTEGRATION_OBJS) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
-	@mkdir -p $(@D)
-	$(CXX) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB) $(LDFLAGS) $(filter-out -lm,$(LIBS)) -lm $(EXTRA_LDFLAGS)
-
-$(objroot)test/stress/%$(EXE): $(objroot)test/stress/%.$(O) $(C_JET_OBJS) $(C_TESTLIB_STRESS_OBJS) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB)
-	@mkdir -p $(@D)
-	$(CC) $(TEST_LD_MODE) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB) $(LDFLAGS) $(filter-out -lm,$(LIBS)) $(LM) $(EXTRA_LDFLAGS)
+	$(CC) $(LDTARGET) $(filter %.$(O),$^) $(call RPATH,$(objroot)lib) $(objroot)lib/$(LIBJEMALLOC).$(IMPORTLIB) $(filter -lpthread,$(LIBS)) $(EXTRA_LDFLAGS)
 
 build_lib_shared: $(DSOS)
 build_lib_static: $(STATIC_LIBS)
-build_lib: build_lib_shared build_lib_static
+build: build_lib_shared build_lib_static
 
 install_bin:
-	$(INSTALL) -d $(BINDIR)
+	install -d $(BINDIR)
 	@for b in $(BINS); do \
-	echo "$(INSTALL) -m 755 $$b $(BINDIR)"; \
-	$(INSTALL) -m 755 $$b $(BINDIR); \
+	echo "install -m 755 $$b $(BINDIR)"; \
+	install -m 755 $$b $(BINDIR); \
 done
 
 install_include:
-	$(INSTALL) -d $(INCLUDEDIR)/jemalloc
-	@for h in $(C_HDRS); do \
-	echo "$(INSTALL) -m 644 $$h $(INCLUDEDIR)/jemalloc"; \
-	$(INSTALL) -m 644 $$h $(INCLUDEDIR)/jemalloc; \
+	install -d $(INCLUDEDIR)/jemalloc
+	@for h in $(CHDRS); do \
+	echo "install -m 644 $$h $(INCLUDEDIR)/jemalloc"; \
+	install -m 644 $$h $(INCLUDEDIR)/jemalloc; \
 done
 
 install_lib_shared: $(DSOS)
-	$(INSTALL) -d $(LIBDIR)
-	$(INSTALL) -m 755 $(objroot)lib/$(LIBJEMALLOC).$(SOREV) $(LIBDIR)
+	install -d $(LIBDIR)
+	install -m 755 $(objroot)lib/$(LIBJEMALLOC).$(SOREV) $(LIBDIR)
 ifneq ($(SOREV),$(SO))
 	ln -sf $(LIBJEMALLOC).$(SOREV) $(LIBDIR)/$(LIBJEMALLOC).$(SO)
 endif
 
 install_lib_static: $(STATIC_LIBS)
-	$(INSTALL) -d $(LIBDIR)
+	install -d $(LIBDIR)
 	@for l in $(STATIC_LIBS); do \
-	echo "$(INSTALL) -m 755 $$l $(LIBDIR)"; \
-	$(INSTALL) -m 755 $$l $(LIBDIR); \
+	echo "install -m 755 $$l $(LIBDIR)"; \
+	install -m 755 $$l $(LIBDIR); \
 done
 
-install_lib_pc: $(PC)
-	$(INSTALL) -d $(LIBDIR)/pkgconfig
-	@for l in $(PC); do \
-	echo "$(INSTALL) -m 644 $$l $(LIBDIR)/pkgconfig"; \
-	$(INSTALL) -m 644 $$l $(LIBDIR)/pkgconfig; \
-done
-
-install_lib: install_lib_shared install_lib_static install_lib_pc
+install_lib: install_lib_shared install_lib_static
 
 install_doc_html:
-	$(INSTALL) -d $(DATADIR)/doc/jemalloc$(install_suffix)
+	install -d $(DATADIR)/doc/jemalloc$(install_suffix)
 	@for d in $(DOCS_HTML); do \
-	echo "$(INSTALL) -m 644 $$d $(DATADIR)/doc/jemalloc$(install_suffix)"; \
-	$(INSTALL) -m 644 $$d $(DATADIR)/doc/jemalloc$(install_suffix); \
+	echo "install -m 644 $$d $(DATADIR)/doc/jemalloc$(install_suffix)"; \
+	install -m 644 $$d $(DATADIR)/doc/jemalloc$(install_suffix); \
 done
 
 install_doc_man:
-	$(INSTALL) -d $(MANDIR)/man3
+	install -d $(MANDIR)/man3
 	@for d in $(DOCS_MAN3); do \
-	echo "$(INSTALL) -m 644 $$d $(MANDIR)/man3"; \
-	$(INSTALL) -m 644 $$d $(MANDIR)/man3; \
+	echo "install -m 644 $$d $(MANDIR)/man3"; \
+	install -m 644 $$d $(MANDIR)/man3; \
 done
 
 install_doc: install_doc_html install_doc_man
 
 install: install_bin install_include install_lib install_doc
 
-tests_unit: $(TESTS_UNIT:$(srcroot)%.c=$(objroot)%$(EXE))
-tests_integration: $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%$(EXE)) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%$(EXE))
-tests_stress: $(TESTS_STRESS:$(srcroot)%.c=$(objroot)%$(EXE))
-tests: tests_unit tests_integration tests_stress
+tests: $(CTESTS:$(srcroot)%.c=$(objroot)%$(EXE))
 
-check_unit_dir:
-	@mkdir -p $(objroot)test/unit
-check_integration_dir:
-	@mkdir -p $(objroot)test/integration
-stress_dir:
-	@mkdir -p $(objroot)test/stress
-check_dir: check_unit_dir check_integration_dir
-
-check_unit: tests_unit check_unit_dir
-	$(SHELL) $(objroot)test/test.sh $(TESTS_UNIT:$(srcroot)%.c=$(objroot)%)
-check_integration_prof: tests_integration check_integration_dir
-ifeq ($(enable_prof), 1)
-	$(MALLOC_CONF)="prof:true" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
-	$(MALLOC_CONF)="prof:true,prof_active:false" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
-endif
-check_integration_decay: tests_integration check_integration_dir
-	$(MALLOC_CONF)="dirty_decay_ms:-1,muzzy_decay_ms:-1" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
-	$(MALLOC_CONF)="dirty_decay_ms:0,muzzy_decay_ms:0" $(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
-check_integration: tests_integration check_integration_dir
-	$(SHELL) $(objroot)test/test.sh $(TESTS_INTEGRATION:$(srcroot)%.c=$(objroot)%) $(TESTS_INTEGRATION_CPP:$(srcroot)%.cpp=$(objroot)%)
-stress: tests_stress stress_dir
-	$(SHELL) $(objroot)test/test.sh $(TESTS_STRESS:$(srcroot)%.c=$(objroot)%)
-check: check_unit check_integration check_integration_decay check_integration_prof
+check: tests
+	@mkdir -p $(objroot)test
+	@$(SHELL) -c 'total=0; \
+		failures=0; \
+		echo "========================================="; \
+		for t in $(CTESTS:$(srcroot)%.c=$(objroot)%); do \
+			total=`expr $$total + 1`; \
+			/bin/echo -n "$${t} ... "; \
+			$(TEST_LIBRARY_PATH) $${t}$(EXE) $(abs_srcroot) \
+			  $(abs_objroot) > $(objroot)$${t}.out 2>&1; \
+			if test -e "$(srcroot)$${t}.exp"; then \
+				diff -w -u $(srcroot)$${t}.exp \
+				  $(objroot)$${t}.out >/dev/null 2>&1; \
+				fail=$$?; \
+				if test "$${fail}" -eq "1" ; then \
+					failures=`expr $${failures} + 1`; \
+					echo "*** FAIL ***"; \
+				else \
+					echo "pass"; \
+				fi; \
+			else \
+				echo "*** FAIL *** (.exp file is missing)"; \
+				failures=`expr $${failures} + 1`; \
+			fi; \
+		done; \
+		echo "========================================="; \
+		echo "Failures: $${failures}/$${total}"'
 
 clean:
-	rm -f $(PRIVATE_NAMESPACE_HDRS)
-	rm -f $(PRIVATE_NAMESPACE_GEN_HDRS)
-	rm -f $(C_SYM_OBJS)
-	rm -f $(C_SYMS)
-	rm -f $(C_OBJS)
-	rm -f $(CPP_OBJS)
-	rm -f $(C_PIC_OBJS)
-	rm -f $(CPP_PIC_OBJS)
-	rm -f $(C_JET_SYM_OBJS)
-	rm -f $(C_JET_SYMS)
-	rm -f $(C_JET_OBJS)
-	rm -f $(C_TESTLIB_OBJS)
-	rm -f $(C_SYM_OBJS:%.$(O)=%.d)
-	rm -f $(C_OBJS:%.$(O)=%.d)
-	rm -f $(CPP_OBJS:%.$(O)=%.d)
-	rm -f $(C_PIC_OBJS:%.$(O)=%.d)
-	rm -f $(CPP_PIC_OBJS:%.$(O)=%.d)
-	rm -f $(C_JET_SYM_OBJS:%.$(O)=%.d)
-	rm -f $(C_JET_OBJS:%.$(O)=%.d)
-	rm -f $(C_TESTLIB_OBJS:%.$(O)=%.d)
-	rm -f $(TESTS_OBJS:%.$(O)=%$(EXE))
-	rm -f $(TESTS_OBJS)
-	rm -f $(TESTS_OBJS:%.$(O)=%.d)
-	rm -f $(TESTS_OBJS:%.$(O)=%.out)
-	rm -f $(TESTS_CPP_OBJS:%.$(O)=%$(EXE))
-	rm -f $(TESTS_CPP_OBJS)
-	rm -f $(TESTS_CPP_OBJS:%.$(O)=%.d)
-	rm -f $(TESTS_CPP_OBJS:%.$(O)=%.out)
+	rm -f $(COBJS)
+	rm -f $(CPICOBJS)
+	rm -f $(COBJS:%.$(O)=%.d)
+	rm -f $(CPICOBJS:%.$(O)=%.d)
+	rm -f $(CTESTOBJS:%.$(O)=%$(EXE))
+	rm -f $(CTESTOBJS)
+	rm -f $(CTESTOBJS:%.$(O)=%.d)
+	rm -f $(CTESTOBJS:%.$(O)=%.out)
 	rm -f $(DSOS) $(STATIC_LIBS)
 
 distclean: clean
-	rm -f $(objroot)bin/jemalloc-config
-	rm -f $(objroot)bin/jemalloc.sh
-	rm -f $(objroot)bin/jeprof
+	rm -rf $(objroot)autom4te.cache
 	rm -f $(objroot)config.log
 	rm -f $(objroot)config.status
 	rm -f $(objroot)config.stamp
@@ -541,7 +295,7 @@ distclean: clean
 
 relclean: distclean
 	rm -f $(objroot)configure
-	rm -f $(objroot)VERSION
+	rm -f $(srcroot)VERSION
 	rm -f $(DOCS_HTML)
 	rm -f $(DOCS_MAN3)
 

deps/jemalloc/README

@@ -1,14 +1,10 @@
-jemalloc is a general purpose malloc(3) implementation that emphasizes
-fragmentation avoidance and scalable concurrency support.  jemalloc first came
-into use as the FreeBSD libc allocator in 2005, and since then it has found its
-way into numerous applications that rely on its predictable behavior.  In 2010
-jemalloc development efforts broadened to include developer support features
-such as heap profiling and extensive monitoring/tuning hooks.  Modern jemalloc
-releases continue to be integrated back into FreeBSD, and therefore versatility
-remains critical.  Ongoing development efforts trend toward making jemalloc
-among the best allocators for a broad range of demanding applications, and
-eliminating/mitigating weaknesses that have practical repercussions for real
-world applications.
+jemalloc is a general-purpose scalable concurrent malloc(3) implementation.
+This distribution is a "portable" implementation that currently targets
+FreeBSD, Linux, Apple OS X, and MinGW.  jemalloc is included as the default
+allocator in the FreeBSD and NetBSD operating systems, and it is used by the
+Mozilla Firefox web browser on Microsoft Windows-related platforms.  Depending
+on your needs, one of the other divergent versions may suit your needs better
+than this distribution.
 
 The COPYING file contains copyright and licensing information.
 
@@ -17,4 +13,4 @@ jemalloc.
 
 The ChangeLog file contains a brief summary of changes for each release.
 
-URL: http://jemalloc.net/
+URL: http://www.canonware.com/jemalloc/

deps/jemalloc/TUNING.md

@@ -1,129 +0,0 @@
-This document summarizes the common approaches for performance fine tuning with
-jemalloc (as of 5.1.0).  The default configuration of jemalloc tends to work
-reasonably well in practice, and most applications should not have to tune any
-options. However, in order to cover a wide range of applications and avoid
-pathological cases, the default setting is sometimes kept conservative and
-suboptimal, even for many common workloads.  When jemalloc is properly tuned for
-a specific application / workload, it is common to improve system level metrics
-by a few percent, or make favorable trade-offs.
-
-
-## Notable runtime options for performance tuning
-
-Runtime options can be set via
-[malloc_conf](http://jemalloc.net/jemalloc.3.html#tuning).
-
-* [background_thread](http://jemalloc.net/jemalloc.3.html#background_thread)
-
-    Enabling jemalloc background threads generally improves the tail latency for
-    application threads, since unused memory purging is shifted to the dedicated
-    background threads.  In addition, unintended purging delay caused by
-    application inactivity is avoided with background threads.
-
-    Suggested: `background_thread:true` when jemalloc managed threads can be
-    allowed.
-
-* [metadata_thp](http://jemalloc.net/jemalloc.3.html#opt.metadata_thp)
-
-    Allowing jemalloc to utilize transparent huge pages for its internal
-    metadata usually reduces TLB misses significantly, especially for programs
-    with large memory footprint and frequent allocation / deallocation
-    activities.  Metadata memory usage may increase due to the use of huge
-    pages.
-
-    Suggested for allocation intensive programs: `metadata_thp:auto` or
-    `metadata_thp:always`, which is expected to improve CPU utilization at a
-    small memory cost.
-
-* [dirty_decay_ms](http://jemalloc.net/jemalloc.3.html#opt.dirty_decay_ms) and
-  [muzzy_decay_ms](http://jemalloc.net/jemalloc.3.html#opt.muzzy_decay_ms)
-
-    Decay time determines how fast jemalloc returns unused pages back to the
-    operating system, and therefore provides a fairly straightforward trade-off
-    between CPU and memory usage.  Shorter decay time purges unused pages faster
-    to reduces memory usage (usually at the cost of more CPU cycles spent on
-    purging), and vice versa.
-
-    Suggested: tune the values based on the desired trade-offs.
-
-* [narenas](http://jemalloc.net/jemalloc.3.html#opt.narenas)
-
-    By default jemalloc uses multiple arenas to reduce internal lock contention.
-    However high arena count may also increase overall memory fragmentation,
-    since arenas manage memory independently.  When high degree of parallelism
-    is not expected at the allocator level, lower number of arenas often
-    improves memory usage.
-
-    Suggested: if low parallelism is expected, try lower arena count while
-    monitoring CPU and memory usage.
-
-* [percpu_arena](http://jemalloc.net/jemalloc.3.html#opt.percpu_arena)
-
-    Enable dynamic thread to arena association based on running CPU.  This has
-    the potential to improve locality, e.g. when thread to CPU affinity is
-    present.
-    
-    Suggested: try `percpu_arena:percpu` or `percpu_arena:phycpu` if
-    thread migration between processors is expected to be infrequent.
-
-Examples:
-
-* High resource consumption application, prioritizing CPU utilization:
-
-    `background_thread:true,metadata_thp:auto` combined with relaxed decay time
-    (increased `dirty_decay_ms` and / or `muzzy_decay_ms`,
-    e.g. `dirty_decay_ms:30000,muzzy_decay_ms:30000`).
-
-* High resource consumption application, prioritizing memory usage:
-
-    `background_thread:true` combined with shorter decay time (decreased
-    `dirty_decay_ms` and / or `muzzy_decay_ms`,
-    e.g. `dirty_decay_ms:5000,muzzy_decay_ms:5000`), and lower arena count
-    (e.g. number of CPUs).
-
-* Low resource consumption application:
-
-    `narenas:1,lg_tcache_max:13` combined with shorter decay time (decreased
-    `dirty_decay_ms` and / or `muzzy_decay_ms`,e.g.
-    `dirty_decay_ms:1000,muzzy_decay_ms:0`).
-
-* Extremely conservative -- minimize memory usage at all costs, only suitable when
-allocation activity is very rare:
-
-    `narenas:1,tcache:false,dirty_decay_ms:0,muzzy_decay_ms:0`
-
-Note that it is recommended to combine the options with `abort_conf:true` which
-aborts immediately on illegal options.
-
-## Beyond runtime options
-
-In addition to the runtime options, there are a number of programmatic ways to
-improve application performance with jemalloc.
-
-* [Explicit arenas](http://jemalloc.net/jemalloc.3.html#arenas.create)
-
-    Manually created arenas can help performance in various ways, e.g. by
-    managing locality and contention for specific usages.  For example,
-    applications can explicitly allocate frequently accessed objects from a
-    dedicated arena with
-    [mallocx()](http://jemalloc.net/jemalloc.3.html#MALLOCX_ARENA) to improve
-    locality.  In addition, explicit arenas often benefit from individually
-    tuned options, e.g. relaxed [decay
-    time](http://jemalloc.net/jemalloc.3.html#arena.i.dirty_decay_ms) if
-    frequent reuse is expected.
-
-* [Extent hooks](http://jemalloc.net/jemalloc.3.html#arena.i.extent_hooks)
-
-    Extent hooks allow customization for managing underlying memory.  One use
-    case for performance purpose is to utilize huge pages -- for example,
-    [HHVM](https://github.com/facebook/hhvm/blob/master/hphp/util/alloc.cpp)
-    uses explicit arenas with customized extent hooks to manage 1GB huge pages
-    for frequently accessed data, which reduces TLB misses significantly.
-
-* [Explicit thread-to-arena
-  binding](http://jemalloc.net/jemalloc.3.html#thread.arena)
-
-    It is common for some threads in an application to have different memory
-    access / allocation patterns.  Threads with heavy workloads often benefit
-    from explicit binding, e.g. binding very active threads to dedicated arenas
-    may reduce contention at the allocator level.

deps/jemalloc/VERSION

@@ -1 +1 @@
-5.1.0-0-g0
+3.2.0-0-g87499f6748ebe4817571e817e9f680ccb5bf54a9

deps/jemalloc/bin/jemalloc-config.in

@@ -1,83 +0,0 @@
-#!/bin/sh
-
-usage() {
-	cat <<EOF
-Usage:
-  @BINDIR@/jemalloc-config <option>
-Options:
-  --help | -h  : Print usage.
-  --version    : Print jemalloc version.
-  --revision   : Print shared library revision number.
-  --config     : Print configure options used to build jemalloc.
-  --prefix     : Print installation directory prefix.
-  --bindir     : Print binary installation directory.
-  --datadir    : Print data installation directory.
-  --includedir : Print include installation directory.
-  --libdir     : Print library installation directory.
-  --mandir     : Print manual page installation directory.
-  --cc         : Print compiler used to build jemalloc.
-  --cflags     : Print compiler flags used to build jemalloc.
-  --cppflags   : Print preprocessor flags used to build jemalloc.
-  --cxxflags   : Print C++ compiler flags used to build jemalloc.
-  --ldflags    : Print library flags used to build jemalloc.
-  --libs       : Print libraries jemalloc was linked against.
-EOF
-}
-
-prefix="@prefix@"
-exec_prefix="@exec_prefix@"
-
-case "$1" in
---help | -h)
-	usage
-	exit 0
-	;;
---version)
-	echo "@jemalloc_version@"
-	;;
---revision)
-	echo "@rev@"
-	;;
---config)
-	echo "@CONFIG@"
-	;;
---prefix)
-	echo "@PREFIX@"
-	;;
---bindir)
-	echo "@BINDIR@"
-	;;
---datadir)
-	echo "@DATADIR@"
-	;;
---includedir)
-	echo "@INCLUDEDIR@"
-	;;
---libdir)
-	echo "@LIBDIR@"
-	;;
---mandir)
-	echo "@MANDIR@"
-	;;
---cc)
-	echo "@CC@"
-	;;
---cflags)
-	echo "@CFLAGS@"
-	;;
---cppflags)
-	echo "@CPPFLAGS@"
-	;;
---cxxflags)
-	echo "@CXXFLAGS@"
-	;;
---ldflags)
-	echo "@LDFLAGS@ @EXTRA_LDFLAGS@"
-	;;
---libs)
-	echo "@LIBS@"
-	;;
-*)
-	usage
-	exit 1
-esac

deps/jemalloc/config.guess

@@ -1,12 +1,14 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright 1992-2016 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2016-10-02'
+timestamp='2012-02-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
+# the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -20,17 +22,19 @@ timestamp='2016-10-02'
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
 #
-# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
 #
 # You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
-#
-# Please send patches to <config-patches@gnu.org>.
-
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -50,7 +54,9 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright 1992-2016 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -132,27 +138,6 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
-case "${UNAME_SYSTEM}" in
-Linux|GNU|GNU/*)
-	# If the system lacks a compiler, then just pick glibc.
-	# We could probably try harder.
-	LIBC=gnu
-
-	eval $set_cc_for_build
-	cat <<-EOF > $dummy.c
-	#include <features.h>
-	#if defined(__UCLIBC__)
-	LIBC=uclibc
-	#elif defined(__dietlibc__)
-	LIBC=dietlibc
-	#else
-	LIBC=gnu
-	#endif
-	EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
-	;;
-esac
-
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -168,29 +153,19 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# Note: NetBSD doesn't particularly care about the vendor
 	# portion of the name.  We always set it to "unknown".
 	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
-	    /sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || \
-	    echo unknown)`
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
 	case "${UNAME_MACHINE_ARCH}" in
 	    armeb) machine=armeb-unknown ;;
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
 	    sh5el) machine=sh5le-unknown ;;
-	    earmv*)
-		arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
-		endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
-		machine=${arch}${endian}-unknown
-		;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
-	# to ELF recently (or will in the future) and ABI.
+	# to ELF recently, or will in the future.
 	case "${UNAME_MACHINE_ARCH}" in
-	    earm*)
-		os=netbsdelf
-		;;
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -207,13 +182,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		os=netbsd
 		;;
 	esac
-	# Determine ABI tags.
-	case "${UNAME_MACHINE_ARCH}" in
-	    earm*)
-		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
-		abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
-		;;
-	esac
 	# The OS release
 	# Debian GNU/NetBSD machines have a different userland, and
 	# thus, need a distinct triplet. However, they do not need
@@ -224,26 +192,18 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		release='-gnu'
 		;;
 	    *)
-		release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2`
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
 		;;
 	esac
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}${abi}"
-	exit ;;
-    *:Bitrig:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	echo "${machine}-${os}${release}"
 	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
 	exit ;;
-    *:LibertyBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE}
-	exit ;;
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
@@ -256,9 +216,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
-    *:Sortix:*:*)
-	echo ${UNAME_MACHINE}-unknown-sortix
-	exit ;;
     alpha:OSF1:*:*)
 	case $UNAME_RELEASE in
 	*4.0)
@@ -275,42 +232,42 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
 	case "$ALPHA_CPU_TYPE" in
 	    "EV4 (21064)")
-		UNAME_MACHINE=alpha ;;
+		UNAME_MACHINE="alpha" ;;
 	    "EV4.5 (21064)")
-		UNAME_MACHINE=alpha ;;
+		UNAME_MACHINE="alpha" ;;
 	    "LCA4 (21066/21068)")
-		UNAME_MACHINE=alpha ;;
+		UNAME_MACHINE="alpha" ;;
 	    "EV5 (21164)")
-		UNAME_MACHINE=alphaev5 ;;
+		UNAME_MACHINE="alphaev5" ;;
 	    "EV5.6 (21164A)")
-		UNAME_MACHINE=alphaev56 ;;
+		UNAME_MACHINE="alphaev56" ;;
 	    "EV5.6 (21164PC)")
-		UNAME_MACHINE=alphapca56 ;;
+		UNAME_MACHINE="alphapca56" ;;
 	    "EV5.7 (21164PC)")
-		UNAME_MACHINE=alphapca57 ;;
+		UNAME_MACHINE="alphapca57" ;;
 	    "EV6 (21264)")
-		UNAME_MACHINE=alphaev6 ;;
+		UNAME_MACHINE="alphaev6" ;;
 	    "EV6.7 (21264A)")
-		UNAME_MACHINE=alphaev67 ;;
+		UNAME_MACHINE="alphaev67" ;;
 	    "EV6.8CB (21264C)")
-		UNAME_MACHINE=alphaev68 ;;
+		UNAME_MACHINE="alphaev68" ;;
 	    "EV6.8AL (21264B)")
-		UNAME_MACHINE=alphaev68 ;;
+		UNAME_MACHINE="alphaev68" ;;
 	    "EV6.8CX (21264D)")
-		UNAME_MACHINE=alphaev68 ;;
+		UNAME_MACHINE="alphaev68" ;;
 	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE=alphaev69 ;;
+		UNAME_MACHINE="alphaev69" ;;
 	    "EV7 (21364)")
-		UNAME_MACHINE=alphaev7 ;;
+		UNAME_MACHINE="alphaev7" ;;
 	    "EV7.9 (21364A)")
-		UNAME_MACHINE=alphaev79 ;;
+		UNAME_MACHINE="alphaev79" ;;
 	esac
 	# A Pn.n version is a patched version.
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
 	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
 	exitcode=$?
 	trap '' 0
@@ -345,7 +302,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm*:riscos:*:*|arm*:RISCOS:*:*)
+    arm:riscos:*:*|arm:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -383,16 +340,16 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	eval $set_cc_for_build
-	SUN_ARCH=i386
+	SUN_ARCH="i386"
 	# If there is a compiler, see if it is configured for 64-bit objects.
 	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
 	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
 	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
 		grep IS_64BIT_ARCH >/dev/null
 	    then
-		SUN_ARCH=x86_64
+		SUN_ARCH="x86_64"
 	    fi
 	fi
 	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
@@ -417,7 +374,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
 	case "`/bin/arch`" in
 	    sun3)
 		echo m68k-sun-sunos${UNAME_RELEASE}
@@ -603,9 +560,8 @@ EOF
 	else
 		IBM_ARCH=powerpc
 	fi
-	if [ -x /usr/bin/lslpp ] ; then
-		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
-			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
 	else
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
@@ -642,13 +598,13 @@ EOF
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
 		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
 		    case "${sc_cpu_version}" in
-		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
 		      532)                      # CPU_PA_RISC2_0
 			case "${sc_kernel_bits}" in
-			  32) HP_ARCH=hppa2.0n ;;
-			  64) HP_ARCH=hppa2.0w ;;
-			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
 			esac ;;
 		    esac
 		fi
@@ -687,11 +643,11 @@ EOF
 		    exit (0);
 		}
 EOF
-		    (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
 		fi ;;
 	esac
-	if [ ${HP_ARCH} = hppa2.0w ]
+	if [ ${HP_ARCH} = "hppa2.0w" ]
 	then
 	    eval $set_cc_for_build
 
@@ -704,12 +660,12 @@ EOF
 	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
 	    # => hppa64-hp-hpux11.23
 
-	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
 		grep -q __LP64__
 	    then
-		HP_ARCH=hppa2.0w
+		HP_ARCH="hppa2.0w"
 	    else
-		HP_ARCH=hppa64
+		HP_ARCH="hppa64"
 	    fi
 	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
@@ -814,14 +770,14 @@ EOF
 	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
-	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
 	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
 	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
 	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
@@ -845,13 +801,10 @@ EOF
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    *:MINGW64*:*)
-	echo ${UNAME_MACHINE}-pc-mingw64
-	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
-    *:MSYS*:*)
+    i*:MSYS*:*)
 	echo ${UNAME_MACHINE}-pc-msys
 	exit ;;
     i*:windows32*:*)
@@ -899,21 +852,21 @@ EOF
 	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     aarch64_be:Linux:*:*)
 	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -926,60 +879,59 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
 	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    arc:Linux:*:* | arceb:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
-	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
 	else
 	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
 		| grep -q __ARM_PCS_VFP
 	    then
-		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
 	    else
-		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
 	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
-	exit ;;
-    e2k:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     i*86:Linux:*:*)
-	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	LIBC=gnu
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    k1om:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -998,69 +950,54 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
-    mips64el:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    openrisc*:Linux:*:*)
-	echo or1k-unknown-linux-${LIBC}
-	exit ;;
-    or32:Linux:*:* | or1k*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+    or32:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     padre:Linux:*:*)
-	echo sparc-unknown-linux-${LIBC}
+	echo sparc-unknown-linux-gnu
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-${LIBC}
+	echo hppa64-unknown-linux-gnu
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
-	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
-	  *)    echo hppa-unknown-linux-${LIBC} ;;
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-${LIBC}
+	echo powerpc64-unknown-linux-gnu
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-${LIBC}
-	exit ;;
-    ppc64le:Linux:*:*)
-	echo powerpc64le-unknown-linux-${LIBC}
-	exit ;;
-    ppcle:Linux:*:*)
-	echo powerpcle-unknown-linux-${LIBC}
-	exit ;;
-    riscv32:Linux:*:* | riscv64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo powerpc-unknown-linux-gnu
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
     sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	echo ${UNAME_MACHINE}-dec-linux-gnu
 	exit ;;
     x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1136,7 +1073,7 @@ EOF
 	# uname -m prints for DJGPP always 'pc', but it prints nothing about
 	# the processor, so we play safe by assuming i586.
 	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configure will decide that
+	# prints for the "djgpp" host, or else GDB configury will decide that
 	# this is a cross-build.
 	echo i586-pc-msdosdjgpp
 	exit ;;
@@ -1264,9 +1201,6 @@ EOF
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
-    x86_64:Haiku:*:*)
-	echo x86_64-unknown-haiku
-	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1285,9 +1219,6 @@ EOF
     SX-8R:SUPER-UX:*:*)
 	echo sx8r-nec-superux${UNAME_RELEASE}
 	exit ;;
-    SX-ACE:SUPER-UX:*:*)
-	echo sxace-nec-superux${UNAME_RELEASE}
-	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1296,36 +1227,24 @@ EOF
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	eval $set_cc_for_build
-	if test "$UNAME_PROCESSOR" = unknown ; then
-	    UNAME_PROCESSOR=powerpc
-	fi
-	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
-	    if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
-		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		    (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		    grep IS_64BIT_ARCH >/dev/null
-		then
-		    case $UNAME_PROCESSOR in
-			i386) UNAME_PROCESSOR=x86_64 ;;
-			powerpc) UNAME_PROCESSOR=powerpc64 ;;
-		    esac
-		fi
-	    fi
-	elif test "$UNAME_PROCESSOR" = i386 ; then
-	    # Avoid executing cc on OS X 10.9, as it ships with a stub
-	    # that puts up a graphical alert prompting to install
-	    # developer tools.  Any system running Mac OS X 10.7 or
-	    # later (Darwin 11 and later) is required to have a 64-bit
-	    # processor. This is not true of the ARM version of Darwin
-	    # that Apple uses in portable devices.
-	    UNAME_PROCESSOR=x86_64
-	fi
+	case $UNAME_PROCESSOR in
+	    i386)
+		eval $set_cc_for_build
+		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		      grep IS_64BIT_ARCH >/dev/null
+		  then
+		      UNAME_PROCESSOR="x86_64"
+		  fi
+		fi ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
 	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = x86; then
+	if test "$UNAME_PROCESSOR" = "x86"; then
 		UNAME_PROCESSOR=i386
 		UNAME_MACHINE=pc
 	fi
@@ -1337,7 +1256,7 @@ EOF
     NEO-?:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSE-*:NONSTOP_KERNEL:*:*)
+    NSE-?:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1356,7 +1275,7 @@ EOF
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
 	# operating systems.
-	if test "$cputype" = 386; then
+	if test "$cputype" = "386"; then
 	    UNAME_MACHINE=i386
 	else
 	    UNAME_MACHINE="$cputype"
@@ -1398,7 +1317,7 @@ EOF
 	echo i386-pc-xenix
 	exit ;;
     i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'`
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
 	exit ;;
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
@@ -1409,25 +1328,174 @@ EOF
     x86_64:VMkernel:*:*)
 	echo ${UNAME_MACHINE}-unknown-esx
 	exit ;;
-    amd64:Isilon\ OneFS:*:*)
-	echo x86_64-unknown-onefs
-	exit ;;
 esac
 
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+	"4"
+#else
+	""
+#endif
+	); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
 cat >&2 <<EOF
 $0: unable to guess system type
 
-This script (version $timestamp), has failed to recognize the
-operating system you are using. If your script is old, overwrite
-config.guess and config.sub with the latest versions from:
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
 
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
-If $0 has already been updated, send the following data and any
-information you think might be pertinent to config-patches@gnu.org to
-provide the necessary information to handle your system.
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
 
 config.guess timestamp = $timestamp
 

deps/jemalloc/config.sub

@@ -1,18 +1,24 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright 1992-2016 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2016-11-04'
+timestamp='2012-02-10'
 
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, see <http://www.gnu.org/licenses/>.
@@ -20,12 +26,11 @@ timestamp='2016-11-04'
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
+# the same distribution terms that you use for the rest of that program.
 
 
-# Please send patches to <config-patches@gnu.org>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -33,7 +38,7 @@ timestamp='2016-11-04'
 # Otherwise, we print the canonical config type on stdout and succeed.
 
 # You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
@@ -53,7 +58,8 @@ timestamp='2016-11-04'
 me=`echo "$0" | sed -e 's,.*/,,'`
 
 usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
 
 Canonicalize a configuration name.
 
@@ -67,7 +73,9 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright 1992-2016 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -115,9 +123,9 @@ esac
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
-  kopensolaris*-gnu* | cloudabi*-eabi* | \
+  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
@@ -148,7 +156,7 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze*)
+	-apple | -axis | -knuth | -cray | -microblaze)
 		os=
 		basic_machine=$1
 		;;
@@ -217,12 +225,6 @@ case $os in
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
-	-lynx*178)
-		os=-lynxos178
-		;;
-	-lynx*5)
-		os=-lynxos5
-		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -251,25 +253,21 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arceb \
-	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
-	| avr | avr32 \
-	| ba \
-	| be32 | be64 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+        | be32 | be64 \
 	| bfin \
-	| c4x | c8051 | clipper \
+	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| e2k | epiphany \
-	| fido | fr30 | frv | ft32 \
+	| epiphany \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| k1om \
 	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| maxq | mb | microblaze | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -283,30 +281,26 @@ case $basic_machine in
 	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa32r6 | mipsisa32r6el \
 	| mipsisa64 | mipsisa64el \
 	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64r6 | mipsisa64r6el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipsr5900 | mipsr5900el \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
 	| moxie \
 	| mt \
 	| msp430 \
 	| nds32 | nds32le | nds32be \
-	| nios | nios2 | nios2eb | nios2el \
+	| nios | nios2 \
 	| ns16k | ns32k \
-	| open8 | or1k | or1knd | or32 \
+	| open8 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
-	| pru \
 	| pyramid \
-	| riscv32 | riscv64 \
 	| rl78 | rx \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -314,7 +308,6 @@ case $basic_machine in
 	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
 	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
-	| visium \
 	| we32k \
 	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
@@ -329,10 +322,7 @@ case $basic_machine in
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
-	leon|leon[3-9])
-		basic_machine=sparc-$basic_machine
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -374,29 +364,26 @@ case $basic_machine in
 	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
-	| ba-* \
 	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| c8051-* | clipper-* | craynv-* | cydra-* \
+	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
-	| e2k-* | elxsi-* \
+	| elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| k1om-* \
 	| le32-* | le64-* \
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
-	| microblaze-* | microblazeel-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -410,34 +397,28 @@ case $basic_machine in
 	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa32r6-* | mipsisa32r6el-* \
 	| mipsisa64-* | mipsisa64el-* \
 	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64r6-* | mipsisa64r6el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipsr5900-* | mipsr5900el-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
 	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| open8-* \
-	| or1k*-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
-	| pru-* \
 	| pyramid-* \
-	| riscv32-* | riscv64-* \
 	| rl78-* | romp-* | rs6000-* | rx-* \
 	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
 	| tahoe-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tile*-* \
@@ -445,7 +426,6 @@ case $basic_machine in
 	| ubicom32-* \
 	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
 	| vax-* \
-	| visium-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
@@ -522,9 +502,6 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-aros
 		;;
-	asmjs)
-		basic_machine=asmjs-unknown
-		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -645,14 +622,6 @@ case $basic_machine in
 		basic_machine=m68k-bull
 		os=-sysv3
 		;;
-	e500v[12])
-		basic_machine=powerpc-unknown
-		os=$os"spe"
-		;;
-	e500v[12]-*)
-		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		os=$os"spe"
-		;;
 	ebmon29k)
 		basic_machine=a29k-amd
 		os=-ebmon
@@ -794,9 +763,6 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
-	leon-*|leon[3-9]-*)
-		basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
-		;;
 	m68knommu)
 		basic_machine=m68k-unknown
 		os=-linux
@@ -816,15 +782,11 @@ case $basic_machine in
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-	microblaze*)
+	microblaze)
 		basic_machine=microblaze-xilinx
 		;;
-	mingw64)
-		basic_machine=x86_64-pc
-		os=-mingw64
-		;;
 	mingw32)
-		basic_machine=i686-pc
+		basic_machine=i386-pc
 		os=-mingw32
 		;;
 	mingw32ce)
@@ -852,10 +814,6 @@ case $basic_machine in
 		basic_machine=powerpc-unknown
 		os=-morphos
 		;;
-	moxiebox)
-		basic_machine=moxie-unknown
-		os=-moxiebox
-		;;
 	msdos)
 		basic_machine=i386-pc
 		os=-msdos
@@ -864,7 +822,7 @@ case $basic_machine in
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
 	msys)
-		basic_machine=i686-pc
+		basic_machine=i386-pc
 		os=-msys
 		;;
 	mvs)
@@ -1032,7 +990,7 @@ case $basic_machine in
 	ppc-* | ppcbe-*)
 		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	ppcle | powerpclittle)
+	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
 		;;
 	ppcle-* | powerpclittle-*)
@@ -1042,7 +1000,7 @@ case $basic_machine in
 		;;
 	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	ppc64le | powerpc64little)
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
 		basic_machine=powerpc64le-unknown
 		;;
 	ppc64le-* | powerpc64little-*)
@@ -1055,11 +1013,7 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos | rdos64)
-		basic_machine=x86_64-pc
-		os=-rdos
-		;;
-	rdos32)
+	rdos)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1386,30 +1340,29 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* | -plan9* \
+	      | -sym* | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* | -cloudabi* | -sortix* \
+	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+	      | -mingw32* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
-	      | -onefs* | -tirtos* | -phoenix* | -fuchsia*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1533,6 +1486,9 @@ case $os in
 	-aros*)
 		os=-aros
 		;;
+	-kaos*)
+		os=-kaos
+		;;
 	-zvmoe)
 		os=-zvmoe
 		;;
@@ -1541,8 +1497,6 @@ case $os in
 		;;
 	-nacl*)
 		;;
-	-ios)
-		;;
 	-none)
 		;;
 	*)
@@ -1583,12 +1537,6 @@ case $basic_machine in
 	c4x-* | tic4x-*)
 		os=-coff
 		;;
-	c8051-*)
-		os=-elf
-		;;
-	hexagon-*)
-		os=-elf
-		;;
 	tic54x-*)
 		os=-coff
 		;;

deps/jemalloc/doc/html.xsl.in

@@ -1,5 +1,4 @@
 <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
   <xsl:import href="@XSLROOT@/html/docbook.xsl"/>
   <xsl:import href="@abs_srcroot@doc/stylesheet.xsl"/>
-  <xsl:output method="xml" encoding="utf-8"/>
 </xsl:stylesheet>

deps/jemalloc/doc/stylesheet.xsl

@@ -1,10 +1,7 @@
 <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
   <xsl:param name="funcsynopsis.style">ansi</xsl:param>
-  <xsl:param name="function.parens" select="0"/>
-  <xsl:template match="function">
-    <xsl:call-template name="inline.monoseq"/>
-  </xsl:template>
+  <xsl:param name="function.parens" select="1"/>
   <xsl:template match="mallctl">
-    <quote><xsl:call-template name="inline.monoseq"/></quote>
+    "<xsl:call-template name="inline.monoseq"/>"
   </xsl:template>
 </xsl:stylesheet>

deps/jemalloc/include/jemalloc/internal/arena.h

@@ -0,0 +1,975 @@
+/******************************************************************************/
+#ifdef JEMALLOC_H_TYPES
+
+/*
+ * RUN_MAX_OVRHD indicates maximum desired run header overhead.  Runs are sized
+ * as small as possible such that this setting is still honored, without
+ * violating other constraints.  The goal is to make runs as small as possible
+ * without exceeding a per run external fragmentation threshold.
+ *
+ * We use binary fixed point math for overhead computations, where the binary
+ * point is implicitly RUN_BFP bits to the left.
+ *
+ * Note that it is possible to set RUN_MAX_OVRHD low enough that it cannot be
+ * honored for some/all object sizes, since when heap profiling is enabled
+ * there is one pointer of header overhead per object (plus a constant).  This
+ * constraint is relaxed (ignored) for runs that are so small that the
+ * per-region overhead is greater than:
+ *
+ *   (RUN_MAX_OVRHD / (reg_interval << (3+RUN_BFP))
+ */
+#define	RUN_BFP			12
+/*                                    \/   Implicit binary fixed point. */
+#define	RUN_MAX_OVRHD		0x0000003dU
+#define	RUN_MAX_OVRHD_RELAX	0x00001800U
+
+/* Maximum number of regions in one run. */
+#define	LG_RUN_MAXREGS		11
+#define	RUN_MAXREGS		(1U << LG_RUN_MAXREGS)
+
+/*
+ * Minimum redzone size.  Redzones may be larger than this if necessary to
+ * preserve region alignment.
+ */
+#define	REDZONE_MINSIZE		16
+
+/*
+ * The minimum ratio of active:dirty pages per arena is computed as:
+ *
+ *   (nactive >> opt_lg_dirty_mult) >= ndirty
+ *
+ * So, supposing that opt_lg_dirty_mult is 3, there can be no less than 8 times
+ * as many active pages as dirty pages.
+ */
+#define	LG_DIRTY_MULT_DEFAULT	3
+
+typedef struct arena_chunk_map_s arena_chunk_map_t;
+typedef struct arena_chunk_s arena_chunk_t;
+typedef struct arena_run_s arena_run_t;
+typedef struct arena_bin_info_s arena_bin_info_t;
+typedef struct arena_bin_s arena_bin_t;
+typedef struct arena_s arena_t;
+
+#endif /* JEMALLOC_H_TYPES */
+/******************************************************************************/
+#ifdef JEMALLOC_H_STRUCTS
+
+/* Each element of the chunk map corresponds to one page within the chunk. */
+struct arena_chunk_map_s {
+#ifndef JEMALLOC_PROF
+	/*
+	 * Overlay prof_ctx in order to allow it to be referenced by dead code.
+	 * Such antics aren't warranted for per arena data structures, but
+	 * chunk map overhead accounts for a percentage of memory, rather than
+	 * being just a fixed cost.
+	 */
+	union {
+#endif
+	union {
+		/*
+		 * Linkage for run trees.  There are two disjoint uses:
+		 *
+		 * 1) arena_t's runs_avail tree.
+		 * 2) arena_run_t conceptually uses this linkage for in-use
+		 *    non-full runs, rather than directly embedding linkage.
+		 */
+		rb_node(arena_chunk_map_t)	rb_link;
+		/*
+		 * List of runs currently in purgatory.  arena_chunk_purge()
+		 * temporarily allocates runs that contain dirty pages while
+		 * purging, so that other threads cannot use the runs while the
+		 * purging thread is operating without the arena lock held.
+		 */
+		ql_elm(arena_chunk_map_t)	ql_link;
+	}				u;
+
+	/* Profile counters, used for large object runs. */
+	prof_ctx_t			*prof_ctx;
+#ifndef JEMALLOC_PROF
+	}; /* union { ... }; */
+#endif
+
+	/*
+	 * Run address (or size) and various flags are stored together.  The bit
+	 * layout looks like (assuming 32-bit system):
+	 *
+	 *   ???????? ???????? ????nnnn nnnndula
+	 *
+	 * ? : Unallocated: Run address for first/last pages, unset for internal
+	 *                  pages.
+	 *     Small: Run page offset.
+	 *     Large: Run size for first page, unset for trailing pages.
+	 * n : binind for small size class, BININD_INVALID for large size class.
+	 * d : dirty?
+	 * u : unzeroed?
+	 * l : large?
+	 * a : allocated?
+	 *
+	 * Following are example bit patterns for the three types of runs.
+	 *
+	 * p : run page offset
+	 * s : run size
+	 * n : binind for size class; large objects set these to BININD_INVALID
+	 *     except for promoted allocations (see prof_promote)
+	 * x : don't care
+	 * - : 0
+	 * + : 1
+	 * [DULA] : bit set
+	 * [dula] : bit unset
+	 *
+	 *   Unallocated (clean):
+	 *     ssssssss ssssssss ssss++++ ++++du-a
+	 *     xxxxxxxx xxxxxxxx xxxxxxxx xxxx-Uxx
+	 *     ssssssss ssssssss ssss++++ ++++dU-a
+	 *
+	 *   Unallocated (dirty):
+	 *     ssssssss ssssssss ssss++++ ++++D--a
+	 *     xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
+	 *     ssssssss ssssssss ssss++++ ++++D--a
+	 *
+	 *   Small:
+	 *     pppppppp pppppppp ppppnnnn nnnnd--A
+	 *     pppppppp pppppppp ppppnnnn nnnn---A
+	 *     pppppppp pppppppp ppppnnnn nnnnd--A
+	 *
+	 *   Large:
+	 *     ssssssss ssssssss ssss++++ ++++D-LA
+	 *     xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
+	 *     -------- -------- ----++++ ++++D-LA
+	 *
+	 *   Large (sampled, size <= PAGE):
+	 *     ssssssss ssssssss ssssnnnn nnnnD-LA
+	 *
+	 *   Large (not sampled, size == PAGE):
+	 *     ssssssss ssssssss ssss++++ ++++D-LA
+	 */
+	size_t				bits;
+#define	CHUNK_MAP_BININD_SHIFT	4
+#define	BININD_INVALID		((size_t)0xffU)
+/*     CHUNK_MAP_BININD_MASK == (BININD_INVALID << CHUNK_MAP_BININD_SHIFT) */
+#define	CHUNK_MAP_BININD_MASK	((size_t)0xff0U)
+#define	CHUNK_MAP_BININD_INVALID CHUNK_MAP_BININD_MASK
+#define	CHUNK_MAP_FLAGS_MASK	((size_t)0xcU)
+#define	CHUNK_MAP_DIRTY		((size_t)0x8U)
+#define	CHUNK_MAP_UNZEROED	((size_t)0x4U)
+#define	CHUNK_MAP_LARGE		((size_t)0x2U)
+#define	CHUNK_MAP_ALLOCATED	((size_t)0x1U)
+#define	CHUNK_MAP_KEY		CHUNK_MAP_ALLOCATED
+};
+typedef rb_tree(arena_chunk_map_t) arena_avail_tree_t;
+typedef rb_tree(arena_chunk_map_t) arena_run_tree_t;
+
+/* Arena chunk header. */
+struct arena_chunk_s {
+	/* Arena that owns the chunk. */
+	arena_t			*arena;
+
+	/* Linkage for tree of arena chunks that contain dirty runs. */
+	rb_node(arena_chunk_t)	dirty_link;
+
+	/* Number of dirty pages. */
+	size_t			ndirty;
+
+	/* Number of available runs. */
+	size_t			nruns_avail;
+
+	/*
+	 * Number of available run adjacencies.  Clean and dirty available runs
+	 * are not coalesced, which causes virtual memory fragmentation.  The
+	 * ratio of (nruns_avail-nruns_adjac):nruns_adjac is used for tracking
+	 * this fragmentation.
+	 * */
+	size_t			nruns_adjac;
+
+	/*
+	 * Map of pages within chunk that keeps track of free/large/small.  The
+	 * first map_bias entries are omitted, since the chunk header does not
+	 * need to be tracked in the map.  This omission saves a header page
+	 * for common chunk sizes (e.g. 4 MiB).
+	 */
+	arena_chunk_map_t	map[1]; /* Dynamically sized. */
+};
+typedef rb_tree(arena_chunk_t) arena_chunk_tree_t;
+
+struct arena_run_s {
+	/* Bin this run is associated with. */
+	arena_bin_t	*bin;
+
+	/* Index of next region that has never been allocated, or nregs. */
+	uint32_t	nextind;
+
+	/* Number of free regions in run. */
+	unsigned	nfree;
+};
+
+/*
+ * Read-only information associated with each element of arena_t's bins array
+ * is stored separately, partly to reduce memory usage (only one copy, rather
+ * than one per arena), but mainly to avoid false cacheline sharing.
+ *
+ * Each run has the following layout:
+ *
+ *               /--------------------\
+ *               | arena_run_t header |
+ *               | ...                |
+ * bitmap_offset | bitmap             |
+ *               | ...                |
+ *   ctx0_offset | ctx map            |
+ *               | ...                |
+ *               |--------------------|
+ *               | redzone            |
+ *   reg0_offset | region 0           |
+ *               | redzone            |
+ *               |--------------------| \
+ *               | redzone            | |
+ *               | region 1           |  > reg_interval
+ *               | redzone            | /
+ *               |--------------------|
+ *               | ...                |
+ *               | ...                |
+ *               | ...                |
+ *               |--------------------|
+ *               | redzone            |
+ *               | region nregs-1     |
+ *               | redzone            |
+ *               |--------------------|
+ *               | alignment pad?     |
+ *               \--------------------/
+ *
+ * reg_interval has at least the same minimum alignment as reg_size; this
+ * preserves the alignment constraint that sa2u() depends on.  Alignment pad is
+ * either 0 or redzone_size; it is present only if needed to align reg0_offset.
+ */
+struct arena_bin_info_s {
+	/* Size of regions in a run for this bin's size class. */
+	size_t		reg_size;
+
+	/* Redzone size. */
+	size_t		redzone_size;
+
+	/* Interval between regions (reg_size + (redzone_size << 1)). */
+	size_t		reg_interval;
+
+	/* Total size of a run for this bin's size class. */
+	size_t		run_size;
+
+	/* Total number of regions in a run for this bin's size class. */
+	uint32_t	nregs;
+
+	/*
+	 * Offset of first bitmap_t element in a run header for this bin's size
+	 * class.
+	 */
+	uint32_t	bitmap_offset;
+
+	/*
+	 * Metadata used to manipulate bitmaps for runs associated with this
+	 * bin.
+	 */
+	bitmap_info_t	bitmap_info;
+
+	/*
+	 * Offset of first (prof_ctx_t *) in a run header for this bin's size
+	 * class, or 0 if (config_prof == false || opt_prof == false).
+	 */
+	uint32_t	ctx0_offset;
+
+	/* Offset of first region in a run for this bin's size class. */
+	uint32_t	reg0_offset;
+};
+
+struct arena_bin_s {
+	/*
+	 * All operations on runcur, runs, and stats require that lock be
+	 * locked.  Run allocation/deallocation are protected by the arena lock,
+	 * which may be acquired while holding one or more bin locks, but not
+	 * vise versa.
+	 */
+	malloc_mutex_t	lock;
+
+	/*
+	 * Current run being used to service allocations of this bin's size
+	 * class.
+	 */
+	arena_run_t	*runcur;
+
+	/*
+	 * Tree of non-full runs.  This tree is used when looking for an
+	 * existing run when runcur is no longer usable.  We choose the
+	 * non-full run that is lowest in memory; this policy tends to keep
+	 * objects packed well, and it can also help reduce the number of
+	 * almost-empty chunks.
+	 */
+	arena_run_tree_t runs;
+
+	/* Bin statistics. */
+	malloc_bin_stats_t stats;
+};
+
+struct arena_s {
+	/* This arena's index within the arenas array. */
+	unsigned		ind;
+
+	/*
+	 * Number of threads currently assigned to this arena.  This field is
+	 * protected by arenas_lock.
+	 */
+	unsigned		nthreads;
+
+	/*
+	 * There are three classes of arena operations from a locking
+	 * perspective:
+	 * 1) Thread asssignment (modifies nthreads) is protected by
+	 *    arenas_lock.
+	 * 2) Bin-related operations are protected by bin locks.
+	 * 3) Chunk- and run-related operations are protected by this mutex.
+	 */
+	malloc_mutex_t		lock;
+
+	arena_stats_t		stats;
+	/*
+	 * List of tcaches for extant threads associated with this arena.
+	 * Stats from these are merged incrementally, and at exit.
+	 */
+	ql_head(tcache_t)	tcache_ql;
+
+	uint64_t		prof_accumbytes;
+
+	dss_prec_t		dss_prec;
+
+	/* Tree of dirty-page-containing chunks this arena manages. */
+	arena_chunk_tree_t	chunks_dirty;
+
+	/*
+	 * In order to avoid rapid chunk allocation/deallocation when an arena
+	 * oscillates right on the cusp of needing a new chunk, cache the most
+	 * recently freed chunk.  The spare is left in the arena's chunk trees
+	 * until it is deleted.
+	 *
+	 * There is one spare chunk per arena, rather than one spare total, in
+	 * order to avoid interactions between multiple threads that could make
+	 * a single spare inadequate.
+	 */
+	arena_chunk_t		*spare;
+
+	/* Number of pages in active runs. */
+	size_t			nactive;
+
+	/*
+	 * Current count of pages within unused runs that are potentially
+	 * dirty, and for which madvise(... MADV_DONTNEED) has not been called.
+	 * By tracking this, we can institute a limit on how much dirty unused
+	 * memory is mapped for each arena.
+	 */
+	size_t			ndirty;
+
+	/*
+	 * Approximate number of pages being purged.  It is possible for
+	 * multiple threads to purge dirty pages concurrently, and they use
+	 * npurgatory to indicate the total number of pages all threads are
+	 * attempting to purge.
+	 */
+	size_t			npurgatory;
+
+	/*
+	 * Size/address-ordered trees of this arena's available runs.  The trees
+	 * are used for first-best-fit run allocation.
+	 */
+	arena_avail_tree_t	runs_avail;
+
+	/* bins is used to store trees of free regions. */
+	arena_bin_t		bins[NBINS];
+};
+
+#endif /* JEMALLOC_H_STRUCTS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_EXTERNS
+
+extern ssize_t	opt_lg_dirty_mult;
+/*
+ * small_size2bin is a compact lookup table that rounds request sizes up to
+ * size classes.  In order to reduce cache footprint, the table is compressed,
+ * and all accesses are via the SMALL_SIZE2BIN macro.
+ */
+extern uint8_t const	small_size2bin[];
+#define	SMALL_SIZE2BIN(s)	(small_size2bin[(s-1) >> LG_TINY_MIN])
+
+extern arena_bin_info_t	arena_bin_info[NBINS];
+
+/* Number of large size classes. */
+#define			nlclasses (chunk_npages - map_bias)
+
+void	arena_purge_all(arena_t *arena);
+void	arena_prof_accum(arena_t *arena, uint64_t accumbytes);
+void	arena_tcache_fill_small(arena_t *arena, tcache_bin_t *tbin,
+    size_t binind, uint64_t prof_accumbytes);
+void	arena_alloc_junk_small(void *ptr, arena_bin_info_t *bin_info,
+    bool zero);
+void	arena_dalloc_junk_small(void *ptr, arena_bin_info_t *bin_info);
+void	*arena_malloc_small(arena_t *arena, size_t size, bool zero);
+void	*arena_malloc_large(arena_t *arena, size_t size, bool zero);
+void	*arena_palloc(arena_t *arena, size_t size, size_t alignment, bool zero);
+void	arena_prof_promoted(const void *ptr, size_t size);
+void	arena_dalloc_bin_locked(arena_t *arena, arena_chunk_t *chunk, void *ptr,
+    arena_chunk_map_t *mapelm);
+void	arena_dalloc_bin(arena_t *arena, arena_chunk_t *chunk, void *ptr,
+    size_t pageind, arena_chunk_map_t *mapelm);
+void	arena_dalloc_small(arena_t *arena, arena_chunk_t *chunk, void *ptr,
+    size_t pageind);
+void	arena_dalloc_large_locked(arena_t *arena, arena_chunk_t *chunk,
+    void *ptr);
+void	arena_dalloc_large(arena_t *arena, arena_chunk_t *chunk, void *ptr);
+void	*arena_ralloc_no_move(void *ptr, size_t oldsize, size_t size,
+    size_t extra, bool zero);
+void	*arena_ralloc(arena_t *arena, void *ptr, size_t oldsize, size_t size,
+    size_t extra, size_t alignment, bool zero, bool try_tcache_alloc,
+    bool try_tcache_dalloc);
+dss_prec_t	arena_dss_prec_get(arena_t *arena);
+void	arena_dss_prec_set(arena_t *arena, dss_prec_t dss_prec);
+void	arena_stats_merge(arena_t *arena, const char **dss, size_t *nactive,
+    size_t *ndirty, arena_stats_t *astats, malloc_bin_stats_t *bstats,
+    malloc_large_stats_t *lstats);
+bool	arena_new(arena_t *arena, unsigned ind);
+void	arena_boot(void);
+void	arena_prefork(arena_t *arena);
+void	arena_postfork_parent(arena_t *arena);
+void	arena_postfork_child(arena_t *arena);
+
+#endif /* JEMALLOC_H_EXTERNS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_INLINES
+
+#ifndef JEMALLOC_ENABLE_INLINE
+arena_chunk_map_t	*arena_mapp_get(arena_chunk_t *chunk, size_t pageind);
+size_t	*arena_mapbitsp_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_unallocated_size_get(arena_chunk_t *chunk,
+    size_t pageind);
+size_t	arena_mapbits_large_size_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_small_runind_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_binind_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_dirty_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_unzeroed_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_large_get(arena_chunk_t *chunk, size_t pageind);
+size_t	arena_mapbits_allocated_get(arena_chunk_t *chunk, size_t pageind);
+void	arena_mapbits_unallocated_set(arena_chunk_t *chunk, size_t pageind,
+    size_t size, size_t flags);
+void	arena_mapbits_unallocated_size_set(arena_chunk_t *chunk, size_t pageind,
+    size_t size);
+void	arena_mapbits_large_set(arena_chunk_t *chunk, size_t pageind,
+    size_t size, size_t flags);
+void	arena_mapbits_large_binind_set(arena_chunk_t *chunk, size_t pageind,
+    size_t binind);
+void	arena_mapbits_small_set(arena_chunk_t *chunk, size_t pageind,
+    size_t runind, size_t binind, size_t flags);
+void	arena_mapbits_unzeroed_set(arena_chunk_t *chunk, size_t pageind,
+    size_t unzeroed);
+size_t	arena_ptr_small_binind_get(const void *ptr, size_t mapbits);
+size_t	arena_bin_index(arena_t *arena, arena_bin_t *bin);
+unsigned	arena_run_regind(arena_run_t *run, arena_bin_info_t *bin_info,
+    const void *ptr);
+prof_ctx_t	*arena_prof_ctx_get(const void *ptr);
+void	arena_prof_ctx_set(const void *ptr, prof_ctx_t *ctx);
+void	*arena_malloc(arena_t *arena, size_t size, bool zero, bool try_tcache);
+size_t	arena_salloc(const void *ptr, bool demote);
+void	arena_dalloc(arena_t *arena, arena_chunk_t *chunk, void *ptr,
+    bool try_tcache);
+#endif
+
+#if (defined(JEMALLOC_ENABLE_INLINE) || defined(JEMALLOC_ARENA_C_))
+#  ifdef JEMALLOC_ARENA_INLINE_A
+JEMALLOC_INLINE arena_chunk_map_t *
+arena_mapp_get(arena_chunk_t *chunk, size_t pageind)
+{
+
+	assert(pageind >= map_bias);
+	assert(pageind < chunk_npages);
+
+	return (&chunk->map[pageind-map_bias]);
+}
+
+JEMALLOC_INLINE size_t *
+arena_mapbitsp_get(arena_chunk_t *chunk, size_t pageind)
+{
+
+	return (&arena_mapp_get(chunk, pageind)->bits);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_get(arena_chunk_t *chunk, size_t pageind)
+{
+
+	return (*arena_mapbitsp_get(chunk, pageind));
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_unallocated_size_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	assert((mapbits & (CHUNK_MAP_LARGE|CHUNK_MAP_ALLOCATED)) == 0);
+	return (mapbits & ~PAGE_MASK);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_large_size_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	assert((mapbits & (CHUNK_MAP_LARGE|CHUNK_MAP_ALLOCATED)) ==
+	    (CHUNK_MAP_LARGE|CHUNK_MAP_ALLOCATED));
+	return (mapbits & ~PAGE_MASK);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_small_runind_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	assert((mapbits & (CHUNK_MAP_LARGE|CHUNK_MAP_ALLOCATED)) ==
+	    CHUNK_MAP_ALLOCATED);
+	return (mapbits >> LG_PAGE);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_binind_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+	size_t binind;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	binind = (mapbits & CHUNK_MAP_BININD_MASK) >> CHUNK_MAP_BININD_SHIFT;
+	assert(binind < NBINS || binind == BININD_INVALID);
+	return (binind);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_dirty_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	return (mapbits & CHUNK_MAP_DIRTY);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_unzeroed_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	return (mapbits & CHUNK_MAP_UNZEROED);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_large_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	return (mapbits & CHUNK_MAP_LARGE);
+}
+
+JEMALLOC_INLINE size_t
+arena_mapbits_allocated_get(arena_chunk_t *chunk, size_t pageind)
+{
+	size_t mapbits;
+
+	mapbits = arena_mapbits_get(chunk, pageind);
+	return (mapbits & CHUNK_MAP_ALLOCATED);
+}
+
+JEMALLOC_INLINE void
+arena_mapbits_unallocated_set(arena_chunk_t *chunk, size_t pageind, size_t size,
+    size_t flags)
+{
+	size_t *mapbitsp;
+
+	mapbitsp = arena_mapbitsp_get(chunk, pageind);
+	assert((size & PAGE_MASK) == 0);
+	assert((flags & ~CHUNK_MAP_FLAGS_MASK) == 0);
+	assert((flags & (CHUNK_MAP_DIRTY|CHUNK_MAP_UNZEROED)) == flags);
+	*mapbitsp = size | CHUNK_MAP_BININD_INVALID | flags;
+}
+
+JEMALLOC_INLINE void
+arena_mapbits_unallocated_size_set(arena_chunk_t *chunk, size_t pageind,
+    size_t size)
+{
+	size_t *mapbitsp;
+
+	mapbitsp = arena_mapbitsp_get(chunk, pageind);
+	assert((size & PAGE_MASK) == 0);
+	assert((*mapbitsp & (CHUNK_MAP_LARGE|CHUNK_MAP_ALLOCATED)) == 0);
+	*mapbitsp = size | (*mapbitsp & PAGE_MASK);
+}
+
+JEMALLOC_INLINE void
+arena_mapbits_large_set(arena_chunk_t *chunk, size_t pageind, size_t size,
+    size_t flags)
+{
+	size_t *mapbitsp;
+	size_t unzeroed;
+
+	mapbitsp = arena_mapbitsp_get(chunk, pageind);
+	assert((size & PAGE_MASK) == 0);
+	assert((flags & CHUNK_MAP_DIRTY) == flags);
+	unzeroed = *mapbitsp & CHUNK_MAP_UNZEROED; /* Preserve unzeroed. */
+	*mapbitsp = size | CHUNK_MAP_BININD_INVALID | flags | unzeroed |
+	    CHUNK_MAP_LARGE | CHUNK_MAP_ALLOCATED;
+}
+
+JEMALLOC_INLINE void
+arena_mapbits_large_binind_set(arena_chunk_t *chunk, size_t pageind,
+    size_t binind)
+{
+	size_t *mapbitsp;
+
+	assert(binind <= BININD_INVALID);
+	mapbitsp = arena_mapbitsp_get(chunk, pageind);
+	assert(arena_mapbits_large_size_get(chunk, pageind) == PAGE);
+	*mapbitsp = (*mapbitsp & ~CHUNK_MAP_BININD_MASK) | (binind <<
+	    CHUNK_MAP_BININD_SHIFT);
+}
+
+JEMALLOC_INLINE void
+arena_mapbits_small_set(arena_chunk_t *chunk, size_t pageind, size_t runind,
+    size_t binind, size_t flags)
+{
+	size_t *mapbitsp;
+	size_t unzeroed;
+
+	assert(binind < BININD_INVALID);
+	mapbitsp = arena_mapbitsp_get(chunk, pageind);
+	assert(pageind - runind >= map_bias);
+	assert((flags & CHUNK_MAP_DIRTY) == flags);
+	unzeroed = *mapbitsp & CHUNK_MAP_UNZEROED; /* Preserve unzeroed. */
+	*mapbitsp = (runind << LG_PAGE) | (binind << CHUNK_MAP_BININD_SHIFT) |
+	    flags | unzeroed | CHUNK_MAP_ALLOCATED;
+}
+
+JEMALLOC_INLINE void
+arena_mapbits_unzeroed_set(arena_chunk_t *chunk, size_t pageind,
+    size_t unzeroed)
+{
+	size_t *mapbitsp;
+
+	mapbitsp = arena_mapbitsp_get(chunk, pageind);
+	*mapbitsp = (*mapbitsp & ~CHUNK_MAP_UNZEROED) | unzeroed;
+}
+
+JEMALLOC_INLINE size_t
+arena_ptr_small_binind_get(const void *ptr, size_t mapbits)
+{
+	size_t binind;
+
+	binind = (mapbits & CHUNK_MAP_BININD_MASK) >> CHUNK_MAP_BININD_SHIFT;
+
+	if (config_debug) {
+		arena_chunk_t *chunk;
+		arena_t *arena;
+		size_t pageind;
+		size_t actual_mapbits;
+		arena_run_t *run;
+		arena_bin_t *bin;
+		size_t actual_binind;
+		arena_bin_info_t *bin_info;
+
+		assert(binind != BININD_INVALID);
+		assert(binind < NBINS);
+		chunk = (arena_chunk_t *)CHUNK_ADDR2BASE(ptr);
+		arena = chunk->arena;
+		pageind = ((uintptr_t)ptr - (uintptr_t)chunk) >> LG_PAGE;
+		actual_mapbits = arena_mapbits_get(chunk, pageind);
+		assert(mapbits == actual_mapbits);
+		assert(arena_mapbits_large_get(chunk, pageind) == 0);
+		assert(arena_mapbits_allocated_get(chunk, pageind) != 0);
+		run = (arena_run_t *)((uintptr_t)chunk + (uintptr_t)((pageind -
+		    (actual_mapbits >> LG_PAGE)) << LG_PAGE));
+		bin = run->bin;
+		actual_binind = bin - arena->bins;
+		assert(binind == actual_binind);
+		bin_info = &arena_bin_info[actual_binind];
+		assert(((uintptr_t)ptr - ((uintptr_t)run +
+		    (uintptr_t)bin_info->reg0_offset)) % bin_info->reg_interval
+		    == 0);
+	}
+
+	return (binind);
+}
+#  endif /* JEMALLOC_ARENA_INLINE_A */
+
+#  ifdef JEMALLOC_ARENA_INLINE_B
+JEMALLOC_INLINE size_t
+arena_bin_index(arena_t *arena, arena_bin_t *bin)
+{
+	size_t binind = bin - arena->bins;
+	assert(binind < NBINS);
+	return (binind);
+}
+
+JEMALLOC_INLINE unsigned
+arena_run_regind(arena_run_t *run, arena_bin_info_t *bin_info, const void *ptr)
+{
+	unsigned shift, diff, regind;
+	size_t interval;
+
+	/*
+	 * Freeing a pointer lower than region zero can cause assertion
+	 * failure.
+	 */
+	assert((uintptr_t)ptr >= (uintptr_t)run +
+	    (uintptr_t)bin_info->reg0_offset);
+
+	/*
+	 * Avoid doing division with a variable divisor if possible.  Using
+	 * actual division here can reduce allocator throughput by over 20%!
+	 */
+	diff = (unsigned)((uintptr_t)ptr - (uintptr_t)run -
+	    bin_info->reg0_offset);
+
+	/* Rescale (factor powers of 2 out of the numerator and denominator). */
+	interval = bin_info->reg_interval;
+	shift = ffs(interval) - 1;
+	diff >>= shift;
+	interval >>= shift;
+
+	if (interval == 1) {
+		/* The divisor was a power of 2. */
+		regind = diff;
+	} else {
+		/*
+		 * To divide by a number D that is not a power of two we
+		 * multiply by (2^21 / D) and then right shift by 21 positions.
+		 *
+		 *   X / D
+		 *
+		 * becomes
+		 *
+		 *   (X * interval_invs[D - 3]) >> SIZE_INV_SHIFT
+		 *
+		 * We can omit the first three elements, because we never
+		 * divide by 0, and 1 and 2 are both powers of two, which are
+		 * handled above.
+		 */
+#define	SIZE_INV_SHIFT	((sizeof(unsigned) << 3) - LG_RUN_MAXREGS)
+#define	SIZE_INV(s)	(((1U << SIZE_INV_SHIFT) / (s)) + 1)
+		static const unsigned interval_invs[] = {
+		    SIZE_INV(3),
+		    SIZE_INV(4), SIZE_INV(5), SIZE_INV(6), SIZE_INV(7),
+		    SIZE_INV(8), SIZE_INV(9), SIZE_INV(10), SIZE_INV(11),
+		    SIZE_INV(12), SIZE_INV(13), SIZE_INV(14), SIZE_INV(15),
+		    SIZE_INV(16), SIZE_INV(17), SIZE_INV(18), SIZE_INV(19),
+		    SIZE_INV(20), SIZE_INV(21), SIZE_INV(22), SIZE_INV(23),
+		    SIZE_INV(24), SIZE_INV(25), SIZE_INV(26), SIZE_INV(27),
+		    SIZE_INV(28), SIZE_INV(29), SIZE_INV(30), SIZE_INV(31)
+		};
+
+		if (interval <= ((sizeof(interval_invs) / sizeof(unsigned)) +
+		    2)) {
+			regind = (diff * interval_invs[interval - 3]) >>
+			    SIZE_INV_SHIFT;
+		} else
+			regind = diff / interval;
+#undef SIZE_INV
+#undef SIZE_INV_SHIFT
+	}
+	assert(diff == regind * interval);
+	assert(regind < bin_info->nregs);
+
+	return (regind);
+}
+
+JEMALLOC_INLINE prof_ctx_t *
+arena_prof_ctx_get(const void *ptr)
+{
+	prof_ctx_t *ret;
+	arena_chunk_t *chunk;
+	size_t pageind, mapbits;
+
+	cassert(config_prof);
+	assert(ptr != NULL);
+	assert(CHUNK_ADDR2BASE(ptr) != ptr);
+
+	chunk = (arena_chunk_t *)CHUNK_ADDR2BASE(ptr);
+	pageind = ((uintptr_t)ptr - (uintptr_t)chunk) >> LG_PAGE;
+	mapbits = arena_mapbits_get(chunk, pageind);
+	assert((mapbits & CHUNK_MAP_ALLOCATED) != 0);
+	if ((mapbits & CHUNK_MAP_LARGE) == 0) {
+		if (prof_promote)
+			ret = (prof_ctx_t *)(uintptr_t)1U;
+		else {
+			arena_run_t *run = (arena_run_t *)((uintptr_t)chunk +
+			    (uintptr_t)((pageind - (mapbits >> LG_PAGE)) <<
+			    LG_PAGE));
+			size_t binind = arena_ptr_small_binind_get(ptr,
+			    mapbits);
+			arena_bin_info_t *bin_info = &arena_bin_info[binind];
+			unsigned regind;
+
+			regind = arena_run_regind(run, bin_info, ptr);
+			ret = *(prof_ctx_t **)((uintptr_t)run +
+			    bin_info->ctx0_offset + (regind *
+			    sizeof(prof_ctx_t *)));
+		}
+	} else
+		ret = arena_mapp_get(chunk, pageind)->prof_ctx;
+
+	return (ret);
+}
+
+JEMALLOC_INLINE void
+arena_prof_ctx_set(const void *ptr, prof_ctx_t *ctx)
+{
+	arena_chunk_t *chunk;
+	size_t pageind, mapbits;
+
+	cassert(config_prof);
+	assert(ptr != NULL);
+	assert(CHUNK_ADDR2BASE(ptr) != ptr);
+
+	chunk = (arena_chunk_t *)CHUNK_ADDR2BASE(ptr);
+	pageind = ((uintptr_t)ptr - (uintptr_t)chunk) >> LG_PAGE;
+	mapbits = arena_mapbits_get(chunk, pageind);
+	assert((mapbits & CHUNK_MAP_ALLOCATED) != 0);
+	if ((mapbits & CHUNK_MAP_LARGE) == 0) {
+		if (prof_promote == false) {
+			arena_run_t *run = (arena_run_t *)((uintptr_t)chunk +
+			    (uintptr_t)((pageind - (mapbits >> LG_PAGE)) <<
+			    LG_PAGE));
+			size_t binind;
+			arena_bin_info_t *bin_info;
+			unsigned regind;
+
+			binind = arena_ptr_small_binind_get(ptr, mapbits);
+			bin_info = &arena_bin_info[binind];
+			regind = arena_run_regind(run, bin_info, ptr);
+
+			*((prof_ctx_t **)((uintptr_t)run + bin_info->ctx0_offset
+			    + (regind * sizeof(prof_ctx_t *)))) = ctx;
+		} else
+			assert((uintptr_t)ctx == (uintptr_t)1U);
+	} else
+		arena_mapp_get(chunk, pageind)->prof_ctx = ctx;
+}
+
+JEMALLOC_INLINE void *
+arena_malloc(arena_t *arena, size_t size, bool zero, bool try_tcache)
+{
+	tcache_t *tcache;
+
+	assert(size != 0);
+	assert(size <= arena_maxclass);
+
+	if (size <= SMALL_MAXCLASS) {
+		if (try_tcache && (tcache = tcache_get(true)) != NULL)
+			return (tcache_alloc_small(tcache, size, zero));
+		else {
+			return (arena_malloc_small(choose_arena(arena), size,
+			    zero));
+		}
+	} else {
+		/*
+		 * Initialize tcache after checking size in order to avoid
+		 * infinite recursion during tcache initialization.
+		 */
+		if (try_tcache && size <= tcache_maxclass && (tcache =
+		    tcache_get(true)) != NULL)
+			return (tcache_alloc_large(tcache, size, zero));
+		else {
+			return (arena_malloc_large(choose_arena(arena), size,
+			    zero));
+		}
+	}
+}
+
+/* Return the size of the allocation pointed to by ptr. */
+JEMALLOC_INLINE size_t
+arena_salloc(const void *ptr, bool demote)
+{
+	size_t ret;
+	arena_chunk_t *chunk;
+	size_t pageind, binind;
+
+	assert(ptr != NULL);
+	assert(CHUNK_ADDR2BASE(ptr) != ptr);
+
+	chunk = (arena_chunk_t *)CHUNK_ADDR2BASE(ptr);
+	pageind = ((uintptr_t)ptr - (uintptr_t)chunk) >> LG_PAGE;
+	assert(arena_mapbits_allocated_get(chunk, pageind) != 0);
+	binind = arena_mapbits_binind_get(chunk, pageind);
+	if (binind == BININD_INVALID || (config_prof && demote == false &&
+	    prof_promote && arena_mapbits_large_get(chunk, pageind) != 0)) {
+		/*
+		 * Large allocation.  In the common case (demote == true), and
+		 * as this is an inline function, most callers will only end up
+		 * looking at binind to determine that ptr is a small
+		 * allocation.
+		 */
+		assert(((uintptr_t)ptr & PAGE_MASK) == 0);
+		ret = arena_mapbits_large_size_get(chunk, pageind);
+		assert(ret != 0);
+		assert(pageind + (ret>>LG_PAGE) <= chunk_npages);
+		assert(ret == PAGE || arena_mapbits_large_size_get(chunk,
+		    pageind+(ret>>LG_PAGE)-1) == 0);
+		assert(binind == arena_mapbits_binind_get(chunk,
+		    pageind+(ret>>LG_PAGE)-1));
+		assert(arena_mapbits_dirty_get(chunk, pageind) ==
+		    arena_mapbits_dirty_get(chunk, pageind+(ret>>LG_PAGE)-1));
+	} else {
+		/*
+		 * Small allocation (possibly promoted to a large object due to
+		 * prof_promote).
+		 */
+		assert(arena_mapbits_large_get(chunk, pageind) != 0 ||
+		    arena_ptr_small_binind_get(ptr, arena_mapbits_get(chunk,
+		    pageind)) == binind);
+		ret = arena_bin_info[binind].reg_size;
+	}
+
+	return (ret);
+}
+
+JEMALLOC_INLINE void
+arena_dalloc(arena_t *arena, arena_chunk_t *chunk, void *ptr, bool try_tcache)
+{
+	size_t pageind, mapbits;
+	tcache_t *tcache;
+
+	assert(arena != NULL);
+	assert(chunk->arena == arena);
+	assert(ptr != NULL);
+	assert(CHUNK_ADDR2BASE(ptr) != ptr);
+
+	pageind = ((uintptr_t)ptr - (uintptr_t)chunk) >> LG_PAGE;
+	mapbits = arena_mapbits_get(chunk, pageind);
+	assert(arena_mapbits_allocated_get(chunk, pageind) != 0);
+	if ((mapbits & CHUNK_MAP_LARGE) == 0) {
+		/* Small allocation. */
+		if (try_tcache && (tcache = tcache_get(false)) != NULL) {
+			size_t binind;
+
+			binind = arena_ptr_small_binind_get(ptr, mapbits);
+			tcache_dalloc_small(tcache, ptr, binind);
+		} else
+			arena_dalloc_small(arena, chunk, ptr, pageind);
+	} else {
+		size_t size = arena_mapbits_large_size_get(chunk, pageind);
+
+		assert(((uintptr_t)ptr & PAGE_MASK) == 0);
+
+		if (try_tcache && size <= tcache_maxclass && (tcache =
+		    tcache_get(false)) != NULL) {
+			tcache_dalloc_large(tcache, ptr, size);
+		} else
+			arena_dalloc_large(arena, chunk, ptr);
+	}
+}
+#  endif /* JEMALLOC_ARENA_INLINE_B */
+#endif
+
+#endif /* JEMALLOC_H_INLINES */
+/******************************************************************************/

deps/jemalloc/include/jemalloc/internal/arena_externs.h

@@ -1,94 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ARENA_EXTERNS_H
-#define JEMALLOC_INTERNAL_ARENA_EXTERNS_H
-
-#include "jemalloc/internal/bin.h"
-#include "jemalloc/internal/extent_dss.h"
-#include "jemalloc/internal/pages.h"
-#include "jemalloc/internal/size_classes.h"
-#include "jemalloc/internal/stats.h"
-
-extern ssize_t opt_dirty_decay_ms;
-extern ssize_t opt_muzzy_decay_ms;
-
-extern percpu_arena_mode_t opt_percpu_arena;
-extern const char *percpu_arena_mode_names[];
-
-extern const uint64_t h_steps[SMOOTHSTEP_NSTEPS];
-extern malloc_mutex_t arenas_lock;
-
-void arena_basic_stats_merge(tsdn_t *tsdn, arena_t *arena,
-    unsigned *nthreads, const char **dss, ssize_t *dirty_decay_ms,
-    ssize_t *muzzy_decay_ms, size_t *nactive, size_t *ndirty, size_t *nmuzzy);
-void arena_stats_merge(tsdn_t *tsdn, arena_t *arena, unsigned *nthreads,
-    const char **dss, ssize_t *dirty_decay_ms, ssize_t *muzzy_decay_ms,
-    size_t *nactive, size_t *ndirty, size_t *nmuzzy, arena_stats_t *astats,
-    bin_stats_t *bstats, arena_stats_large_t *lstats);
-void arena_extents_dirty_dalloc(tsdn_t *tsdn, arena_t *arena,
-    extent_hooks_t **r_extent_hooks, extent_t *extent);
-#ifdef JEMALLOC_JET
-size_t arena_slab_regind(extent_t *slab, szind_t binind, const void *ptr);
-#endif
-extent_t *arena_extent_alloc_large(tsdn_t *tsdn, arena_t *arena,
-    size_t usize, size_t alignment, bool *zero);
-void arena_extent_dalloc_large_prep(tsdn_t *tsdn, arena_t *arena,
-    extent_t *extent);
-void arena_extent_ralloc_large_shrink(tsdn_t *tsdn, arena_t *arena,
-    extent_t *extent, size_t oldsize);
-void arena_extent_ralloc_large_expand(tsdn_t *tsdn, arena_t *arena,
-    extent_t *extent, size_t oldsize);
-ssize_t arena_dirty_decay_ms_get(arena_t *arena);
-bool arena_dirty_decay_ms_set(tsdn_t *tsdn, arena_t *arena, ssize_t decay_ms);
-ssize_t arena_muzzy_decay_ms_get(arena_t *arena);
-bool arena_muzzy_decay_ms_set(tsdn_t *tsdn, arena_t *arena, ssize_t decay_ms);
-void arena_decay(tsdn_t *tsdn, arena_t *arena, bool is_background_thread,
-    bool all);
-void arena_reset(tsd_t *tsd, arena_t *arena);
-void arena_destroy(tsd_t *tsd, arena_t *arena);
-void arena_tcache_fill_small(tsdn_t *tsdn, arena_t *arena, tcache_t *tcache,
-    cache_bin_t *tbin, szind_t binind, uint64_t prof_accumbytes);
-void arena_alloc_junk_small(void *ptr, const bin_info_t *bin_info,
-    bool zero);
-
-typedef void (arena_dalloc_junk_small_t)(void *, const bin_info_t *);
-extern arena_dalloc_junk_small_t *JET_MUTABLE arena_dalloc_junk_small;
-
-void *arena_malloc_hard(tsdn_t *tsdn, arena_t *arena, size_t size,
-    szind_t ind, bool zero);
-void *arena_palloc(tsdn_t *tsdn, arena_t *arena, size_t usize,
-    size_t alignment, bool zero, tcache_t *tcache);
-void arena_prof_promote(tsdn_t *tsdn, const void *ptr, size_t usize);
-void arena_dalloc_promoted(tsdn_t *tsdn, void *ptr, tcache_t *tcache,
-    bool slow_path);
-void arena_dalloc_bin_junked_locked(tsdn_t *tsdn, arena_t *arena,
-    extent_t *extent, void *ptr);
-void arena_dalloc_small(tsdn_t *tsdn, void *ptr);
-bool arena_ralloc_no_move(tsdn_t *tsdn, void *ptr, size_t oldsize, size_t size,
-    size_t extra, bool zero);
-void *arena_ralloc(tsdn_t *tsdn, arena_t *arena, void *ptr, size_t oldsize,
-    size_t size, size_t alignment, bool zero, tcache_t *tcache);
-dss_prec_t arena_dss_prec_get(arena_t *arena);
-bool arena_dss_prec_set(arena_t *arena, dss_prec_t dss_prec);
-ssize_t arena_dirty_decay_ms_default_get(void);
-bool arena_dirty_decay_ms_default_set(ssize_t decay_ms);
-ssize_t arena_muzzy_decay_ms_default_get(void);
-bool arena_muzzy_decay_ms_default_set(ssize_t decay_ms);
-bool arena_retain_grow_limit_get_set(tsd_t *tsd, arena_t *arena,
-    size_t *old_limit, size_t *new_limit);
-unsigned arena_nthreads_get(arena_t *arena, bool internal);
-void arena_nthreads_inc(arena_t *arena, bool internal);
-void arena_nthreads_dec(arena_t *arena, bool internal);
-size_t arena_extent_sn_next(arena_t *arena);
-arena_t *arena_new(tsdn_t *tsdn, unsigned ind, extent_hooks_t *extent_hooks);
-void arena_boot(void);
-void arena_prefork0(tsdn_t *tsdn, arena_t *arena);
-void arena_prefork1(tsdn_t *tsdn, arena_t *arena);
-void arena_prefork2(tsdn_t *tsdn, arena_t *arena);
-void arena_prefork3(tsdn_t *tsdn, arena_t *arena);
-void arena_prefork4(tsdn_t *tsdn, arena_t *arena);
-void arena_prefork5(tsdn_t *tsdn, arena_t *arena);
-void arena_prefork6(tsdn_t *tsdn, arena_t *arena);
-void arena_prefork7(tsdn_t *tsdn, arena_t *arena);
-void arena_postfork_parent(tsdn_t *tsdn, arena_t *arena);
-void arena_postfork_child(tsdn_t *tsdn, arena_t *arena);
-
-#endif /* JEMALLOC_INTERNAL_ARENA_EXTERNS_H */

deps/jemalloc/include/jemalloc/internal/arena_inlines_a.h

@@ -1,57 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ARENA_INLINES_A_H
-#define JEMALLOC_INTERNAL_ARENA_INLINES_A_H
-
-static inline unsigned
-arena_ind_get(const arena_t *arena) {
-	return base_ind_get(arena->base);
-}
-
-static inline void
-arena_internal_add(arena_t *arena, size_t size) {
-	atomic_fetch_add_zu(&arena->stats.internal, size, ATOMIC_RELAXED);
-}
-
-static inline void
-arena_internal_sub(arena_t *arena, size_t size) {
-	atomic_fetch_sub_zu(&arena->stats.internal, size, ATOMIC_RELAXED);
-}
-
-static inline size_t
-arena_internal_get(arena_t *arena) {
-	return atomic_load_zu(&arena->stats.internal, ATOMIC_RELAXED);
-}
-
-static inline bool
-arena_prof_accum(tsdn_t *tsdn, arena_t *arena, uint64_t accumbytes) {
-	cassert(config_prof);
-
-	if (likely(prof_interval == 0 || !prof_active_get_unlocked())) {
-		return false;
-	}
-
-	return prof_accum_add(tsdn, &arena->prof_accum, accumbytes);
-}
-
-static inline void
-percpu_arena_update(tsd_t *tsd, unsigned cpu) {
-	assert(have_percpu_arena);
-	arena_t *oldarena = tsd_arena_get(tsd);
-	assert(oldarena != NULL);
-	unsigned oldind = arena_ind_get(oldarena);
-
-	if (oldind != cpu) {
-		unsigned newind = cpu;
-		arena_t *newarena = arena_get(tsd_tsdn(tsd), newind, true);
-		assert(newarena != NULL);
-
-		/* Set new arena/tcache associations. */
-		arena_migrate(tsd, oldind, newind);
-		tcache_t *tcache = tcache_get(tsd);
-		if (tcache != NULL) {
-			tcache_arena_reassociate(tsd_tsdn(tsd), tcache,
-			    newarena);
-		}
-	}
-}
-
-#endif /* JEMALLOC_INTERNAL_ARENA_INLINES_A_H */

deps/jemalloc/include/jemalloc/internal/arena_inlines_b.h

@@ -1,354 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ARENA_INLINES_B_H
-#define JEMALLOC_INTERNAL_ARENA_INLINES_B_H
-
-#include "jemalloc/internal/jemalloc_internal_types.h"
-#include "jemalloc/internal/mutex.h"
-#include "jemalloc/internal/rtree.h"
-#include "jemalloc/internal/size_classes.h"
-#include "jemalloc/internal/sz.h"
-#include "jemalloc/internal/ticker.h"
-
-JEMALLOC_ALWAYS_INLINE prof_tctx_t *
-arena_prof_tctx_get(tsdn_t *tsdn, const void *ptr, alloc_ctx_t *alloc_ctx) {
-	cassert(config_prof);
-	assert(ptr != NULL);
-
-	/* Static check. */
-	if (alloc_ctx == NULL) {
-		const extent_t *extent = iealloc(tsdn, ptr);
-		if (unlikely(!extent_slab_get(extent))) {
-			return large_prof_tctx_get(tsdn, extent);
-		}
-	} else {
-		if (unlikely(!alloc_ctx->slab)) {
-			return large_prof_tctx_get(tsdn, iealloc(tsdn, ptr));
-		}
-	}
-	return (prof_tctx_t *)(uintptr_t)1U;
-}
-
-JEMALLOC_ALWAYS_INLINE void
-arena_prof_tctx_set(tsdn_t *tsdn, const void *ptr, UNUSED size_t usize,
-    alloc_ctx_t *alloc_ctx, prof_tctx_t *tctx) {
-	cassert(config_prof);
-	assert(ptr != NULL);
-
-	/* Static check. */
-	if (alloc_ctx == NULL) {
-		extent_t *extent = iealloc(tsdn, ptr);
-		if (unlikely(!extent_slab_get(extent))) {
-			large_prof_tctx_set(tsdn, extent, tctx);
-		}
-	} else {
-		if (unlikely(!alloc_ctx->slab)) {
-			large_prof_tctx_set(tsdn, iealloc(tsdn, ptr), tctx);
-		}
-	}
-}
-
-static inline void
-arena_prof_tctx_reset(tsdn_t *tsdn, const void *ptr, UNUSED prof_tctx_t *tctx) {
-	cassert(config_prof);
-	assert(ptr != NULL);
-
-	extent_t *extent = iealloc(tsdn, ptr);
-	assert(!extent_slab_get(extent));
-
-	large_prof_tctx_reset(tsdn, extent);
-}
-
-JEMALLOC_ALWAYS_INLINE void
-arena_decay_ticks(tsdn_t *tsdn, arena_t *arena, unsigned nticks) {
-	tsd_t *tsd;
-	ticker_t *decay_ticker;
-
-	if (unlikely(tsdn_null(tsdn))) {
-		return;
-	}
-	tsd = tsdn_tsd(tsdn);
-	decay_ticker = decay_ticker_get(tsd, arena_ind_get(arena));
-	if (unlikely(decay_ticker == NULL)) {
-		return;
-	}
-	if (unlikely(ticker_ticks(decay_ticker, nticks))) {
-		arena_decay(tsdn, arena, false, false);
-	}
-}
-
-JEMALLOC_ALWAYS_INLINE void
-arena_decay_tick(tsdn_t *tsdn, arena_t *arena) {
-	malloc_mutex_assert_not_owner(tsdn, &arena->decay_dirty.mtx);
-	malloc_mutex_assert_not_owner(tsdn, &arena->decay_muzzy.mtx);
-
-	arena_decay_ticks(tsdn, arena, 1);
-}
-
-JEMALLOC_ALWAYS_INLINE void *
-arena_malloc(tsdn_t *tsdn, arena_t *arena, size_t size, szind_t ind, bool zero,
-    tcache_t *tcache, bool slow_path) {
-	assert(!tsdn_null(tsdn) || tcache == NULL);
-	assert(size != 0);
-
-	if (likely(tcache != NULL)) {
-		if (likely(size <= SMALL_MAXCLASS)) {
-			return tcache_alloc_small(tsdn_tsd(tsdn), arena,
-			    tcache, size, ind, zero, slow_path);
-		}
-		if (likely(size <= tcache_maxclass)) {
-			return tcache_alloc_large(tsdn_tsd(tsdn), arena,
-			    tcache, size, ind, zero, slow_path);
-		}
-		/* (size > tcache_maxclass) case falls through. */
-		assert(size > tcache_maxclass);
-	}
-
-	return arena_malloc_hard(tsdn, arena, size, ind, zero);
-}
-
-JEMALLOC_ALWAYS_INLINE arena_t *
-arena_aalloc(tsdn_t *tsdn, const void *ptr) {
-	return extent_arena_get(iealloc(tsdn, ptr));
-}
-
-JEMALLOC_ALWAYS_INLINE size_t
-arena_salloc(tsdn_t *tsdn, const void *ptr) {
-	assert(ptr != NULL);
-
-	rtree_ctx_t rtree_ctx_fallback;
-	rtree_ctx_t *rtree_ctx = tsdn_rtree_ctx(tsdn, &rtree_ctx_fallback);
-
-	szind_t szind = rtree_szind_read(tsdn, &extents_rtree, rtree_ctx,
-	    (uintptr_t)ptr, true);
-	assert(szind != NSIZES);
-
-	return sz_index2size(szind);
-}
-
-JEMALLOC_ALWAYS_INLINE size_t
-arena_vsalloc(tsdn_t *tsdn, const void *ptr) {
-	/*
-	 * Return 0 if ptr is not within an extent managed by jemalloc.  This
-	 * function has two extra costs relative to isalloc():
-	 * - The rtree calls cannot claim to be dependent lookups, which induces
-	 *   rtree lookup load dependencies.
-	 * - The lookup may fail, so there is an extra branch to check for
-	 *   failure.
-	 */
-
-	rtree_ctx_t rtree_ctx_fallback;
-	rtree_ctx_t *rtree_ctx = tsdn_rtree_ctx(tsdn, &rtree_ctx_fallback);
-
-	extent_t *extent;
-	szind_t szind;
-	if (rtree_extent_szind_read(tsdn, &extents_rtree, rtree_ctx,
-	    (uintptr_t)ptr, false, &extent, &szind)) {
-		return 0;
-	}
-
-	if (extent == NULL) {
-		return 0;
-	}
-	assert(extent_state_get(extent) == extent_state_active);
-	/* Only slab members should be looked up via interior pointers. */
-	assert(extent_addr_get(extent) == ptr || extent_slab_get(extent));
-
-	assert(szind != NSIZES);
-
-	return sz_index2size(szind);
-}
-
-static inline void
-arena_dalloc_no_tcache(tsdn_t *tsdn, void *ptr) {
-	assert(ptr != NULL);
-
-	rtree_ctx_t rtree_ctx_fallback;
-	rtree_ctx_t *rtree_ctx = tsdn_rtree_ctx(tsdn, &rtree_ctx_fallback);
-
-	szind_t szind;
-	bool slab;
-	rtree_szind_slab_read(tsdn, &extents_rtree, rtree_ctx, (uintptr_t)ptr,
-	    true, &szind, &slab);
-
-	if (config_debug) {
-		extent_t *extent = rtree_extent_read(tsdn, &extents_rtree,
-		    rtree_ctx, (uintptr_t)ptr, true);
-		assert(szind == extent_szind_get(extent));
-		assert(szind < NSIZES);
-		assert(slab == extent_slab_get(extent));
-	}
-
-	if (likely(slab)) {
-		/* Small allocation. */
-		arena_dalloc_small(tsdn, ptr);
-	} else {
-		extent_t *extent = iealloc(tsdn, ptr);
-		large_dalloc(tsdn, extent);
-	}
-}
-
-JEMALLOC_ALWAYS_INLINE void
-arena_dalloc(tsdn_t *tsdn, void *ptr, tcache_t *tcache,
-    alloc_ctx_t *alloc_ctx, bool slow_path) {
-	assert(!tsdn_null(tsdn) || tcache == NULL);
-	assert(ptr != NULL);
-
-	if (unlikely(tcache == NULL)) {
-		arena_dalloc_no_tcache(tsdn, ptr);
-		return;
-	}
-
-	szind_t szind;
-	bool slab;
-	rtree_ctx_t *rtree_ctx;
-	if (alloc_ctx != NULL) {
-		szind = alloc_ctx->szind;
-		slab = alloc_ctx->slab;
-		assert(szind != NSIZES);
-	} else {
-		rtree_ctx = tsd_rtree_ctx(tsdn_tsd(tsdn));
-		rtree_szind_slab_read(tsdn, &extents_rtree, rtree_ctx,
-		    (uintptr_t)ptr, true, &szind, &slab);
-	}
-
-	if (config_debug) {
-		rtree_ctx = tsd_rtree_ctx(tsdn_tsd(tsdn));
-		extent_t *extent = rtree_extent_read(tsdn, &extents_rtree,
-		    rtree_ctx, (uintptr_t)ptr, true);
-		assert(szind == extent_szind_get(extent));
-		assert(szind < NSIZES);
-		assert(slab == extent_slab_get(extent));
-	}
-
-	if (likely(slab)) {
-		/* Small allocation. */
-		tcache_dalloc_small(tsdn_tsd(tsdn), tcache, ptr, szind,
-		    slow_path);
-	} else {
-		if (szind < nhbins) {
-			if (config_prof && unlikely(szind < NBINS)) {
-				arena_dalloc_promoted(tsdn, ptr, tcache,
-				    slow_path);
-			} else {
-				tcache_dalloc_large(tsdn_tsd(tsdn), tcache, ptr,
-				    szind, slow_path);
-			}
-		} else {
-			extent_t *extent = iealloc(tsdn, ptr);
-			large_dalloc(tsdn, extent);
-		}
-	}
-}
-
-static inline void
-arena_sdalloc_no_tcache(tsdn_t *tsdn, void *ptr, size_t size) {
-	assert(ptr != NULL);
-	assert(size <= LARGE_MAXCLASS);
-
-	szind_t szind;
-	bool slab;
-	if (!config_prof || !opt_prof) {
-		/*
-		 * There is no risk of being confused by a promoted sampled
-		 * object, so base szind and slab on the given size.
-		 */
-		szind = sz_size2index(size);
-		slab = (szind < NBINS);
-	}
-
-	if ((config_prof && opt_prof) || config_debug) {
-		rtree_ctx_t rtree_ctx_fallback;
-		rtree_ctx_t *rtree_ctx = tsdn_rtree_ctx(tsdn,
-		    &rtree_ctx_fallback);
-
-		rtree_szind_slab_read(tsdn, &extents_rtree, rtree_ctx,
-		    (uintptr_t)ptr, true, &szind, &slab);
-
-		assert(szind == sz_size2index(size));
-		assert((config_prof && opt_prof) || slab == (szind < NBINS));
-
-		if (config_debug) {
-			extent_t *extent = rtree_extent_read(tsdn,
-			    &extents_rtree, rtree_ctx, (uintptr_t)ptr, true);
-			assert(szind == extent_szind_get(extent));
-			assert(slab == extent_slab_get(extent));
-		}
-	}
-
-	if (likely(slab)) {
-		/* Small allocation. */
-		arena_dalloc_small(tsdn, ptr);
-	} else {
-		extent_t *extent = iealloc(tsdn, ptr);
-		large_dalloc(tsdn, extent);
-	}
-}
-
-JEMALLOC_ALWAYS_INLINE void
-arena_sdalloc(tsdn_t *tsdn, void *ptr, size_t size, tcache_t *tcache,
-    alloc_ctx_t *alloc_ctx, bool slow_path) {
-	assert(!tsdn_null(tsdn) || tcache == NULL);
-	assert(ptr != NULL);
-	assert(size <= LARGE_MAXCLASS);
-
-	if (unlikely(tcache == NULL)) {
-		arena_sdalloc_no_tcache(tsdn, ptr, size);
-		return;
-	}
-
-	szind_t szind;
-	bool slab;
-	UNUSED alloc_ctx_t local_ctx;
-	if (config_prof && opt_prof) {
-		if (alloc_ctx == NULL) {
-			/* Uncommon case and should be a static check. */
-			rtree_ctx_t rtree_ctx_fallback;
-			rtree_ctx_t *rtree_ctx = tsdn_rtree_ctx(tsdn,
-			    &rtree_ctx_fallback);
-			rtree_szind_slab_read(tsdn, &extents_rtree, rtree_ctx,
-			    (uintptr_t)ptr, true, &local_ctx.szind,
-			    &local_ctx.slab);
-			assert(local_ctx.szind == sz_size2index(size));
-			alloc_ctx = &local_ctx;
-		}
-		slab = alloc_ctx->slab;
-		szind = alloc_ctx->szind;
-	} else {
-		/*
-		 * There is no risk of being confused by a promoted sampled
-		 * object, so base szind and slab on the given size.
-		 */
-		szind = sz_size2index(size);
-		slab = (szind < NBINS);
-	}
-
-	if (config_debug) {
-		rtree_ctx_t *rtree_ctx = tsd_rtree_ctx(tsdn_tsd(tsdn));
-		rtree_szind_slab_read(tsdn, &extents_rtree, rtree_ctx,
-		    (uintptr_t)ptr, true, &szind, &slab);
-		extent_t *extent = rtree_extent_read(tsdn,
-		    &extents_rtree, rtree_ctx, (uintptr_t)ptr, true);
-		assert(szind == extent_szind_get(extent));
-		assert(slab == extent_slab_get(extent));
-	}
-
-	if (likely(slab)) {
-		/* Small allocation. */
-		tcache_dalloc_small(tsdn_tsd(tsdn), tcache, ptr, szind,
-		    slow_path);
-	} else {
-		if (szind < nhbins) {
-			if (config_prof && unlikely(szind < NBINS)) {
-				arena_dalloc_promoted(tsdn, ptr, tcache,
-				    slow_path);
-			} else {
-				tcache_dalloc_large(tsdn_tsd(tsdn),
-				    tcache, ptr, szind, slow_path);
-			}
-		} else {
-			extent_t *extent = iealloc(tsdn, ptr);
-			large_dalloc(tsdn, extent);
-		}
-	}
-}
-
-#endif /* JEMALLOC_INTERNAL_ARENA_INLINES_B_H */

deps/jemalloc/include/jemalloc/internal/arena_stats.h

@@ -1,237 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ARENA_STATS_H
-#define JEMALLOC_INTERNAL_ARENA_STATS_H
-
-#include "jemalloc/internal/atomic.h"
-#include "jemalloc/internal/mutex.h"
-#include "jemalloc/internal/mutex_prof.h"
-#include "jemalloc/internal/size_classes.h"
-
-/*
- * In those architectures that support 64-bit atomics, we use atomic updates for
- * our 64-bit values.  Otherwise, we use a plain uint64_t and synchronize
- * externally.
- */
-#ifdef JEMALLOC_ATOMIC_U64
-typedef atomic_u64_t arena_stats_u64_t;
-#else
-/* Must hold the arena stats mutex while reading atomically. */
-typedef uint64_t arena_stats_u64_t;
-#endif
-
-typedef struct arena_stats_large_s arena_stats_large_t;
-struct arena_stats_large_s {
-	/*
-	 * Total number of allocation/deallocation requests served directly by
-	 * the arena.
-	 */
-	arena_stats_u64_t	nmalloc;
-	arena_stats_u64_t	ndalloc;
-
-	/*
-	 * Number of allocation requests that correspond to this size class.
-	 * This includes requests served by tcache, though tcache only
-	 * periodically merges into this counter.
-	 */
-	arena_stats_u64_t	nrequests; /* Partially derived. */
-
-	/* Current number of allocations of this size class. */
-	size_t		curlextents; /* Derived. */
-};
-
-typedef struct arena_stats_decay_s arena_stats_decay_t;
-struct arena_stats_decay_s {
-	/* Total number of purge sweeps. */
-	arena_stats_u64_t	npurge;
-	/* Total number of madvise calls made. */
-	arena_stats_u64_t	nmadvise;
-	/* Total number of pages purged. */
-	arena_stats_u64_t	purged;
-};
-
-/*
- * Arena stats.  Note that fields marked "derived" are not directly maintained
- * within the arena code; rather their values are derived during stats merge
- * requests.
- */
-typedef struct arena_stats_s arena_stats_t;
-struct arena_stats_s {
-#ifndef JEMALLOC_ATOMIC_U64
-	malloc_mutex_t		mtx;
-#endif
-
-	/* Number of bytes currently mapped, excluding retained memory. */
-	atomic_zu_t		mapped; /* Partially derived. */
-
-	/*
-	 * Number of unused virtual memory bytes currently retained.  Retained
-	 * bytes are technically mapped (though always decommitted or purged),
-	 * but they are excluded from the mapped statistic (above).
-	 */
-	atomic_zu_t		retained; /* Derived. */
-
-	arena_stats_decay_t	decay_dirty;
-	arena_stats_decay_t	decay_muzzy;
-
-	atomic_zu_t		base; /* Derived. */
-	atomic_zu_t		internal;
-	atomic_zu_t		resident; /* Derived. */
-	atomic_zu_t		metadata_thp;
-
-	atomic_zu_t		allocated_large; /* Derived. */
-	arena_stats_u64_t	nmalloc_large; /* Derived. */
-	arena_stats_u64_t	ndalloc_large; /* Derived. */
-	arena_stats_u64_t	nrequests_large; /* Derived. */
-
-	/* Number of bytes cached in tcache associated with this arena. */
-	atomic_zu_t		tcache_bytes; /* Derived. */
-
-	mutex_prof_data_t mutex_prof_data[mutex_prof_num_arena_mutexes];
-
-	/* One element for each large size class. */
-	arena_stats_large_t	lstats[NSIZES - NBINS];
-
-	/* Arena uptime. */
-	nstime_t		uptime;
-};
-
-static inline bool
-arena_stats_init(UNUSED tsdn_t *tsdn, arena_stats_t *arena_stats) {
-	if (config_debug) {
-		for (size_t i = 0; i < sizeof(arena_stats_t); i++) {
-			assert(((char *)arena_stats)[i] == 0);
-		}
-	}
-#ifndef JEMALLOC_ATOMIC_U64
-	if (malloc_mutex_init(&arena_stats->mtx, "arena_stats",
-	    WITNESS_RANK_ARENA_STATS, malloc_mutex_rank_exclusive)) {
-		return true;
-	}
-#endif
-	/* Memory is zeroed, so there is no need to clear stats. */
-	return false;
-}
-
-static inline void
-arena_stats_lock(tsdn_t *tsdn, arena_stats_t *arena_stats) {
-#ifndef JEMALLOC_ATOMIC_U64
-	malloc_mutex_lock(tsdn, &arena_stats->mtx);
-#endif
-}
-
-static inline void
-arena_stats_unlock(tsdn_t *tsdn, arena_stats_t *arena_stats) {
-#ifndef JEMALLOC_ATOMIC_U64
-	malloc_mutex_unlock(tsdn, &arena_stats->mtx);
-#endif
-}
-
-static inline uint64_t
-arena_stats_read_u64(tsdn_t *tsdn, arena_stats_t *arena_stats,
-    arena_stats_u64_t *p) {
-#ifdef JEMALLOC_ATOMIC_U64
-	return atomic_load_u64(p, ATOMIC_RELAXED);
-#else
-	malloc_mutex_assert_owner(tsdn, &arena_stats->mtx);
-	return *p;
-#endif
-}
-
-static inline void
-arena_stats_add_u64(tsdn_t *tsdn, arena_stats_t *arena_stats,
-    arena_stats_u64_t *p, uint64_t x) {
-#ifdef JEMALLOC_ATOMIC_U64
-	atomic_fetch_add_u64(p, x, ATOMIC_RELAXED);
-#else
-	malloc_mutex_assert_owner(tsdn, &arena_stats->mtx);
-	*p += x;
-#endif
-}
-
-UNUSED static inline void
-arena_stats_sub_u64(tsdn_t *tsdn, arena_stats_t *arena_stats,
-    arena_stats_u64_t *p, uint64_t x) {
-#ifdef JEMALLOC_ATOMIC_U64
-	UNUSED uint64_t r = atomic_fetch_sub_u64(p, x, ATOMIC_RELAXED);
-	assert(r - x <= r);
-#else
-	malloc_mutex_assert_owner(tsdn, &arena_stats->mtx);
-	*p -= x;
-	assert(*p + x >= *p);
-#endif
-}
-
-/*
- * Non-atomically sets *dst += src.  *dst needs external synchronization.
- * This lets us avoid the cost of a fetch_add when its unnecessary (note that
- * the types here are atomic).
- */
-static inline void
-arena_stats_accum_u64(arena_stats_u64_t *dst, uint64_t src) {
-#ifdef JEMALLOC_ATOMIC_U64
-	uint64_t cur_dst = atomic_load_u64(dst, ATOMIC_RELAXED);
-	atomic_store_u64(dst, src + cur_dst, ATOMIC_RELAXED);
-#else
-	*dst += src;
-#endif
-}
-
-static inline size_t
-arena_stats_read_zu(tsdn_t *tsdn, arena_stats_t *arena_stats, atomic_zu_t *p) {
-#ifdef JEMALLOC_ATOMIC_U64
-	return atomic_load_zu(p, ATOMIC_RELAXED);
-#else
-	malloc_mutex_assert_owner(tsdn, &arena_stats->mtx);
-	return atomic_load_zu(p, ATOMIC_RELAXED);
-#endif
-}
-
-static inline void
-arena_stats_add_zu(tsdn_t *tsdn, arena_stats_t *arena_stats, atomic_zu_t *p,
-    size_t x) {
-#ifdef JEMALLOC_ATOMIC_U64
-	atomic_fetch_add_zu(p, x, ATOMIC_RELAXED);
-#else
-	malloc_mutex_assert_owner(tsdn, &arena_stats->mtx);
-	size_t cur = atomic_load_zu(p, ATOMIC_RELAXED);
-	atomic_store_zu(p, cur + x, ATOMIC_RELAXED);
-#endif
-}
-
-static inline void
-arena_stats_sub_zu(tsdn_t *tsdn, arena_stats_t *arena_stats, atomic_zu_t *p,
-    size_t x) {
-#ifdef JEMALLOC_ATOMIC_U64
-	UNUSED size_t r = atomic_fetch_sub_zu(p, x, ATOMIC_RELAXED);
-	assert(r - x <= r);
-#else
-	malloc_mutex_assert_owner(tsdn, &arena_stats->mtx);
-	size_t cur = atomic_load_zu(p, ATOMIC_RELAXED);
-	atomic_store_zu(p, cur - x, ATOMIC_RELAXED);
-#endif
-}
-
-/* Like the _u64 variant, needs an externally synchronized *dst. */
-static inline void
-arena_stats_accum_zu(atomic_zu_t *dst, size_t src) {
-	size_t cur_dst = atomic_load_zu(dst, ATOMIC_RELAXED);
-	atomic_store_zu(dst, src + cur_dst, ATOMIC_RELAXED);
-}
-
-static inline void
-arena_stats_large_nrequests_add(tsdn_t *tsdn, arena_stats_t *arena_stats,
-    szind_t szind, uint64_t nrequests) {
-	arena_stats_lock(tsdn, arena_stats);
-	arena_stats_add_u64(tsdn, arena_stats, &arena_stats->lstats[szind -
-	    NBINS].nrequests, nrequests);
-	arena_stats_unlock(tsdn, arena_stats);
-}
-
-static inline void
-arena_stats_mapped_add(tsdn_t *tsdn, arena_stats_t *arena_stats, size_t size) {
-	arena_stats_lock(tsdn, arena_stats);
-	arena_stats_add_zu(tsdn, arena_stats, &arena_stats->mapped, size);
-	arena_stats_unlock(tsdn, arena_stats);
-}
-
-
-#endif /* JEMALLOC_INTERNAL_ARENA_STATS_H */

deps/jemalloc/include/jemalloc/internal/arena_structs_a.h

@@ -1,11 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ARENA_STRUCTS_A_H
-#define JEMALLOC_INTERNAL_ARENA_STRUCTS_A_H
-
-#include "jemalloc/internal/bitmap.h"
-
-struct arena_slab_data_s {
-	/* Per region allocated/deallocated bitmap. */
-	bitmap_t	bitmap[BITMAP_GROUPS_MAX];
-};
-
-#endif /* JEMALLOC_INTERNAL_ARENA_STRUCTS_A_H */

deps/jemalloc/include/jemalloc/internal/arena_structs_b.h

@@ -1,229 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ARENA_STRUCTS_B_H
-#define JEMALLOC_INTERNAL_ARENA_STRUCTS_B_H
-
-#include "jemalloc/internal/arena_stats.h"
-#include "jemalloc/internal/atomic.h"
-#include "jemalloc/internal/bin.h"
-#include "jemalloc/internal/bitmap.h"
-#include "jemalloc/internal/extent_dss.h"
-#include "jemalloc/internal/jemalloc_internal_types.h"
-#include "jemalloc/internal/mutex.h"
-#include "jemalloc/internal/nstime.h"
-#include "jemalloc/internal/ql.h"
-#include "jemalloc/internal/size_classes.h"
-#include "jemalloc/internal/smoothstep.h"
-#include "jemalloc/internal/ticker.h"
-
-struct arena_decay_s {
-	/* Synchronizes all non-atomic fields. */
-	malloc_mutex_t		mtx;
-	/*
-	 * True if a thread is currently purging the extents associated with
-	 * this decay structure.
-	 */
-	bool			purging;
-	/*
-	 * Approximate time in milliseconds from the creation of a set of unused
-	 * dirty pages until an equivalent set of unused dirty pages is purged
-	 * and/or reused.
-	 */
-	atomic_zd_t		time_ms;
-	/* time / SMOOTHSTEP_NSTEPS. */
-	nstime_t		interval;
-	/*
-	 * Time at which the current decay interval logically started.  We do
-	 * not actually advance to a new epoch until sometime after it starts
-	 * because of scheduling and computation delays, and it is even possible
-	 * to completely skip epochs.  In all cases, during epoch advancement we
-	 * merge all relevant activity into the most recently recorded epoch.
-	 */
-	nstime_t		epoch;
-	/* Deadline randomness generator. */
-	uint64_t		jitter_state;
-	/*
-	 * Deadline for current epoch.  This is the sum of interval and per
-	 * epoch jitter which is a uniform random variable in [0..interval).
-	 * Epochs always advance by precise multiples of interval, but we
-	 * randomize the deadline to reduce the likelihood of arenas purging in
-	 * lockstep.
-	 */
-	nstime_t		deadline;
-	/*
-	 * Number of unpurged pages at beginning of current epoch.  During epoch
-	 * advancement we use the delta between arena->decay_*.nunpurged and
-	 * extents_npages_get(&arena->extents_*) to determine how many dirty
-	 * pages, if any, were generated.
-	 */
-	size_t			nunpurged;
-	/*
-	 * Trailing log of how many unused dirty pages were generated during
-	 * each of the past SMOOTHSTEP_NSTEPS decay epochs, where the last
-	 * element is the most recent epoch.  Corresponding epoch times are
-	 * relative to epoch.
-	 */
-	size_t			backlog[SMOOTHSTEP_NSTEPS];
-
-	/*
-	 * Pointer to associated stats.  These stats are embedded directly in
-	 * the arena's stats due to how stats structures are shared between the
-	 * arena and ctl code.
-	 *
-	 * Synchronization: Same as associated arena's stats field. */
-	arena_stats_decay_t	*stats;
-	/* Peak number of pages in associated extents.  Used for debug only. */
-	uint64_t		ceil_npages;
-};
-
-struct arena_s {
-	/*
-	 * Number of threads currently assigned to this arena.  Each thread has
-	 * two distinct assignments, one for application-serving allocation, and
-	 * the other for internal metadata allocation.  Internal metadata must
-	 * not be allocated from arenas explicitly created via the arenas.create
-	 * mallctl, because the arena.<i>.reset mallctl indiscriminately
-	 * discards all allocations for the affected arena.
-	 *
-	 *   0: Application allocation.
-	 *   1: Internal metadata allocation.
-	 *
-	 * Synchronization: atomic.
-	 */
-	atomic_u_t		nthreads[2];
-
-	/*
-	 * When percpu_arena is enabled, to amortize the cost of reading /
-	 * updating the current CPU id, track the most recent thread accessing
-	 * this arena, and only read CPU if there is a mismatch.
-	 */
-	tsdn_t		*last_thd;
-
-	/* Synchronization: internal. */
-	arena_stats_t		stats;
-
-	/*
-	 * Lists of tcaches and cache_bin_array_descriptors for extant threads
-	 * associated with this arena.  Stats from these are merged
-	 * incrementally, and at exit if opt_stats_print is enabled.
-	 *
-	 * Synchronization: tcache_ql_mtx.
-	 */
-	ql_head(tcache_t)			tcache_ql;
-	ql_head(cache_bin_array_descriptor_t)	cache_bin_array_descriptor_ql;
-	malloc_mutex_t				tcache_ql_mtx;
-
-	/* Synchronization: internal. */
-	prof_accum_t		prof_accum;
-	uint64_t		prof_accumbytes;
-
-	/*
-	 * PRNG state for cache index randomization of large allocation base
-	 * pointers.
-	 *
-	 * Synchronization: atomic.
-	 */
-	atomic_zu_t		offset_state;
-
-	/*
-	 * Extent serial number generator state.
-	 *
-	 * Synchronization: atomic.
-	 */
-	atomic_zu_t		extent_sn_next;
-
-	/*
-	 * Represents a dss_prec_t, but atomically.
-	 *
-	 * Synchronization: atomic.
-	 */
-	atomic_u_t		dss_prec;
-
-	/*
-	 * Number of pages in active extents.
-	 *
-	 * Synchronization: atomic.
-	 */
-	atomic_zu_t		nactive;
-
-	/*
-	 * Extant large allocations.
-	 *
-	 * Synchronization: large_mtx.
-	 */
-	extent_list_t		large;
-	/* Synchronizes all large allocation/update/deallocation. */
-	malloc_mutex_t		large_mtx;
-
-	/*
-	 * Collections of extents that were previously allocated.  These are
-	 * used when allocating extents, in an attempt to re-use address space.
-	 *
-	 * Synchronization: internal.
-	 */
-	extents_t		extents_dirty;
-	extents_t		extents_muzzy;
-	extents_t		extents_retained;
-
-	/*
-	 * Decay-based purging state, responsible for scheduling extent state
-	 * transitions.
-	 *
-	 * Synchronization: internal.
-	 */
-	arena_decay_t		decay_dirty; /* dirty --> muzzy */
-	arena_decay_t		decay_muzzy; /* muzzy --> retained */
-
-	/*
-	 * Next extent size class in a growing series to use when satisfying a
-	 * request via the extent hooks (only if opt_retain).  This limits the
-	 * number of disjoint virtual memory ranges so that extent merging can
-	 * be effective even if multiple arenas' extent allocation requests are
-	 * highly interleaved.
-	 *
-	 * retain_grow_limit is the max allowed size ind to expand (unless the
-	 * required size is greater).  Default is no limit, and controlled
-	 * through mallctl only.
-	 *
-	 * Synchronization: extent_grow_mtx
-	 */
-	pszind_t		extent_grow_next;
-	pszind_t		retain_grow_limit;
-	malloc_mutex_t		extent_grow_mtx;
-
-	/*
-	 * Available extent structures that were allocated via
-	 * base_alloc_extent().
-	 *
-	 * Synchronization: extent_avail_mtx.
-	 */
-	extent_tree_t		extent_avail;
-	malloc_mutex_t		extent_avail_mtx;
-
-	/*
-	 * bins is used to store heaps of free regions.
-	 *
-	 * Synchronization: internal.
-	 */
-	bin_t			bins[NBINS];
-
-	/*
-	 * Base allocator, from which arena metadata are allocated.
-	 *
-	 * Synchronization: internal.
-	 */
-	base_t			*base;
-	/* Used to determine uptime.  Read-only after initialization. */
-	nstime_t		create_time;
-};
-
-/* Used in conjunction with tsd for fast arena-related context lookup. */
-struct arena_tdata_s {
-	ticker_t		decay_ticker;
-};
-
-/* Used to pass rtree lookup context down the path. */
-struct alloc_ctx_s {
-	szind_t szind;
-	bool slab;
-};
-
-#endif /* JEMALLOC_INTERNAL_ARENA_STRUCTS_B_H */

deps/jemalloc/include/jemalloc/internal/arena_types.h

@@ -1,43 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ARENA_TYPES_H
-#define JEMALLOC_INTERNAL_ARENA_TYPES_H
-
-/* Maximum number of regions in one slab. */
-#define LG_SLAB_MAXREGS		(LG_PAGE - LG_TINY_MIN)
-#define SLAB_MAXREGS		(1U << LG_SLAB_MAXREGS)
-
-/* Default decay times in milliseconds. */
-#define DIRTY_DECAY_MS_DEFAULT	ZD(10 * 1000)
-#define MUZZY_DECAY_MS_DEFAULT	ZD(10 * 1000)
-/* Number of event ticks between time checks. */
-#define DECAY_NTICKS_PER_UPDATE	1000
-
-typedef struct arena_slab_data_s arena_slab_data_t;
-typedef struct arena_decay_s arena_decay_t;
-typedef struct arena_s arena_t;
-typedef struct arena_tdata_s arena_tdata_t;
-typedef struct alloc_ctx_s alloc_ctx_t;
-
-typedef enum {
-	percpu_arena_mode_names_base   = 0, /* Used for options processing. */
-
-	/*
-	 * *_uninit are used only during bootstrapping, and must correspond
-	 * to initialized variant plus percpu_arena_mode_enabled_base.
-	 */
-	percpu_arena_uninit            = 0,
-	per_phycpu_arena_uninit        = 1,
-
-	/* All non-disabled modes must come after percpu_arena_disabled. */
-	percpu_arena_disabled          = 2,
-
-	percpu_arena_mode_names_limit  = 3, /* Used for options processing. */
-	percpu_arena_mode_enabled_base = 3,
-
-	percpu_arena                   = 3,
-	per_phycpu_arena               = 4  /* Hyper threads share arena. */
-} percpu_arena_mode_t;
-
-#define PERCPU_ARENA_ENABLED(m)	((m) >= percpu_arena_mode_enabled_base)
-#define PERCPU_ARENA_DEFAULT	percpu_arena_disabled
-
-#endif /* JEMALLOC_INTERNAL_ARENA_TYPES_H */

deps/jemalloc/include/jemalloc/internal/assert.h

@@ -1,56 +0,0 @@
-#include "jemalloc/internal/malloc_io.h"
-#include "jemalloc/internal/util.h"
-
-/*
- * Define a custom assert() in order to reduce the chances of deadlock during
- * assertion failure.
- */
-#ifndef assert
-#define assert(e) do {							\
-	if (unlikely(config_debug && !(e))) {				\
-		malloc_printf(						\
-		    "<jemalloc>: %s:%d: Failed assertion: \"%s\"\n",	\
-		    __FILE__, __LINE__, #e);				\
-		abort();						\
-	}								\
-} while (0)
-#endif
-
-#ifndef not_reached
-#define not_reached() do {						\
-	if (config_debug) {						\
-		malloc_printf(						\
-		    "<jemalloc>: %s:%d: Unreachable code reached\n",	\
-		    __FILE__, __LINE__);				\
-		abort();						\
-	}								\
-	unreachable();							\
-} while (0)
-#endif
-
-#ifndef not_implemented
-#define not_implemented() do {						\
-	if (config_debug) {						\
-		malloc_printf("<jemalloc>: %s:%d: Not implemented\n",	\
-		    __FILE__, __LINE__);				\
-		abort();						\
-	}								\
-} while (0)
-#endif
-
-#ifndef assert_not_implemented
-#define assert_not_implemented(e) do {					\
-	if (unlikely(config_debug && !(e))) {				\
-		not_implemented();					\
-	}								\
-} while (0)
-#endif
-
-/* Use to assert a particular configuration, e.g., cassert(config_debug). */
-#ifndef cassert
-#define cassert(c) do {							\
-	if (unlikely(!(c))) {						\
-		not_reached();						\
-	}								\
-} while (0)
-#endif

deps/jemalloc/include/jemalloc/internal/atomic.h

@@ -1,77 +1,304 @@
-#ifndef JEMALLOC_INTERNAL_ATOMIC_H
-#define JEMALLOC_INTERNAL_ATOMIC_H
+/******************************************************************************/
+#ifdef JEMALLOC_H_TYPES
 
-#define ATOMIC_INLINE static inline
+#endif /* JEMALLOC_H_TYPES */
+/******************************************************************************/
+#ifdef JEMALLOC_H_STRUCTS
 
-#if defined(JEMALLOC_GCC_ATOMIC_ATOMICS)
-#  include "jemalloc/internal/atomic_gcc_atomic.h"
-#elif defined(JEMALLOC_GCC_SYNC_ATOMICS)
-#  include "jemalloc/internal/atomic_gcc_sync.h"
-#elif defined(_MSC_VER)
-#  include "jemalloc/internal/atomic_msvc.h"
-#elif defined(JEMALLOC_C11_ATOMICS)
-#  include "jemalloc/internal/atomic_c11.h"
-#else
-#  error "Don't have atomics implemented on this platform."
+#endif /* JEMALLOC_H_STRUCTS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_EXTERNS
+
+#define	atomic_read_uint64(p)	atomic_add_uint64(p, 0)
+#define	atomic_read_uint32(p)	atomic_add_uint32(p, 0)
+#define	atomic_read_z(p)	atomic_add_z(p, 0)
+#define	atomic_read_u(p)	atomic_add_u(p, 0)
+
+#endif /* JEMALLOC_H_EXTERNS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_INLINES
+
+#ifndef JEMALLOC_ENABLE_INLINE
+uint64_t	atomic_add_uint64(uint64_t *p, uint64_t x);
+uint64_t	atomic_sub_uint64(uint64_t *p, uint64_t x);
+uint32_t	atomic_add_uint32(uint32_t *p, uint32_t x);
+uint32_t	atomic_sub_uint32(uint32_t *p, uint32_t x);
+size_t	atomic_add_z(size_t *p, size_t x);
+size_t	atomic_sub_z(size_t *p, size_t x);
+unsigned	atomic_add_u(unsigned *p, unsigned x);
+unsigned	atomic_sub_u(unsigned *p, unsigned x);
 #endif
 
-/*
- * This header gives more or less a backport of C11 atomics. The user can write
- * JEMALLOC_GENERATE_ATOMICS(type, short_type, lg_sizeof_type); to generate
- * counterparts of the C11 atomic functions for type, as so:
- *   JEMALLOC_GENERATE_ATOMICS(int *, pi, 3);
- * and then write things like:
- *   int *some_ptr;
- *   atomic_pi_t atomic_ptr_to_int;
- *   atomic_store_pi(&atomic_ptr_to_int, some_ptr, ATOMIC_RELAXED);
- *   int *prev_value = atomic_exchange_pi(&ptr_to_int, NULL, ATOMIC_ACQ_REL);
- *   assert(some_ptr == prev_value);
- * and expect things to work in the obvious way.
- *
- * Also included (with naming differences to avoid conflicts with the standard
- * library):
- *   atomic_fence(atomic_memory_order_t) (mimics C11's atomic_thread_fence).
- *   ATOMIC_INIT (mimics C11's ATOMIC_VAR_INIT).
- */
-
-/*
- * Pure convenience, so that we don't have to type "atomic_memory_order_"
- * quite so often.
- */
-#define ATOMIC_RELAXED atomic_memory_order_relaxed
-#define ATOMIC_ACQUIRE atomic_memory_order_acquire
-#define ATOMIC_RELEASE atomic_memory_order_release
-#define ATOMIC_ACQ_REL atomic_memory_order_acq_rel
-#define ATOMIC_SEQ_CST atomic_memory_order_seq_cst
-
-/*
- * Not all platforms have 64-bit atomics.  If we do, this #define exposes that
- * fact.
- */
+#if (defined(JEMALLOC_ENABLE_INLINE) || defined(JEMALLOC_ATOMIC_C_))
+/******************************************************************************/
+/* 64-bit operations. */
 #if (LG_SIZEOF_PTR == 3 || LG_SIZEOF_INT == 3)
-#  define JEMALLOC_ATOMIC_U64
+#  ifdef __GCC_HAVE_SYNC_COMPARE_AND_SWAP_8
+JEMALLOC_INLINE uint64_t
+atomic_add_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (__sync_add_and_fetch(p, x));
+}
+
+JEMALLOC_INLINE uint64_t
+atomic_sub_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (__sync_sub_and_fetch(p, x));
+}
+#elif (defined(_MSC_VER))
+JEMALLOC_INLINE uint64_t
+atomic_add_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (InterlockedExchangeAdd64(p, x));
+}
+
+JEMALLOC_INLINE uint64_t
+atomic_sub_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (InterlockedExchangeAdd64(p, -((int64_t)x)));
+}
+#elif (defined(JEMALLOC_OSATOMIC))
+JEMALLOC_INLINE uint64_t
+atomic_add_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (OSAtomicAdd64((int64_t)x, (int64_t *)p));
+}
+
+JEMALLOC_INLINE uint64_t
+atomic_sub_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (OSAtomicAdd64(-((int64_t)x), (int64_t *)p));
+}
+#  elif (defined(__amd64__) || defined(__x86_64__))
+JEMALLOC_INLINE uint64_t
+atomic_add_uint64(uint64_t *p, uint64_t x)
+{
+
+	asm volatile (
+	    "lock; xaddq %0, %1;"
+	    : "+r" (x), "=m" (*p) /* Outputs. */
+	    : "m" (*p) /* Inputs. */
+	    );
+
+	return (x);
+}
+
+JEMALLOC_INLINE uint64_t
+atomic_sub_uint64(uint64_t *p, uint64_t x)
+{
+
+	x = (uint64_t)(-(int64_t)x);
+	asm volatile (
+	    "lock; xaddq %0, %1;"
+	    : "+r" (x), "=m" (*p) /* Outputs. */
+	    : "m" (*p) /* Inputs. */
+	    );
+
+	return (x);
+}
+#  elif (defined(JEMALLOC_ATOMIC9))
+JEMALLOC_INLINE uint64_t
+atomic_add_uint64(uint64_t *p, uint64_t x)
+{
+
+	/*
+	 * atomic_fetchadd_64() doesn't exist, but we only ever use this
+	 * function on LP64 systems, so atomic_fetchadd_long() will do.
+	 */
+	assert(sizeof(uint64_t) == sizeof(unsigned long));
+
+	return (atomic_fetchadd_long(p, (unsigned long)x) + x);
+}
+
+JEMALLOC_INLINE uint64_t
+atomic_sub_uint64(uint64_t *p, uint64_t x)
+{
+
+	assert(sizeof(uint64_t) == sizeof(unsigned long));
+
+	return (atomic_fetchadd_long(p, (unsigned long)(-(long)x)) - x);
+}
+#  elif (defined(JE_FORCE_SYNC_COMPARE_AND_SWAP_8))
+JEMALLOC_INLINE uint64_t
+atomic_add_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (__sync_add_and_fetch(p, x));
+}
+
+JEMALLOC_INLINE uint64_t
+atomic_sub_uint64(uint64_t *p, uint64_t x)
+{
+
+	return (__sync_sub_and_fetch(p, x));
+}
+#  else
+#    error "Missing implementation for 64-bit atomic operations"
+#  endif
 #endif
 
-JEMALLOC_GENERATE_ATOMICS(void *, p, LG_SIZEOF_PTR)
+/******************************************************************************/
+/* 32-bit operations. */
+#ifdef __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4
+JEMALLOC_INLINE uint32_t
+atomic_add_uint32(uint32_t *p, uint32_t x)
+{
 
-/*
- * There's no actual guarantee that sizeof(bool) == 1, but it's true on the only
- * platform that actually needs to know the size, MSVC.
- */
-JEMALLOC_GENERATE_ATOMICS(bool, b, 0)
+	return (__sync_add_and_fetch(p, x));
+}
 
-JEMALLOC_GENERATE_INT_ATOMICS(unsigned, u, LG_SIZEOF_INT)
+JEMALLOC_INLINE uint32_t
+atomic_sub_uint32(uint32_t *p, uint32_t x)
+{
 
-JEMALLOC_GENERATE_INT_ATOMICS(size_t, zu, LG_SIZEOF_PTR)
+	return (__sync_sub_and_fetch(p, x));
+}
+#elif (defined(_MSC_VER))
+JEMALLOC_INLINE uint32_t
+atomic_add_uint32(uint32_t *p, uint32_t x)
+{
 
-JEMALLOC_GENERATE_INT_ATOMICS(ssize_t, zd, LG_SIZEOF_PTR)
+	return (InterlockedExchangeAdd(p, x));
+}
 
-JEMALLOC_GENERATE_INT_ATOMICS(uint32_t, u32, 2)
+JEMALLOC_INLINE uint32_t
+atomic_sub_uint32(uint32_t *p, uint32_t x)
+{
 
-#ifdef JEMALLOC_ATOMIC_U64
-JEMALLOC_GENERATE_INT_ATOMICS(uint64_t, u64, 3)
+	return (InterlockedExchangeAdd(p, -((int32_t)x)));
+}
+#elif (defined(JEMALLOC_OSATOMIC))
+JEMALLOC_INLINE uint32_t
+atomic_add_uint32(uint32_t *p, uint32_t x)
+{
+
+	return (OSAtomicAdd32((int32_t)x, (int32_t *)p));
+}
+
+JEMALLOC_INLINE uint32_t
+atomic_sub_uint32(uint32_t *p, uint32_t x)
+{
+
+	return (OSAtomicAdd32(-((int32_t)x), (int32_t *)p));
+}
+#elif (defined(__i386__) || defined(__amd64__) || defined(__x86_64__))
+JEMALLOC_INLINE uint32_t
+atomic_add_uint32(uint32_t *p, uint32_t x)
+{
+
+	asm volatile (
+	    "lock; xaddl %0, %1;"
+	    : "+r" (x), "=m" (*p) /* Outputs. */
+	    : "m" (*p) /* Inputs. */
+	    );
+
+	return (x);
+}
+
+JEMALLOC_INLINE uint32_t
+atomic_sub_uint32(uint32_t *p, uint32_t x)
+{
+
+	x = (uint32_t)(-(int32_t)x);
+	asm volatile (
+	    "lock; xaddl %0, %1;"
+	    : "+r" (x), "=m" (*p) /* Outputs. */
+	    : "m" (*p) /* Inputs. */
+	    );
+
+	return (x);
+}
+#elif (defined(JEMALLOC_ATOMIC9))
+JEMALLOC_INLINE uint32_t
+atomic_add_uint32(uint32_t *p, uint32_t x)
+{
+
+	return (atomic_fetchadd_32(p, x) + x);
+}
+
+JEMALLOC_INLINE uint32_t
+atomic_sub_uint32(uint32_t *p, uint32_t x)
+{
+
+	return (atomic_fetchadd_32(p, (uint32_t)(-(int32_t)x)) - x);
+}
+#elif (defined(JE_FORCE_SYNC_COMPARE_AND_SWAP_4))
+JEMALLOC_INLINE uint32_t
+atomic_add_uint32(uint32_t *p, uint32_t x)
+{
+
+	return (__sync_add_and_fetch(p, x));
+}
+
+JEMALLOC_INLINE uint32_t
+atomic_sub_uint32(uint32_t *p, uint32_t x)
+{
+
+	return (__sync_sub_and_fetch(p, x));
+}
+#else
+#  error "Missing implementation for 32-bit atomic operations"
 #endif
 
-#undef ATOMIC_INLINE
+/******************************************************************************/
+/* size_t operations. */
+JEMALLOC_INLINE size_t
+atomic_add_z(size_t *p, size_t x)
+{
 
-#endif /* JEMALLOC_INTERNAL_ATOMIC_H */
+#if (LG_SIZEOF_PTR == 3)
+	return ((size_t)atomic_add_uint64((uint64_t *)p, (uint64_t)x));
+#elif (LG_SIZEOF_PTR == 2)
+	return ((size_t)atomic_add_uint32((uint32_t *)p, (uint32_t)x));
+#endif
+}
+
+JEMALLOC_INLINE size_t
+atomic_sub_z(size_t *p, size_t x)
+{
+
+#if (LG_SIZEOF_PTR == 3)
+	return ((size_t)atomic_add_uint64((uint64_t *)p,
+	    (uint64_t)-((int64_t)x)));
+#elif (LG_SIZEOF_PTR == 2)
+	return ((size_t)atomic_add_uint32((uint32_t *)p,
+	    (uint32_t)-((int32_t)x)));
+#endif
+}
+
+/******************************************************************************/
+/* unsigned operations. */
+JEMALLOC_INLINE unsigned
+atomic_add_u(unsigned *p, unsigned x)
+{
+
+#if (LG_SIZEOF_INT == 3)
+	return ((unsigned)atomic_add_uint64((uint64_t *)p, (uint64_t)x));
+#elif (LG_SIZEOF_INT == 2)
+	return ((unsigned)atomic_add_uint32((uint32_t *)p, (uint32_t)x));
+#endif
+}
+
+JEMALLOC_INLINE unsigned
+atomic_sub_u(unsigned *p, unsigned x)
+{
+
+#if (LG_SIZEOF_INT == 3)
+	return ((unsigned)atomic_add_uint64((uint64_t *)p,
+	    (uint64_t)-((int64_t)x)));
+#elif (LG_SIZEOF_INT == 2)
+	return ((unsigned)atomic_add_uint32((uint32_t *)p,
+	    (uint32_t)-((int32_t)x)));
+#endif
+}
+/******************************************************************************/
+#endif
+
+#endif /* JEMALLOC_H_INLINES */
+/******************************************************************************/

deps/jemalloc/include/jemalloc/internal/atomic_c11.h

@@ -1,97 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ATOMIC_C11_H
-#define JEMALLOC_INTERNAL_ATOMIC_C11_H
-
-#include <stdatomic.h>
-
-#define ATOMIC_INIT(...) ATOMIC_VAR_INIT(__VA_ARGS__)
-
-#define atomic_memory_order_t memory_order
-#define atomic_memory_order_relaxed memory_order_relaxed
-#define atomic_memory_order_acquire memory_order_acquire
-#define atomic_memory_order_release memory_order_release
-#define atomic_memory_order_acq_rel memory_order_acq_rel
-#define atomic_memory_order_seq_cst memory_order_seq_cst
-
-#define atomic_fence atomic_thread_fence
-
-#define JEMALLOC_GENERATE_ATOMICS(type, short_type,			\
-    /* unused */ lg_size)						\
-typedef _Atomic(type) atomic_##short_type##_t;				\
-									\
-ATOMIC_INLINE type							\
-atomic_load_##short_type(const atomic_##short_type##_t *a,		\
-    atomic_memory_order_t mo) {						\
-	/*								\
-	 * A strict interpretation of the C standard prevents		\
-	 * atomic_load from taking a const argument, but it's		\
-	 * convenient for our purposes. This cast is a workaround.	\
-	 */								\
-	atomic_##short_type##_t* a_nonconst =				\
-	    (atomic_##short_type##_t*)a;				\
-	return atomic_load_explicit(a_nonconst, mo);			\
-}									\
-									\
-ATOMIC_INLINE void							\
-atomic_store_##short_type(atomic_##short_type##_t *a,			\
-    type val, atomic_memory_order_t mo) {				\
-	atomic_store_explicit(a, val, mo);				\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_exchange_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return atomic_exchange_explicit(a, val, mo);			\
-}									\
-									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_weak_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	return atomic_compare_exchange_weak_explicit(a, expected,	\
-	    desired, success_mo, failure_mo);				\
-}									\
-									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_strong_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	return atomic_compare_exchange_strong_explicit(a, expected,	\
-	    desired, success_mo, failure_mo);				\
-}
-
-/*
- * Integral types have some special operations available that non-integral ones
- * lack.
- */
-#define JEMALLOC_GENERATE_INT_ATOMICS(type, short_type, 		\
-    /* unused */ lg_size)						\
-JEMALLOC_GENERATE_ATOMICS(type, short_type, /* unused */ lg_size)	\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_add_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return atomic_fetch_add_explicit(a, val, mo);			\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_sub_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return atomic_fetch_sub_explicit(a, val, mo);			\
-}									\
-ATOMIC_INLINE type							\
-atomic_fetch_and_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return atomic_fetch_and_explicit(a, val, mo);			\
-}									\
-ATOMIC_INLINE type							\
-atomic_fetch_or_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return atomic_fetch_or_explicit(a, val, mo);			\
-}									\
-ATOMIC_INLINE type							\
-atomic_fetch_xor_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return atomic_fetch_xor_explicit(a, val, mo);			\
-}
-
-#endif /* JEMALLOC_INTERNAL_ATOMIC_C11_H */

deps/jemalloc/include/jemalloc/internal/atomic_gcc_atomic.h

@@ -1,127 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ATOMIC_GCC_ATOMIC_H
-#define JEMALLOC_INTERNAL_ATOMIC_GCC_ATOMIC_H
-
-#include "jemalloc/internal/assert.h"
-
-#define ATOMIC_INIT(...) {__VA_ARGS__}
-
-typedef enum {
-	atomic_memory_order_relaxed,
-	atomic_memory_order_acquire,
-	atomic_memory_order_release,
-	atomic_memory_order_acq_rel,
-	atomic_memory_order_seq_cst
-} atomic_memory_order_t;
-
-ATOMIC_INLINE int
-atomic_enum_to_builtin(atomic_memory_order_t mo) {
-	switch (mo) {
-	case atomic_memory_order_relaxed:
-		return __ATOMIC_RELAXED;
-	case atomic_memory_order_acquire:
-		return __ATOMIC_ACQUIRE;
-	case atomic_memory_order_release:
-		return __ATOMIC_RELEASE;
-	case atomic_memory_order_acq_rel:
-		return __ATOMIC_ACQ_REL;
-	case atomic_memory_order_seq_cst:
-		return __ATOMIC_SEQ_CST;
-	}
-	/* Can't happen; the switch is exhaustive. */
-	not_reached();
-}
-
-ATOMIC_INLINE void
-atomic_fence(atomic_memory_order_t mo) {
-	__atomic_thread_fence(atomic_enum_to_builtin(mo));
-}
-
-#define JEMALLOC_GENERATE_ATOMICS(type, short_type,			\
-    /* unused */ lg_size)						\
-typedef struct {							\
-	type repr;							\
-} atomic_##short_type##_t;						\
-									\
-ATOMIC_INLINE type							\
-atomic_load_##short_type(const atomic_##short_type##_t *a,		\
-    atomic_memory_order_t mo) {						\
-	type result;							\
-	__atomic_load(&a->repr, &result, atomic_enum_to_builtin(mo));	\
-	return result;							\
-}									\
-									\
-ATOMIC_INLINE void							\
-atomic_store_##short_type(atomic_##short_type##_t *a, type val,		\
-    atomic_memory_order_t mo) {						\
-	__atomic_store(&a->repr, &val, atomic_enum_to_builtin(mo));	\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_exchange_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	type result;							\
-	__atomic_exchange(&a->repr, &val, &result,			\
-	    atomic_enum_to_builtin(mo));				\
-	return result;							\
-}									\
-									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_weak_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	return __atomic_compare_exchange(&a->repr, expected, &desired,	\
-	    true, atomic_enum_to_builtin(success_mo),			\
-	    atomic_enum_to_builtin(failure_mo));			\
-}									\
-									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_strong_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	return __atomic_compare_exchange(&a->repr, expected, &desired,	\
-	    false,							\
-	    atomic_enum_to_builtin(success_mo),				\
-	    atomic_enum_to_builtin(failure_mo));			\
-}
-
-
-#define JEMALLOC_GENERATE_INT_ATOMICS(type, short_type,			\
-    /* unused */ lg_size)						\
-JEMALLOC_GENERATE_ATOMICS(type, short_type, /* unused */ lg_size)	\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_add_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __atomic_fetch_add(&a->repr, val,			\
-	    atomic_enum_to_builtin(mo));				\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_sub_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __atomic_fetch_sub(&a->repr, val,			\
-	    atomic_enum_to_builtin(mo));				\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_and_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __atomic_fetch_and(&a->repr, val,			\
-	    atomic_enum_to_builtin(mo));				\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_or_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __atomic_fetch_or(&a->repr, val,				\
-	    atomic_enum_to_builtin(mo));				\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_xor_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __atomic_fetch_xor(&a->repr, val,			\
-	    atomic_enum_to_builtin(mo));				\
-}
-
-#endif /* JEMALLOC_INTERNAL_ATOMIC_GCC_ATOMIC_H */

deps/jemalloc/include/jemalloc/internal/atomic_gcc_sync.h

@@ -1,191 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ATOMIC_GCC_SYNC_H
-#define JEMALLOC_INTERNAL_ATOMIC_GCC_SYNC_H
-
-#define ATOMIC_INIT(...) {__VA_ARGS__}
-
-typedef enum {
-	atomic_memory_order_relaxed,
-	atomic_memory_order_acquire,
-	atomic_memory_order_release,
-	atomic_memory_order_acq_rel,
-	atomic_memory_order_seq_cst
-} atomic_memory_order_t;
-
-ATOMIC_INLINE void
-atomic_fence(atomic_memory_order_t mo) {
-	/* Easy cases first: no barrier, and full barrier. */
-	if (mo == atomic_memory_order_relaxed) {
-		asm volatile("" ::: "memory");
-		return;
-	}
-	if (mo == atomic_memory_order_seq_cst) {
-		asm volatile("" ::: "memory");
-		__sync_synchronize();
-		asm volatile("" ::: "memory");
-		return;
-	}
-	asm volatile("" ::: "memory");
-#  if defined(__i386__) || defined(__x86_64__)
-	/* This is implicit on x86. */
-#  elif defined(__ppc__)
-	asm volatile("lwsync");
-#  elif defined(__sparc__) && defined(__arch64__)
-	if (mo == atomic_memory_order_acquire) {
-		asm volatile("membar #LoadLoad | #LoadStore");
-	} else if (mo == atomic_memory_order_release) {
-		asm volatile("membar #LoadStore | #StoreStore");
-	} else {
-		asm volatile("membar #LoadLoad | #LoadStore | #StoreStore");
-	}
-#  else
-	__sync_synchronize();
-#  endif
-	asm volatile("" ::: "memory");
-}
-
-/*
- * A correct implementation of seq_cst loads and stores on weakly ordered
- * architectures could do either of the following:
- *   1. store() is weak-fence -> store -> strong fence, load() is load ->
- *      strong-fence.
- *   2. store() is strong-fence -> store, load() is strong-fence -> load ->
- *      weak-fence.
- * The tricky thing is, load() and store() above can be the load or store
- * portions of a gcc __sync builtin, so we have to follow GCC's lead, which
- * means going with strategy 2.
- * On strongly ordered architectures, the natural strategy is to stick a strong
- * fence after seq_cst stores, and have naked loads.  So we want the strong
- * fences in different places on different architectures.
- * atomic_pre_sc_load_fence and atomic_post_sc_store_fence allow us to
- * accomplish this.
- */
-
-ATOMIC_INLINE void
-atomic_pre_sc_load_fence() {
-#  if defined(__i386__) || defined(__x86_64__) ||			\
-    (defined(__sparc__) && defined(__arch64__))
-	atomic_fence(atomic_memory_order_relaxed);
-#  else
-	atomic_fence(atomic_memory_order_seq_cst);
-#  endif
-}
-
-ATOMIC_INLINE void
-atomic_post_sc_store_fence() {
-#  if defined(__i386__) || defined(__x86_64__) ||			\
-    (defined(__sparc__) && defined(__arch64__))
-	atomic_fence(atomic_memory_order_seq_cst);
-#  else
-	atomic_fence(atomic_memory_order_relaxed);
-#  endif
-
-}
-
-#define JEMALLOC_GENERATE_ATOMICS(type, short_type,			\
-    /* unused */ lg_size)						\
-typedef struct {							\
-	type volatile repr;						\
-} atomic_##short_type##_t;						\
-									\
-ATOMIC_INLINE type							\
-atomic_load_##short_type(const atomic_##short_type##_t *a,		\
-    atomic_memory_order_t mo) {						\
-	if (mo == atomic_memory_order_seq_cst) {			\
-		atomic_pre_sc_load_fence();				\
-	}								\
-	type result = a->repr;						\
-	if (mo != atomic_memory_order_relaxed) {			\
-		atomic_fence(atomic_memory_order_acquire);		\
-	}								\
-	return result;							\
-}									\
-									\
-ATOMIC_INLINE void							\
-atomic_store_##short_type(atomic_##short_type##_t *a,			\
-    type val, atomic_memory_order_t mo) {				\
-	if (mo != atomic_memory_order_relaxed) {			\
-		atomic_fence(atomic_memory_order_release);		\
-	}								\
-	a->repr = val;							\
-	if (mo == atomic_memory_order_seq_cst) {			\
-		atomic_post_sc_store_fence();				\
-	}								\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_exchange_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	/*								\
-	 * Because of FreeBSD, we care about gcc 4.2, which doesn't have\
-	 * an atomic exchange builtin.  We fake it with a CAS loop.	\
-	 */								\
-	while (true) {							\
-		type old = a->repr;					\
-		if (__sync_bool_compare_and_swap(&a->repr, old, val)) {	\
-			return old;					\
-		}							\
-	}								\
-}									\
-									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_weak_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	type prev = __sync_val_compare_and_swap(&a->repr, *expected,	\
-	    desired);							\
-	if (prev == *expected) {					\
-		return true;						\
-	} else {							\
-		*expected = prev;					\
-		return false;						\
-	}								\
-}									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_strong_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	type prev = __sync_val_compare_and_swap(&a->repr, *expected,	\
-	    desired);							\
-	if (prev == *expected) {					\
-		return true;						\
-	} else {							\
-		*expected = prev;					\
-		return false;						\
-	}								\
-}
-
-#define JEMALLOC_GENERATE_INT_ATOMICS(type, short_type,			\
-    /* unused */ lg_size)						\
-JEMALLOC_GENERATE_ATOMICS(type, short_type, /* unused */ lg_size)	\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_add_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __sync_fetch_and_add(&a->repr, val);			\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_sub_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __sync_fetch_and_sub(&a->repr, val);			\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_and_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __sync_fetch_and_and(&a->repr, val);			\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_or_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __sync_fetch_and_or(&a->repr, val);			\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_xor_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return __sync_fetch_and_xor(&a->repr, val);			\
-}
-
-#endif /* JEMALLOC_INTERNAL_ATOMIC_GCC_SYNC_H */

deps/jemalloc/include/jemalloc/internal/atomic_msvc.h

@@ -1,158 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_ATOMIC_MSVC_H
-#define JEMALLOC_INTERNAL_ATOMIC_MSVC_H
-
-#define ATOMIC_INIT(...) {__VA_ARGS__}
-
-typedef enum {
-	atomic_memory_order_relaxed,
-	atomic_memory_order_acquire,
-	atomic_memory_order_release,
-	atomic_memory_order_acq_rel,
-	atomic_memory_order_seq_cst
-} atomic_memory_order_t;
-
-typedef char atomic_repr_0_t;
-typedef short atomic_repr_1_t;
-typedef long atomic_repr_2_t;
-typedef __int64 atomic_repr_3_t;
-
-ATOMIC_INLINE void
-atomic_fence(atomic_memory_order_t mo) {
-	_ReadWriteBarrier();
-#  if defined(_M_ARM) || defined(_M_ARM64)
-	/* ARM needs a barrier for everything but relaxed. */
-	if (mo != atomic_memory_order_relaxed) {
-		MemoryBarrier();
-	}
-#  elif defined(_M_IX86) || defined (_M_X64)
-	/* x86 needs a barrier only for seq_cst. */
-	if (mo == atomic_memory_order_seq_cst) {
-		MemoryBarrier();
-	}
-#  else
-#  error "Don't know how to create atomics for this platform for MSVC."
-#  endif
-	_ReadWriteBarrier();
-}
-
-#define ATOMIC_INTERLOCKED_REPR(lg_size) atomic_repr_ ## lg_size ## _t
-
-#define ATOMIC_CONCAT(a, b) ATOMIC_RAW_CONCAT(a, b)
-#define ATOMIC_RAW_CONCAT(a, b) a ## b
-
-#define ATOMIC_INTERLOCKED_NAME(base_name, lg_size) ATOMIC_CONCAT(	\
-    base_name, ATOMIC_INTERLOCKED_SUFFIX(lg_size))
-
-#define ATOMIC_INTERLOCKED_SUFFIX(lg_size)				\
-    ATOMIC_CONCAT(ATOMIC_INTERLOCKED_SUFFIX_, lg_size)
-
-#define ATOMIC_INTERLOCKED_SUFFIX_0 8
-#define ATOMIC_INTERLOCKED_SUFFIX_1 16
-#define ATOMIC_INTERLOCKED_SUFFIX_2
-#define ATOMIC_INTERLOCKED_SUFFIX_3 64
-
-#define JEMALLOC_GENERATE_ATOMICS(type, short_type, lg_size)		\
-typedef struct {							\
-	ATOMIC_INTERLOCKED_REPR(lg_size) repr;				\
-} atomic_##short_type##_t;						\
-									\
-ATOMIC_INLINE type							\
-atomic_load_##short_type(const atomic_##short_type##_t *a,		\
-    atomic_memory_order_t mo) {						\
-	ATOMIC_INTERLOCKED_REPR(lg_size) ret = a->repr;			\
-	if (mo != atomic_memory_order_relaxed) {			\
-		atomic_fence(atomic_memory_order_acquire);		\
-	}								\
-	return (type) ret;						\
-}									\
-									\
-ATOMIC_INLINE void							\
-atomic_store_##short_type(atomic_##short_type##_t *a,			\
-    type val, atomic_memory_order_t mo) {				\
-	if (mo != atomic_memory_order_relaxed) {			\
-		atomic_fence(atomic_memory_order_release);		\
-	}								\
-	a->repr = (ATOMIC_INTERLOCKED_REPR(lg_size)) val;		\
-	if (mo == atomic_memory_order_seq_cst) {			\
-		atomic_fence(atomic_memory_order_seq_cst);		\
-	}								\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_exchange_##short_type(atomic_##short_type##_t *a, type val,	\
-    atomic_memory_order_t mo) {						\
-	return (type)ATOMIC_INTERLOCKED_NAME(_InterlockedExchange,	\
-	    lg_size)(&a->repr, (ATOMIC_INTERLOCKED_REPR(lg_size))val);	\
-}									\
-									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_weak_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	ATOMIC_INTERLOCKED_REPR(lg_size) e =				\
-	    (ATOMIC_INTERLOCKED_REPR(lg_size))*expected;		\
-	ATOMIC_INTERLOCKED_REPR(lg_size) d =				\
-	    (ATOMIC_INTERLOCKED_REPR(lg_size))desired;			\
-	ATOMIC_INTERLOCKED_REPR(lg_size) old =				\
-	    ATOMIC_INTERLOCKED_NAME(_InterlockedCompareExchange, 	\
-		lg_size)(&a->repr, d, e);				\
-	if (old == e) {							\
-		return true;						\
-	} else {							\
-		*expected = (type)old;					\
-		return false;						\
-	}								\
-}									\
-									\
-ATOMIC_INLINE bool							\
-atomic_compare_exchange_strong_##short_type(atomic_##short_type##_t *a,	\
-    type *expected, type desired, atomic_memory_order_t success_mo,	\
-    atomic_memory_order_t failure_mo) {					\
-	/* We implement the weak version with strong semantics. */	\
-	return atomic_compare_exchange_weak_##short_type(a, expected,	\
-	    desired, success_mo, failure_mo);				\
-}
-
-
-#define JEMALLOC_GENERATE_INT_ATOMICS(type, short_type, lg_size)	\
-JEMALLOC_GENERATE_ATOMICS(type, short_type, lg_size)			\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_add_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return (type)ATOMIC_INTERLOCKED_NAME(_InterlockedExchangeAdd,	\
-	    lg_size)(&a->repr, (ATOMIC_INTERLOCKED_REPR(lg_size))val);	\
-}									\
-									\
-ATOMIC_INLINE type							\
-atomic_fetch_sub_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	/*								\
-	 * MSVC warns on negation of unsigned operands, but for us it	\
-	 * gives exactly the right semantics (MAX_TYPE + 1 - operand).	\
-	 */								\
-	__pragma(warning(push))						\
-	__pragma(warning(disable: 4146))				\
-	return atomic_fetch_add_##short_type(a, -val, mo);		\
-	__pragma(warning(pop))						\
-}									\
-ATOMIC_INLINE type							\
-atomic_fetch_and_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return (type)ATOMIC_INTERLOCKED_NAME(_InterlockedAnd, lg_size)(	\
-	    &a->repr, (ATOMIC_INTERLOCKED_REPR(lg_size))val);		\
-}									\
-ATOMIC_INLINE type							\
-atomic_fetch_or_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return (type)ATOMIC_INTERLOCKED_NAME(_InterlockedOr, lg_size)(	\
-	    &a->repr, (ATOMIC_INTERLOCKED_REPR(lg_size))val);		\
-}									\
-ATOMIC_INLINE type							\
-atomic_fetch_xor_##short_type(atomic_##short_type##_t *a,		\
-    type val, atomic_memory_order_t mo) {				\
-	return (type)ATOMIC_INTERLOCKED_NAME(_InterlockedXor, lg_size)(	\
-	    &a->repr, (ATOMIC_INTERLOCKED_REPR(lg_size))val);		\
-}
-
-#endif /* JEMALLOC_INTERNAL_ATOMIC_MSVC_H */

deps/jemalloc/include/jemalloc/internal/background_thread_externs.h

@@ -1,33 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BACKGROUND_THREAD_EXTERNS_H
-#define JEMALLOC_INTERNAL_BACKGROUND_THREAD_EXTERNS_H
-
-extern bool opt_background_thread;
-extern size_t opt_max_background_threads;
-extern malloc_mutex_t background_thread_lock;
-extern atomic_b_t background_thread_enabled_state;
-extern size_t n_background_threads;
-extern size_t max_background_threads;
-extern background_thread_info_t *background_thread_info;
-extern bool can_enable_background_thread;
-
-bool background_thread_create(tsd_t *tsd, unsigned arena_ind);
-bool background_threads_enable(tsd_t *tsd);
-bool background_threads_disable(tsd_t *tsd);
-void background_thread_interval_check(tsdn_t *tsdn, arena_t *arena,
-    arena_decay_t *decay, size_t npages_new);
-void background_thread_prefork0(tsdn_t *tsdn);
-void background_thread_prefork1(tsdn_t *tsdn);
-void background_thread_postfork_parent(tsdn_t *tsdn);
-void background_thread_postfork_child(tsdn_t *tsdn);
-bool background_thread_stats_read(tsdn_t *tsdn,
-    background_thread_stats_t *stats);
-void background_thread_ctl_init(tsdn_t *tsdn);
-
-#ifdef JEMALLOC_PTHREAD_CREATE_WRAPPER
-extern int pthread_create_wrapper(pthread_t *__restrict, const pthread_attr_t *,
-    void *(*)(void *), void *__restrict);
-#endif
-bool background_thread_boot0(void);
-bool background_thread_boot1(tsdn_t *tsdn);
-
-#endif /* JEMALLOC_INTERNAL_BACKGROUND_THREAD_EXTERNS_H */

deps/jemalloc/include/jemalloc/internal/background_thread_inlines.h

@@ -1,57 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BACKGROUND_THREAD_INLINES_H
-#define JEMALLOC_INTERNAL_BACKGROUND_THREAD_INLINES_H
-
-JEMALLOC_ALWAYS_INLINE bool
-background_thread_enabled(void) {
-	return atomic_load_b(&background_thread_enabled_state, ATOMIC_RELAXED);
-}
-
-JEMALLOC_ALWAYS_INLINE void
-background_thread_enabled_set(tsdn_t *tsdn, bool state) {
-	malloc_mutex_assert_owner(tsdn, &background_thread_lock);
-	atomic_store_b(&background_thread_enabled_state, state, ATOMIC_RELAXED);
-}
-
-JEMALLOC_ALWAYS_INLINE background_thread_info_t *
-arena_background_thread_info_get(arena_t *arena) {
-	unsigned arena_ind = arena_ind_get(arena);
-	return &background_thread_info[arena_ind % ncpus];
-}
-
-JEMALLOC_ALWAYS_INLINE uint64_t
-background_thread_wakeup_time_get(background_thread_info_t *info) {
-	uint64_t next_wakeup = nstime_ns(&info->next_wakeup);
-	assert(atomic_load_b(&info->indefinite_sleep, ATOMIC_ACQUIRE) ==
-	    (next_wakeup == BACKGROUND_THREAD_INDEFINITE_SLEEP));
-	return next_wakeup;
-}
-
-JEMALLOC_ALWAYS_INLINE void
-background_thread_wakeup_time_set(tsdn_t *tsdn, background_thread_info_t *info,
-    uint64_t wakeup_time) {
-	malloc_mutex_assert_owner(tsdn, &info->mtx);
-	atomic_store_b(&info->indefinite_sleep,
-	    wakeup_time == BACKGROUND_THREAD_INDEFINITE_SLEEP, ATOMIC_RELEASE);
-	nstime_init(&info->next_wakeup, wakeup_time);
-}
-
-JEMALLOC_ALWAYS_INLINE bool
-background_thread_indefinite_sleep(background_thread_info_t *info) {
-	return atomic_load_b(&info->indefinite_sleep, ATOMIC_ACQUIRE);
-}
-
-JEMALLOC_ALWAYS_INLINE void
-arena_background_thread_inactivity_check(tsdn_t *tsdn, arena_t *arena,
-    bool is_background_thread) {
-	if (!background_thread_enabled() || is_background_thread) {
-		return;
-	}
-	background_thread_info_t *info =
-	    arena_background_thread_info_get(arena);
-	if (background_thread_indefinite_sleep(info)) {
-		background_thread_interval_check(tsdn, arena,
-		    &arena->decay_dirty, 0);
-	}
-}
-
-#endif /* JEMALLOC_INTERNAL_BACKGROUND_THREAD_INLINES_H */

deps/jemalloc/include/jemalloc/internal/background_thread_structs.h

@@ -1,53 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BACKGROUND_THREAD_STRUCTS_H
-#define JEMALLOC_INTERNAL_BACKGROUND_THREAD_STRUCTS_H
-
-/* This file really combines "structs" and "types", but only transitionally. */
-
-#if defined(JEMALLOC_BACKGROUND_THREAD) || defined(JEMALLOC_LAZY_LOCK)
-#  define JEMALLOC_PTHREAD_CREATE_WRAPPER
-#endif
-
-#define BACKGROUND_THREAD_INDEFINITE_SLEEP UINT64_MAX
-#define MAX_BACKGROUND_THREAD_LIMIT MALLOCX_ARENA_LIMIT
-
-typedef enum {
-	background_thread_stopped,
-	background_thread_started,
-	/* Thread waits on the global lock when paused (for arena_reset). */
-	background_thread_paused,
-} background_thread_state_t;
-
-struct background_thread_info_s {
-#ifdef JEMALLOC_BACKGROUND_THREAD
-	/* Background thread is pthread specific. */
-	pthread_t		thread;
-	pthread_cond_t		cond;
-#endif
-	malloc_mutex_t		mtx;
-	background_thread_state_t	state;
-	/* When true, it means no wakeup scheduled. */
-	atomic_b_t		indefinite_sleep;
-	/* Next scheduled wakeup time (absolute time in ns). */
-	nstime_t		next_wakeup;
-	/*
-	 *  Since the last background thread run, newly added number of pages
-	 *  that need to be purged by the next wakeup.  This is adjusted on
-	 *  epoch advance, and is used to determine whether we should signal the
-	 *  background thread to wake up earlier.
-	 */
-	size_t			npages_to_purge_new;
-	/* Stats: total number of runs since started. */
-	uint64_t		tot_n_runs;
-	/* Stats: total sleep time since started. */
-	nstime_t		tot_sleep_time;
-};
-typedef struct background_thread_info_s background_thread_info_t;
-
-struct background_thread_stats_s {
-	size_t num_threads;
-	uint64_t num_runs;
-	nstime_t run_interval;
-};
-typedef struct background_thread_stats_s background_thread_stats_t;
-
-#endif /* JEMALLOC_INTERNAL_BACKGROUND_THREAD_STRUCTS_H */

deps/jemalloc/include/jemalloc/internal/base.h

@@ -0,0 +1,26 @@
+/******************************************************************************/
+#ifdef JEMALLOC_H_TYPES
+
+#endif /* JEMALLOC_H_TYPES */
+/******************************************************************************/
+#ifdef JEMALLOC_H_STRUCTS
+
+#endif /* JEMALLOC_H_STRUCTS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_EXTERNS
+
+void	*base_alloc(size_t size);
+void	*base_calloc(size_t number, size_t size);
+extent_node_t *base_node_alloc(void);
+void	base_node_dealloc(extent_node_t *node);
+bool	base_boot(void);
+void	base_prefork(void);
+void	base_postfork_parent(void);
+void	base_postfork_child(void);
+
+#endif /* JEMALLOC_H_EXTERNS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_INLINES
+
+#endif /* JEMALLOC_H_INLINES */
+/******************************************************************************/

deps/jemalloc/include/jemalloc/internal/base_externs.h

@@ -1,22 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BASE_EXTERNS_H
-#define JEMALLOC_INTERNAL_BASE_EXTERNS_H
-
-extern metadata_thp_mode_t opt_metadata_thp;
-extern const char *metadata_thp_mode_names[];
-
-base_t *b0get(void);
-base_t *base_new(tsdn_t *tsdn, unsigned ind, extent_hooks_t *extent_hooks);
-void base_delete(tsdn_t *tsdn, base_t *base);
-extent_hooks_t *base_extent_hooks_get(base_t *base);
-extent_hooks_t *base_extent_hooks_set(base_t *base,
-    extent_hooks_t *extent_hooks);
-void *base_alloc(tsdn_t *tsdn, base_t *base, size_t size, size_t alignment);
-extent_t *base_alloc_extent(tsdn_t *tsdn, base_t *base);
-void base_stats_get(tsdn_t *tsdn, base_t *base, size_t *allocated,
-    size_t *resident, size_t *mapped, size_t *n_thp);
-void base_prefork(tsdn_t *tsdn, base_t *base);
-void base_postfork_parent(tsdn_t *tsdn, base_t *base);
-void base_postfork_child(tsdn_t *tsdn, base_t *base);
-bool base_boot(tsdn_t *tsdn);
-
-#endif /* JEMALLOC_INTERNAL_BASE_EXTERNS_H */

deps/jemalloc/include/jemalloc/internal/base_inlines.h

@@ -1,13 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BASE_INLINES_H
-#define JEMALLOC_INTERNAL_BASE_INLINES_H
-
-static inline unsigned
-base_ind_get(const base_t *base) {
-	return base->ind;
-}
-
-static inline bool
-metadata_thp_enabled(void) {
-	return (opt_metadata_thp != metadata_thp_disabled);
-}
-#endif /* JEMALLOC_INTERNAL_BASE_INLINES_H */

deps/jemalloc/include/jemalloc/internal/base_structs.h

@@ -1,59 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BASE_STRUCTS_H
-#define JEMALLOC_INTERNAL_BASE_STRUCTS_H
-
-#include "jemalloc/internal/jemalloc_internal_types.h"
-#include "jemalloc/internal/mutex.h"
-#include "jemalloc/internal/size_classes.h"
-
-/* Embedded at the beginning of every block of base-managed virtual memory. */
-struct base_block_s {
-	/* Total size of block's virtual memory mapping. */
-	size_t		size;
-
-	/* Next block in list of base's blocks. */
-	base_block_t	*next;
-
-	/* Tracks unused trailing space. */
-	extent_t	extent;
-};
-
-struct base_s {
-	/* Associated arena's index within the arenas array. */
-	unsigned	ind;
-
-	/*
-	 * User-configurable extent hook functions.  Points to an
-	 * extent_hooks_t.
-	 */
-	atomic_p_t	extent_hooks;
-
-	/* Protects base_alloc() and base_stats_get() operations. */
-	malloc_mutex_t	mtx;
-
-	/* Using THP when true (metadata_thp auto mode). */
-	bool		auto_thp_switched;
-	/*
-	 * Most recent size class in the series of increasingly large base
-	 * extents.  Logarithmic spacing between subsequent allocations ensures
-	 * that the total number of distinct mappings remains small.
-	 */
-	pszind_t	pind_last;
-
-	/* Serial number generation state. */
-	size_t		extent_sn_next;
-
-	/* Chain of all blocks associated with base. */
-	base_block_t	*blocks;
-
-	/* Heap of extents that track unused trailing space within blocks. */
-	extent_heap_t	avail[NSIZES];
-
-	/* Stats, only maintained if config_stats. */
-	size_t		allocated;
-	size_t		resident;
-	size_t		mapped;
-	/* Number of THP regions touched. */
-	size_t		n_thp;
-};
-
-#endif /* JEMALLOC_INTERNAL_BASE_STRUCTS_H */

deps/jemalloc/include/jemalloc/internal/base_types.h

@@ -1,33 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BASE_TYPES_H
-#define JEMALLOC_INTERNAL_BASE_TYPES_H
-
-typedef struct base_block_s base_block_t;
-typedef struct base_s base_t;
-
-#define METADATA_THP_DEFAULT metadata_thp_disabled
-
-/*
- * In auto mode, arenas switch to huge pages for the base allocator on the
- * second base block.  a0 switches to thp on the 5th block (after 20 megabytes
- * of metadata), since more metadata (e.g. rtree nodes) come from a0's base.
- */
-
-#define BASE_AUTO_THP_THRESHOLD    2
-#define BASE_AUTO_THP_THRESHOLD_A0 5
-
-typedef enum {
-	metadata_thp_disabled   = 0,
-	/*
-	 * Lazily enable hugepage for metadata. To avoid high RSS caused by THP
-	 * + low usage arena (i.e. THP becomes a significant percentage), the
-	 * "auto" option only starts using THP after a base allocator used up
-	 * the first THP region.  Starting from the second hugepage (in a single
-	 * arena), "auto" behaves the same as "always", i.e. madvise hugepage
-	 * right away.
-	 */
-	metadata_thp_auto       = 1,
-	metadata_thp_always     = 2,
-	metadata_thp_mode_limit = 3
-} metadata_thp_mode_t;
-
-#endif /* JEMALLOC_INTERNAL_BASE_TYPES_H */

deps/jemalloc/include/jemalloc/internal/bin.h

@@ -1,106 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BIN_H
-#define JEMALLOC_INTERNAL_BIN_H
-
-#include "jemalloc/internal/extent_types.h"
-#include "jemalloc/internal/extent_structs.h"
-#include "jemalloc/internal/mutex.h"
-#include "jemalloc/internal/bin_stats.h"
-
-/*
- * A bin contains a set of extents that are currently being used for slab
- * allocations.
- */
-
-/*
- * Read-only information associated with each element of arena_t's bins array
- * is stored separately, partly to reduce memory usage (only one copy, rather
- * than one per arena), but mainly to avoid false cacheline sharing.
- *
- * Each slab has the following layout:
- *
- *   /--------------------\
- *   | region 0           |
- *   |--------------------|
- *   | region 1           |
- *   |--------------------|
- *   | ...                |
- *   | ...                |
- *   | ...                |
- *   |--------------------|
- *   | region nregs-1     |
- *   \--------------------/
- */
-typedef struct bin_info_s bin_info_t;
-struct bin_info_s {
-	/* Size of regions in a slab for this bin's size class. */
-	size_t			reg_size;
-
-	/* Total size of a slab for this bin's size class. */
-	size_t			slab_size;
-
-	/* Total number of regions in a slab for this bin's size class. */
-	uint32_t		nregs;
-
-	/*
-	 * Metadata used to manipulate bitmaps for slabs associated with this
-	 * bin.
-	 */
-	bitmap_info_t		bitmap_info;
-};
-
-extern const bin_info_t bin_infos[NBINS];
-
-
-typedef struct bin_s bin_t;
-struct bin_s {
-	/* All operations on bin_t fields require lock ownership. */
-	malloc_mutex_t		lock;
-
-	/*
-	 * Current slab being used to service allocations of this bin's size
-	 * class.  slabcur is independent of slabs_{nonfull,full}; whenever
-	 * slabcur is reassigned, the previous slab must be deallocated or
-	 * inserted into slabs_{nonfull,full}.
-	 */
-	extent_t		*slabcur;
-
-	/*
-	 * Heap of non-full slabs.  This heap is used to assure that new
-	 * allocations come from the non-full slab that is oldest/lowest in
-	 * memory.
-	 */
-	extent_heap_t		slabs_nonfull;
-
-	/* List used to track full slabs. */
-	extent_list_t		slabs_full;
-
-	/* Bin statistics. */
-	bin_stats_t	stats;
-};
-
-/* Initializes a bin to empty.  Returns true on error. */
-bool bin_init(bin_t *bin);
-
-/* Forking. */
-void bin_prefork(tsdn_t *tsdn, bin_t *bin);
-void bin_postfork_parent(tsdn_t *tsdn, bin_t *bin);
-void bin_postfork_child(tsdn_t *tsdn, bin_t *bin);
-
-/* Stats. */
-static inline void
-bin_stats_merge(tsdn_t *tsdn, bin_stats_t *dst_bin_stats, bin_t *bin) {
-	malloc_mutex_lock(tsdn, &bin->lock);
-	malloc_mutex_prof_read(tsdn, &dst_bin_stats->mutex_data, &bin->lock);
-	dst_bin_stats->nmalloc += bin->stats.nmalloc;
-	dst_bin_stats->ndalloc += bin->stats.ndalloc;
-	dst_bin_stats->nrequests += bin->stats.nrequests;
-	dst_bin_stats->curregs += bin->stats.curregs;
-	dst_bin_stats->nfills += bin->stats.nfills;
-	dst_bin_stats->nflushes += bin->stats.nflushes;
-	dst_bin_stats->nslabs += bin->stats.nslabs;
-	dst_bin_stats->reslabs += bin->stats.reslabs;
-	dst_bin_stats->curslabs += bin->stats.curslabs;
-	malloc_mutex_unlock(tsdn, &bin->lock);
-}
-
-#endif /* JEMALLOC_INTERNAL_BIN_H */

deps/jemalloc/include/jemalloc/internal/bin_stats.h

@@ -1,51 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BIN_STATS_H
-#define JEMALLOC_INTERNAL_BIN_STATS_H
-
-#include "jemalloc/internal/mutex_prof.h"
-
-typedef struct bin_stats_s bin_stats_t;
-struct bin_stats_s {
-	/*
-	 * Total number of allocation/deallocation requests served directly by
-	 * the bin.  Note that tcache may allocate an object, then recycle it
-	 * many times, resulting many increments to nrequests, but only one
-	 * each to nmalloc and ndalloc.
-	 */
-	uint64_t	nmalloc;
-	uint64_t	ndalloc;
-
-	/*
-	 * Number of allocation requests that correspond to the size of this
-	 * bin.  This includes requests served by tcache, though tcache only
-	 * periodically merges into this counter.
-	 */
-	uint64_t	nrequests;
-
-	/*
-	 * Current number of regions of this size class, including regions
-	 * currently cached by tcache.
-	 */
-	size_t		curregs;
-
-	/* Number of tcache fills from this bin. */
-	uint64_t	nfills;
-
-	/* Number of tcache flushes to this bin. */
-	uint64_t	nflushes;
-
-	/* Total number of slabs created for this bin's size class. */
-	uint64_t	nslabs;
-
-	/*
-	 * Total number of slabs reused by extracting them from the slabs heap
-	 * for this bin's size class.
-	 */
-	uint64_t	reslabs;
-
-	/* Current number of slabs in this bin. */
-	size_t		curslabs;
-
-	mutex_prof_data_t mutex_data;
-};
-
-#endif /* JEMALLOC_INTERNAL_BIN_STATS_H */

deps/jemalloc/include/jemalloc/internal/bit_util.h

@@ -1,165 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_BIT_UTIL_H
-#define JEMALLOC_INTERNAL_BIT_UTIL_H
-
-#include "jemalloc/internal/assert.h"
-
-#define BIT_UTIL_INLINE static inline
-
-/* Sanity check. */
-#if !defined(JEMALLOC_INTERNAL_FFSLL) || !defined(JEMALLOC_INTERNAL_FFSL) \
-    || !defined(JEMALLOC_INTERNAL_FFS)
-#  error JEMALLOC_INTERNAL_FFS{,L,LL} should have been defined by configure
-#endif
-
-
-BIT_UTIL_INLINE unsigned
-ffs_llu(unsigned long long bitmap) {
-	return JEMALLOC_INTERNAL_FFSLL(bitmap);
-}
-
-BIT_UTIL_INLINE unsigned
-ffs_lu(unsigned long bitmap) {
-	return JEMALLOC_INTERNAL_FFSL(bitmap);
-}
-
-BIT_UTIL_INLINE unsigned
-ffs_u(unsigned bitmap) {
-	return JEMALLOC_INTERNAL_FFS(bitmap);
-}
-
-BIT_UTIL_INLINE unsigned
-ffs_zu(size_t bitmap) {
-#if LG_SIZEOF_PTR == LG_SIZEOF_INT
-	return ffs_u(bitmap);
-#elif LG_SIZEOF_PTR == LG_SIZEOF_LONG
-	return ffs_lu(bitmap);
-#elif LG_SIZEOF_PTR == LG_SIZEOF_LONG_LONG
-	return ffs_llu(bitmap);
-#else
-#error No implementation for size_t ffs()
-#endif
-}
-
-BIT_UTIL_INLINE unsigned
-ffs_u64(uint64_t bitmap) {
-#if LG_SIZEOF_LONG == 3
-	return ffs_lu(bitmap);
-#elif LG_SIZEOF_LONG_LONG == 3
-	return ffs_llu(bitmap);
-#else
-#error No implementation for 64-bit ffs()
-#endif
-}
-
-BIT_UTIL_INLINE unsigned
-ffs_u32(uint32_t bitmap) {
-#if LG_SIZEOF_INT == 2
-	return ffs_u(bitmap);
-#else
-#error No implementation for 32-bit ffs()
-#endif
-	return ffs_u(bitmap);
-}
-
-BIT_UTIL_INLINE uint64_t
-pow2_ceil_u64(uint64_t x) {
-	x--;
-	x |= x >> 1;
-	x |= x >> 2;
-	x |= x >> 4;
-	x |= x >> 8;
-	x |= x >> 16;
-	x |= x >> 32;
-	x++;
-	return x;
-}
-
-BIT_UTIL_INLINE uint32_t
-pow2_ceil_u32(uint32_t x) {
-	x--;
-	x |= x >> 1;
-	x |= x >> 2;
-	x |= x >> 4;
-	x |= x >> 8;
-	x |= x >> 16;
-	x++;
-	return x;
-}
-
-/* Compute the smallest power of 2 that is >= x. */
-BIT_UTIL_INLINE size_t
-pow2_ceil_zu(size_t x) {
-#if (LG_SIZEOF_PTR == 3)
-	return pow2_ceil_u64(x);
-#else
-	return pow2_ceil_u32(x);
-#endif
-}
-
-#if (defined(__i386__) || defined(__amd64__) || defined(__x86_64__))
-BIT_UTIL_INLINE unsigned
-lg_floor(size_t x) {
-	size_t ret;
-	assert(x != 0);
-
-	asm ("bsr %1, %0"
-	    : "=r"(ret) // Outputs.
-	    : "r"(x)    // Inputs.
-	    );
-	assert(ret < UINT_MAX);
-	return (unsigned)ret;
-}
-#elif (defined(_MSC_VER))
-BIT_UTIL_INLINE unsigned
-lg_floor(size_t x) {
-	unsigned long ret;
-
-	assert(x != 0);
-
-#if (LG_SIZEOF_PTR == 3)
-	_BitScanReverse64(&ret, x);
-#elif (LG_SIZEOF_PTR == 2)
-	_BitScanReverse(&ret, x);
-#else
-#  error "Unsupported type size for lg_floor()"
-#endif
-	assert(ret < UINT_MAX);
-	return (unsigned)ret;
-}
-#elif (defined(JEMALLOC_HAVE_BUILTIN_CLZ))
-BIT_UTIL_INLINE unsigned
-lg_floor(size_t x) {
-	assert(x != 0);
-
-#if (LG_SIZEOF_PTR == LG_SIZEOF_INT)
-	return ((8 << LG_SIZEOF_PTR) - 1) - __builtin_clz(x);
-#elif (LG_SIZEOF_PTR == LG_SIZEOF_LONG)
-	return ((8 << LG_SIZEOF_PTR) - 1) - __builtin_clzl(x);
-#else
-#  error "Unsupported type size for lg_floor()"
-#endif
-}
-#else
-BIT_UTIL_INLINE unsigned
-lg_floor(size_t x) {
-	assert(x != 0);
-
-	x |= (x >> 1);
-	x |= (x >> 2);
-	x |= (x >> 4);
-	x |= (x >> 8);
-	x |= (x >> 16);
-#if (LG_SIZEOF_PTR == 3)
-	x |= (x >> 32);
-#endif
-	if (x == SIZE_T_MAX) {
-		return (8 << LG_SIZEOF_PTR) - 1;
-	}
-	x++;
-	return ffs_zu(x) - 2;
-}
-#endif
-
-#undef BIT_UTIL_INLINE
-
-#endif /* JEMALLOC_INTERNAL_BIT_UTIL_H */

deps/jemalloc/include/jemalloc/internal/bitmap.h

@@ -1,159 +1,37 @@
-#ifndef JEMALLOC_INTERNAL_BITMAP_H
-#define JEMALLOC_INTERNAL_BITMAP_H
-
-#include "jemalloc/internal/arena_types.h"
-#include "jemalloc/internal/bit_util.h"
-#include "jemalloc/internal/size_classes.h"
-
-typedef unsigned long bitmap_t;
-#define LG_SIZEOF_BITMAP	LG_SIZEOF_LONG
+/******************************************************************************/
+#ifdef JEMALLOC_H_TYPES
 
 /* Maximum bitmap bit count is 2^LG_BITMAP_MAXBITS. */
-#if LG_SLAB_MAXREGS > LG_CEIL_NSIZES
-/* Maximum bitmap bit count is determined by maximum regions per slab. */
-#  define LG_BITMAP_MAXBITS	LG_SLAB_MAXREGS
-#else
-/* Maximum bitmap bit count is determined by number of extent size classes. */
-#  define LG_BITMAP_MAXBITS	LG_CEIL_NSIZES
-#endif
-#define BITMAP_MAXBITS		(ZU(1) << LG_BITMAP_MAXBITS)
+#define	LG_BITMAP_MAXBITS	LG_RUN_MAXREGS
+
+typedef struct bitmap_level_s bitmap_level_t;
+typedef struct bitmap_info_s bitmap_info_t;
+typedef unsigned long bitmap_t;
+#define	LG_SIZEOF_BITMAP	LG_SIZEOF_LONG
 
 /* Number of bits per group. */
-#define LG_BITMAP_GROUP_NBITS		(LG_SIZEOF_BITMAP + 3)
-#define BITMAP_GROUP_NBITS		(1U << LG_BITMAP_GROUP_NBITS)
-#define BITMAP_GROUP_NBITS_MASK		(BITMAP_GROUP_NBITS-1)
+#define	LG_BITMAP_GROUP_NBITS		(LG_SIZEOF_BITMAP + 3)
+#define	BITMAP_GROUP_NBITS		(ZU(1) << LG_BITMAP_GROUP_NBITS)
+#define	BITMAP_GROUP_NBITS_MASK		(BITMAP_GROUP_NBITS-1)
 
-/*
- * Do some analysis on how big the bitmap is before we use a tree.  For a brute
- * force linear search, if we would have to call ffs_lu() more than 2^3 times,
- * use a tree instead.
- */
-#if LG_BITMAP_MAXBITS - LG_BITMAP_GROUP_NBITS > 3
-#  define BITMAP_USE_TREE
-#endif
+/* Maximum number of levels possible. */
+#define	BITMAP_MAX_LEVELS						\
+    (LG_BITMAP_MAXBITS / LG_SIZEOF_BITMAP)				\
+    + !!(LG_BITMAP_MAXBITS % LG_SIZEOF_BITMAP)
 
-/* Number of groups required to store a given number of bits. */
-#define BITMAP_BITS2GROUPS(nbits)					\
-    (((nbits) + BITMAP_GROUP_NBITS_MASK) >> LG_BITMAP_GROUP_NBITS)
+#endif /* JEMALLOC_H_TYPES */
+/******************************************************************************/
+#ifdef JEMALLOC_H_STRUCTS
 
-/*
- * Number of groups required at a particular level for a given number of bits.
- */
-#define BITMAP_GROUPS_L0(nbits)						\
-    BITMAP_BITS2GROUPS(nbits)
-#define BITMAP_GROUPS_L1(nbits)						\
-    BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS(nbits))
-#define BITMAP_GROUPS_L2(nbits)						\
-    BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS((nbits))))
-#define BITMAP_GROUPS_L3(nbits)						\
-    BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS(		\
-	BITMAP_BITS2GROUPS((nbits)))))
-#define BITMAP_GROUPS_L4(nbits)						\
-    BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS(		\
-	BITMAP_BITS2GROUPS(BITMAP_BITS2GROUPS((nbits))))))
-
-/*
- * Assuming the number of levels, number of groups required for a given number
- * of bits.
- */
-#define BITMAP_GROUPS_1_LEVEL(nbits)					\
-    BITMAP_GROUPS_L0(nbits)
-#define BITMAP_GROUPS_2_LEVEL(nbits)					\
-    (BITMAP_GROUPS_1_LEVEL(nbits) + BITMAP_GROUPS_L1(nbits))
-#define BITMAP_GROUPS_3_LEVEL(nbits)					\
-    (BITMAP_GROUPS_2_LEVEL(nbits) + BITMAP_GROUPS_L2(nbits))
-#define BITMAP_GROUPS_4_LEVEL(nbits)					\
-    (BITMAP_GROUPS_3_LEVEL(nbits) + BITMAP_GROUPS_L3(nbits))
-#define BITMAP_GROUPS_5_LEVEL(nbits)					\
-    (BITMAP_GROUPS_4_LEVEL(nbits) + BITMAP_GROUPS_L4(nbits))
-
-/*
- * Maximum number of groups required to support LG_BITMAP_MAXBITS.
- */
-#ifdef BITMAP_USE_TREE
-
-#if LG_BITMAP_MAXBITS <= LG_BITMAP_GROUP_NBITS
-#  define BITMAP_GROUPS(nbits)	BITMAP_GROUPS_1_LEVEL(nbits)
-#  define BITMAP_GROUPS_MAX	BITMAP_GROUPS_1_LEVEL(BITMAP_MAXBITS)
-#elif LG_BITMAP_MAXBITS <= LG_BITMAP_GROUP_NBITS * 2
-#  define BITMAP_GROUPS(nbits)	BITMAP_GROUPS_2_LEVEL(nbits)
-#  define BITMAP_GROUPS_MAX	BITMAP_GROUPS_2_LEVEL(BITMAP_MAXBITS)
-#elif LG_BITMAP_MAXBITS <= LG_BITMAP_GROUP_NBITS * 3
-#  define BITMAP_GROUPS(nbits)	BITMAP_GROUPS_3_LEVEL(nbits)
-#  define BITMAP_GROUPS_MAX	BITMAP_GROUPS_3_LEVEL(BITMAP_MAXBITS)
-#elif LG_BITMAP_MAXBITS <= LG_BITMAP_GROUP_NBITS * 4
-#  define BITMAP_GROUPS(nbits)	BITMAP_GROUPS_4_LEVEL(nbits)
-#  define BITMAP_GROUPS_MAX	BITMAP_GROUPS_4_LEVEL(BITMAP_MAXBITS)
-#elif LG_BITMAP_MAXBITS <= LG_BITMAP_GROUP_NBITS * 5
-#  define BITMAP_GROUPS(nbits)	BITMAP_GROUPS_5_LEVEL(nbits)
-#  define BITMAP_GROUPS_MAX	BITMAP_GROUPS_5_LEVEL(BITMAP_MAXBITS)
-#else
-#  error "Unsupported bitmap size"
-#endif
-
-/*
- * Maximum number of levels possible.  This could be statically computed based
- * on LG_BITMAP_MAXBITS:
- *
- * #define BITMAP_MAX_LEVELS \
- *     (LG_BITMAP_MAXBITS / LG_SIZEOF_BITMAP) \
- *     + !!(LG_BITMAP_MAXBITS % LG_SIZEOF_BITMAP)
- *
- * However, that would not allow the generic BITMAP_INFO_INITIALIZER() macro, so
- * instead hardcode BITMAP_MAX_LEVELS to the largest number supported by the
- * various cascading macros.  The only additional cost this incurs is some
- * unused trailing entries in bitmap_info_t structures; the bitmaps themselves
- * are not impacted.
- */
-#define BITMAP_MAX_LEVELS	5
-
-#define BITMAP_INFO_INITIALIZER(nbits) {				\
-	/* nbits. */							\
-	nbits,								\
-	/* nlevels. */							\
-	(BITMAP_GROUPS_L0(nbits) > BITMAP_GROUPS_L1(nbits)) +		\
-	    (BITMAP_GROUPS_L1(nbits) > BITMAP_GROUPS_L2(nbits)) +	\
-	    (BITMAP_GROUPS_L2(nbits) > BITMAP_GROUPS_L3(nbits)) +	\
-	    (BITMAP_GROUPS_L3(nbits) > BITMAP_GROUPS_L4(nbits)) + 1,	\
-	/* levels. */							\
-	{								\
-		{0},							\
-		{BITMAP_GROUPS_L0(nbits)},				\
-		{BITMAP_GROUPS_L1(nbits) + BITMAP_GROUPS_L0(nbits)},	\
-		{BITMAP_GROUPS_L2(nbits) + BITMAP_GROUPS_L1(nbits) +	\
-		    BITMAP_GROUPS_L0(nbits)},				\
-		{BITMAP_GROUPS_L3(nbits) + BITMAP_GROUPS_L2(nbits) +	\
-		    BITMAP_GROUPS_L1(nbits) + BITMAP_GROUPS_L0(nbits)},	\
-		{BITMAP_GROUPS_L4(nbits) + BITMAP_GROUPS_L3(nbits) +	\
-		     BITMAP_GROUPS_L2(nbits) + BITMAP_GROUPS_L1(nbits)	\
-		     + BITMAP_GROUPS_L0(nbits)}				\
-	}								\
-}
-
-#else /* BITMAP_USE_TREE */
-
-#define BITMAP_GROUPS(nbits)	BITMAP_BITS2GROUPS(nbits)
-#define BITMAP_GROUPS_MAX	BITMAP_BITS2GROUPS(BITMAP_MAXBITS)
-
-#define BITMAP_INFO_INITIALIZER(nbits) {				\
-	/* nbits. */							\
-	nbits,								\
-	/* ngroups. */							\
-	BITMAP_BITS2GROUPS(nbits)					\
-}
-
-#endif /* BITMAP_USE_TREE */
-
-typedef struct bitmap_level_s {
+struct bitmap_level_s {
 	/* Offset of this level's groups within the array of groups. */
 	size_t group_offset;
-} bitmap_level_t;
+};
 
-typedef struct bitmap_info_s {
+struct bitmap_info_s {
 	/* Logical number of bits in bitmap (stored at bottom level). */
 	size_t nbits;
 
-#ifdef BITMAP_USE_TREE
 	/* Number of levels necessary for nbits. */
 	unsigned nlevels;
 
@@ -162,62 +40,67 @@ typedef struct bitmap_info_s {
 	 * bottom to top (e.g. the bottom level is stored in levels[0]).
 	 */
 	bitmap_level_t levels[BITMAP_MAX_LEVELS+1];
-#else /* BITMAP_USE_TREE */
-	/* Number of groups necessary for nbits. */
-	size_t ngroups;
-#endif /* BITMAP_USE_TREE */
-} bitmap_info_t;
+};
 
-void bitmap_info_init(bitmap_info_t *binfo, size_t nbits);
-void bitmap_init(bitmap_t *bitmap, const bitmap_info_t *binfo, bool fill);
-size_t bitmap_size(const bitmap_info_t *binfo);
+#endif /* JEMALLOC_H_STRUCTS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_EXTERNS
 
-static inline bool
-bitmap_full(bitmap_t *bitmap, const bitmap_info_t *binfo) {
-#ifdef BITMAP_USE_TREE
-	size_t rgoff = binfo->levels[binfo->nlevels].group_offset - 1;
+void	bitmap_info_init(bitmap_info_t *binfo, size_t nbits);
+size_t	bitmap_info_ngroups(const bitmap_info_t *binfo);
+size_t	bitmap_size(size_t nbits);
+void	bitmap_init(bitmap_t *bitmap, const bitmap_info_t *binfo);
+
+#endif /* JEMALLOC_H_EXTERNS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_INLINES
+
+#ifndef JEMALLOC_ENABLE_INLINE
+bool	bitmap_full(bitmap_t *bitmap, const bitmap_info_t *binfo);
+bool	bitmap_get(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit);
+void	bitmap_set(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit);
+size_t	bitmap_sfu(bitmap_t *bitmap, const bitmap_info_t *binfo);
+void	bitmap_unset(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit);
+#endif
+
+#if (defined(JEMALLOC_ENABLE_INLINE) || defined(JEMALLOC_BITMAP_C_))
+JEMALLOC_INLINE bool
+bitmap_full(bitmap_t *bitmap, const bitmap_info_t *binfo)
+{
+	unsigned rgoff = binfo->levels[binfo->nlevels].group_offset - 1;
 	bitmap_t rg = bitmap[rgoff];
 	/* The bitmap is full iff the root group is 0. */
 	return (rg == 0);
-#else
-	size_t i;
-
-	for (i = 0; i < binfo->ngroups; i++) {
-		if (bitmap[i] != 0) {
-			return false;
-		}
-	}
-	return true;
-#endif
 }
 
-static inline bool
-bitmap_get(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit) {
+JEMALLOC_INLINE bool
+bitmap_get(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit)
+{
 	size_t goff;
 	bitmap_t g;
 
 	assert(bit < binfo->nbits);
 	goff = bit >> LG_BITMAP_GROUP_NBITS;
 	g = bitmap[goff];
-	return !(g & (ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK)));
+	return (!(g & (1LU << (bit & BITMAP_GROUP_NBITS_MASK))));
 }
 
-static inline void
-bitmap_set(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit) {
+JEMALLOC_INLINE void
+bitmap_set(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit)
+{
 	size_t goff;
 	bitmap_t *gp;
 	bitmap_t g;
 
 	assert(bit < binfo->nbits);
-	assert(!bitmap_get(bitmap, binfo, bit));
+	assert(bitmap_get(bitmap, binfo, bit) == false);
 	goff = bit >> LG_BITMAP_GROUP_NBITS;
 	gp = &bitmap[goff];
 	g = *gp;
-	assert(g & (ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK)));
-	g ^= ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK);
+	assert(g & (1LU << (bit & BITMAP_GROUP_NBITS_MASK)));
+	g ^= 1LU << (bit & BITMAP_GROUP_NBITS_MASK);
 	*gp = g;
 	assert(bitmap_get(bitmap, binfo, bit));
-#ifdef BITMAP_USE_TREE
 	/* Propagate group state transitions up the tree. */
 	if (g == 0) {
 		unsigned i;
@@ -226,113 +109,45 @@ bitmap_set(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit) {
 			goff = bit >> LG_BITMAP_GROUP_NBITS;
 			gp = &bitmap[binfo->levels[i].group_offset + goff];
 			g = *gp;
-			assert(g & (ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK)));
-			g ^= ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK);
+			assert(g & (1LU << (bit & BITMAP_GROUP_NBITS_MASK)));
+			g ^= 1LU << (bit & BITMAP_GROUP_NBITS_MASK);
 			*gp = g;
-			if (g != 0) {
+			if (g != 0)
 				break;
-			}
 		}
 	}
-#endif
-}
-
-/* ffu: find first unset >= bit. */
-static inline size_t
-bitmap_ffu(const bitmap_t *bitmap, const bitmap_info_t *binfo, size_t min_bit) {
-	assert(min_bit < binfo->nbits);
-
-#ifdef BITMAP_USE_TREE
-	size_t bit = 0;
-	for (unsigned level = binfo->nlevels; level--;) {
-		size_t lg_bits_per_group = (LG_BITMAP_GROUP_NBITS * (level +
-		    1));
-		bitmap_t group = bitmap[binfo->levels[level].group_offset + (bit
-		    >> lg_bits_per_group)];
-		unsigned group_nmask = (unsigned)(((min_bit > bit) ? (min_bit -
-		    bit) : 0) >> (lg_bits_per_group - LG_BITMAP_GROUP_NBITS));
-		assert(group_nmask <= BITMAP_GROUP_NBITS);
-		bitmap_t group_mask = ~((1LU << group_nmask) - 1);
-		bitmap_t group_masked = group & group_mask;
-		if (group_masked == 0LU) {
-			if (group == 0LU) {
-				return binfo->nbits;
-			}
-			/*
-			 * min_bit was preceded by one or more unset bits in
-			 * this group, but there are no other unset bits in this
-			 * group.  Try again starting at the first bit of the
-			 * next sibling.  This will recurse at most once per
-			 * non-root level.
-			 */
-			size_t sib_base = bit + (ZU(1) << lg_bits_per_group);
-			assert(sib_base > min_bit);
-			assert(sib_base > bit);
-			if (sib_base >= binfo->nbits) {
-				return binfo->nbits;
-			}
-			return bitmap_ffu(bitmap, binfo, sib_base);
-		}
-		bit += ((size_t)(ffs_lu(group_masked) - 1)) <<
-		    (lg_bits_per_group - LG_BITMAP_GROUP_NBITS);
-	}
-	assert(bit >= min_bit);
-	assert(bit < binfo->nbits);
-	return bit;
-#else
-	size_t i = min_bit >> LG_BITMAP_GROUP_NBITS;
-	bitmap_t g = bitmap[i] & ~((1LU << (min_bit & BITMAP_GROUP_NBITS_MASK))
-	    - 1);
-	size_t bit;
-	do {
-		bit = ffs_lu(g);
-		if (bit != 0) {
-			return (i << LG_BITMAP_GROUP_NBITS) + (bit - 1);
-		}
-		i++;
-		g = bitmap[i];
-	} while (i < binfo->ngroups);
-	return binfo->nbits;
-#endif
 }
 
 /* sfu: set first unset. */
-static inline size_t
-bitmap_sfu(bitmap_t *bitmap, const bitmap_info_t *binfo) {
+JEMALLOC_INLINE size_t
+bitmap_sfu(bitmap_t *bitmap, const bitmap_info_t *binfo)
+{
 	size_t bit;
 	bitmap_t g;
 	unsigned i;
 
-	assert(!bitmap_full(bitmap, binfo));
+	assert(bitmap_full(bitmap, binfo) == false);
 
-#ifdef BITMAP_USE_TREE
 	i = binfo->nlevels - 1;
 	g = bitmap[binfo->levels[i].group_offset];
-	bit = ffs_lu(g) - 1;
+	bit = ffsl(g) - 1;
 	while (i > 0) {
 		i--;
 		g = bitmap[binfo->levels[i].group_offset + bit];
-		bit = (bit << LG_BITMAP_GROUP_NBITS) + (ffs_lu(g) - 1);
+		bit = (bit << LG_BITMAP_GROUP_NBITS) + (ffsl(g) - 1);
 	}
-#else
-	i = 0;
-	g = bitmap[0];
-	while ((bit = ffs_lu(g)) == 0) {
-		i++;
-		g = bitmap[i];
-	}
-	bit = (i << LG_BITMAP_GROUP_NBITS) + (bit - 1);
-#endif
+
 	bitmap_set(bitmap, binfo, bit);
-	return bit;
+	return (bit);
 }
 
-static inline void
-bitmap_unset(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit) {
+JEMALLOC_INLINE void
+bitmap_unset(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit)
+{
 	size_t goff;
 	bitmap_t *gp;
 	bitmap_t g;
-	UNUSED bool propagate;
+	bool propagate;
 
 	assert(bit < binfo->nbits);
 	assert(bitmap_get(bitmap, binfo, bit));
@@ -340,11 +155,10 @@ bitmap_unset(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit) {
 	gp = &bitmap[goff];
 	g = *gp;
 	propagate = (g == 0);
-	assert((g & (ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK))) == 0);
-	g ^= ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK);
+	assert((g & (1LU << (bit & BITMAP_GROUP_NBITS_MASK))) == 0);
+	g ^= 1LU << (bit & BITMAP_GROUP_NBITS_MASK);
 	*gp = g;
-	assert(!bitmap_get(bitmap, binfo, bit));
-#ifdef BITMAP_USE_TREE
+	assert(bitmap_get(bitmap, binfo, bit) == false);
 	/* Propagate group state transitions up the tree. */
 	if (propagate) {
 		unsigned i;
@@ -354,16 +168,17 @@ bitmap_unset(bitmap_t *bitmap, const bitmap_info_t *binfo, size_t bit) {
 			gp = &bitmap[binfo->levels[i].group_offset + goff];
 			g = *gp;
 			propagate = (g == 0);
-			assert((g & (ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK)))
+			assert((g & (1LU << (bit & BITMAP_GROUP_NBITS_MASK)))
 			    == 0);
-			g ^= ZU(1) << (bit & BITMAP_GROUP_NBITS_MASK);
+			g ^= 1LU << (bit & BITMAP_GROUP_NBITS_MASK);
 			*gp = g;
-			if (!propagate) {
+			if (propagate == false)
 				break;
-			}
 		}
 	}
-#endif /* BITMAP_USE_TREE */
 }
 
-#endif /* JEMALLOC_INTERNAL_BITMAP_H */
+#endif
+
+#endif /* JEMALLOC_H_INLINES */
+/******************************************************************************/

deps/jemalloc/include/jemalloc/internal/cache_bin.h

@@ -1,114 +0,0 @@
-#ifndef JEMALLOC_INTERNAL_CACHE_BIN_H
-#define JEMALLOC_INTERNAL_CACHE_BIN_H
-
-#include "jemalloc/internal/ql.h"
-
-/*
- * The cache_bins are the mechanism that the tcache and the arena use to
- * communicate.  The tcache fills from and flushes to the arena by passing a
- * cache_bin_t to fill/flush.  When the arena needs to pull stats from the
- * tcaches associated with it, it does so by iterating over its
- * cache_bin_array_descriptor_t objects and reading out per-bin stats it
- * contains.  This makes it so that the arena need not know about the existence
- * of the tcache at all.
- */
-
-
-/*
- * The count of the number of cached allocations in a bin.  We make this signed
- * so that negative numbers can encode "invalid" states (e.g. a low water mark
- * of -1 for a cache that has been depleted).
- */
-typedef int32_t cache_bin_sz_t;
-
-typedef struct cache_bin_stats_s cache_bin_stats_t;
-struct cache_bin_stats_s {
-	/*
-	 * Number of allocation requests that corresponded to the size of this
-	 * bin.
-	 */
-	uint64_t nrequests;
-};
-
-/*
- * Read-only information associated with each element of tcache_t's tbins array
- * is stored separately, mainly to reduce memory usage.
- */
-typedef struct cache_bin_info_s cache_bin_info_t;
-struct cache_bin_info_s {
-	/* Upper limit on ncached. */
-	cache_bin_sz_t ncached_max;
-};
-
-typedef struct cache_bin_s cache_bin_t;
-struct cache_bin_s {
-	/* Min # cached since last GC. */
-	cache_bin_sz_t low_water;
-	/* # of cached objects. */
-	cache_bin_sz_t ncached;
-	/*
-	 * ncached and stats are both modified frequently.  Let's keep them
-	 * close so that they have a higher chance of being on the same
-	 * cacheline, thus less write-backs.
-	 */
-	cache_bin_stats_t tstats;
-	/*
-	 * Stack of available objects.
-	 *
-	 * To make use of adjacent cacheline prefetch, the items in the avail
-	 * stack goes to higher address for newer allocations.  avail points
-	 * just above the available space, which means that
-	 * avail[-ncached, ... -1] are available items and the lowest item will
-	 * be allocated first.
-	 */
-	void **avail;
-};
-
-typedef struct cache_bin_array_descriptor_s cache_bin_array_descriptor_t;
-struct cache_bin_array_descriptor_s {
-	/*
-	 * The arena keeps a list of the cache bins associated with it, for
-	 * stats collection.
-	 */
-	ql_elm(cache_bin_array_descriptor_t) link;
-	/* Pointers to the tcache bins. */
-	cache_bin_t *bins_small;
-	cache_bin_t *bins_large;
-};
-
-static inline void
-cache_bin_array_descriptor_init(cache_bin_array_descriptor_t *descriptor,
-    cache_bin_t *bins_small, cache_bin_t *bins_large) {
-	ql_elm_new(descriptor, link);
-	descriptor->bins_small = bins_small;
-	descriptor->bins_large = bins_large;
-}
-
-JEMALLOC_ALWAYS_INLINE void *
-cache_bin_alloc_easy(cache_bin_t *bin, bool *success) {
-	void *ret;
-
-	if (unlikely(bin->ncached == 0)) {
-		bin->low_water = -1;
-		*success = false;
-		return NULL;
-	}
-	/*
-	 * success (instead of ret) should be checked upon the return of this
-	 * function.  We avoid checking (ret == NULL) because there is never a
-	 * null stored on the avail stack (which is unknown to the compiler),
-	 * and eagerly checking ret would cause pipeline stall (waiting for the
-	 * cacheline).
-	 */
-	*success = true;
-	ret = *(bin->avail - bin->ncached);
-	bin->ncached--;
-
-	if (unlikely(bin->ncached < bin->low_water)) {
-		bin->low_water = bin->ncached;
-	}
-
-	return ret;
-}
-
-#endif /* JEMALLOC_INTERNAL_CACHE_BIN_H */

deps/jemalloc/include/jemalloc/internal/chunk.h

@@ -0,0 +1,63 @@
+/******************************************************************************/
+#ifdef JEMALLOC_H_TYPES
+
+/*
+ * Size and alignment of memory chunks that are allocated by the OS's virtual
+ * memory system.
+ */
+#define	LG_CHUNK_DEFAULT	22
+
+/* Return the chunk address for allocation address a. */
+#define	CHUNK_ADDR2BASE(a)						\
+	((void *)((uintptr_t)(a) & ~chunksize_mask))
+
+/* Return the chunk offset of address a. */
+#define	CHUNK_ADDR2OFFSET(a)						\
+	((size_t)((uintptr_t)(a) & chunksize_mask))
+
+/* Return the smallest chunk multiple that is >= s. */
+#define	CHUNK_CEILING(s)						\
+	(((s) + chunksize_mask) & ~chunksize_mask)
+
+#endif /* JEMALLOC_H_TYPES */
+/******************************************************************************/
+#ifdef JEMALLOC_H_STRUCTS
+
+#endif /* JEMALLOC_H_STRUCTS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_EXTERNS
+
+extern size_t		opt_lg_chunk;
+extern const char	*opt_dss;
+
+/* Protects stats_chunks; currently not used for any other purpose. */
+extern malloc_mutex_t	chunks_mtx;
+/* Chunk statistics. */
+extern chunk_stats_t	stats_chunks;
+
+extern rtree_t		*chunks_rtree;
+
+extern size_t		chunksize;
+extern size_t		chunksize_mask; /* (chunksize - 1). */
+extern size_t		chunk_npages;
+extern size_t		map_bias; /* Number of arena chunk header pages. */
+extern size_t		arena_maxclass; /* Max size class for arenas. */
+
+void	*chunk_alloc(size_t size, size_t alignment, bool base, bool *zero,
+    dss_prec_t dss_prec);
+void	chunk_unmap(void *chunk, size_t size);
+void	chunk_dealloc(void *chunk, size_t size, bool unmap);
+bool	chunk_boot(void);
+void	chunk_prefork(void);
+void	chunk_postfork_parent(void);
+void	chunk_postfork_child(void);
+
+#endif /* JEMALLOC_H_EXTERNS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_INLINES
+
+#endif /* JEMALLOC_H_INLINES */
+/******************************************************************************/
+
+#include "jemalloc/internal/chunk_dss.h"
+#include "jemalloc/internal/chunk_mmap.h"

deps/jemalloc/include/jemalloc/internal/chunk_dss.h

@@ -0,0 +1,38 @@
+/******************************************************************************/
+#ifdef JEMALLOC_H_TYPES
+
+typedef enum {
+	dss_prec_disabled  = 0,
+	dss_prec_primary   = 1,
+	dss_prec_secondary = 2,
+
+	dss_prec_limit     = 3
+} dss_prec_t ;
+#define	DSS_PREC_DEFAULT	dss_prec_secondary
+#define	DSS_DEFAULT		"secondary"
+
+#endif /* JEMALLOC_H_TYPES */
+/******************************************************************************/
+#ifdef JEMALLOC_H_STRUCTS
+
+extern const char *dss_prec_names[];
+
+#endif /* JEMALLOC_H_STRUCTS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_EXTERNS
+
+dss_prec_t	chunk_dss_prec_get(void);
+bool	chunk_dss_prec_set(dss_prec_t dss_prec);
+void	*chunk_alloc_dss(size_t size, size_t alignment, bool *zero);
+bool	chunk_in_dss(void *chunk);
+bool	chunk_dss_boot(void);
+void	chunk_dss_prefork(void);
+void	chunk_dss_postfork_parent(void);
+void	chunk_dss_postfork_child(void);
+
+#endif /* JEMALLOC_H_EXTERNS */
+/******************************************************************************/
+#ifdef JEMALLOC_H_INLINES
+
+#endif /* JEMALLOC_H_INLINES */
+/******************************************************************************/